Your message dated Sat, 30 Jul 2011 14:10:05 +0200 with message-id <[email protected]> and subject line Re: Lenny with kernel 2.6.26 can not be installed in text mode or hangs when Setting console screen modes and fonts has caused the Debian Bug report #516630, regarding Linux 2.6.26 hangs on some systems during console setup to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact [email protected] immediately.) -- 516630: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=516630 Debian Bug Tracking System Contact [email protected] with problems
--- Begin Message ---Package: Installation-reports Boot method: CD Image version: debian-500-i386-netinst.iso and debian-500-i686-netinst.iso Date: 22.02.2009 and earlier tries Machine: Processor: CPU1: Intel(R) Core(TM)2 CPU 6300 @ 1.86GHz stepping 06 Memory: Partitions: /dev/sdb2 ext2 20161204 4993492 14143572 27% / tmpfs tmpfs 517536 0 517536 0% /lib/init/rw udev tmpfs 10240 152 10088 2% /dev tmpfs tmpfs 517536 0 517536 0% /dev/shm /dev/sdb3 ext3 698852152 362107484 301245036 55% /home Output of lspci -knn (or lspci -nn): 00:00.0 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [110 6:0327] Kernel driver in use: agpgart-via Kernel modules: via-agp 00:00.1 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [110 6:1327] 00:00.2 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [110 6:2327] 00:00.3 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [110 6:3327] 00:00.4 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [110 6:4327] 00:00.5 PIC [0800]: VIA Technologies, Inc. P4M890 I/O APIC Interrupt Contr oller [1106:5327] 00:00.6 Host bridge [0600]: VIA Technologies, Inc. P4M890 Security Device [1106:6327] 00:00.7 Host bridge [0600]: VIA Technologies, Inc. P4M890 Host Bridge [110 6:7327] 00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8237/VX700 PCI Bridge [1106:b198] Kernel modules: shpchp 00:02.0 PCI bridge [0604]: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller [1106:a327] Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:03.0 PCI bridge [0604]: VIA Technologies, Inc. P4M890 PCI to PCI Bridge Controller [1106:c327] Kernel driver in use: pcieport-driver Kernel modules: shpchp 00:0f.0 RAID bus controller [0104]: VIA Technologies, Inc. VT8251 AHCI/SAT A 4-Port Controller [1106:3349] (rev 20) Kernel driver in use: ahci Kernel modules: ahci 00:0f.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/ A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 07) Kernel driver in use: VIA_IDE Kernel modules: via82cxxx 00:10.0 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1 .1 Controller [1106:3038] (rev 91) Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:10.1 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1 .1 Controller [1106:3038] (rev 91) Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:10.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1 .1 Controller [1106:3038] (rev 91) Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:10.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1 .1 Controller [1106:3038] (rev 91) Kernel driver in use: uhci_hcd Kernel modules: uhci-hcd 00:10.4 USB Controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 90) Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:11.0 ISA bridge [0601]: VIA Technologies, Inc. VT8251 PCI to ISA Bridge [1106:3287] Kernel modules: i2c-viapro 00:11.7 Host bridge [0600]: VIA Technologies, Inc. VT8251 Ultra VLINK Cont roller [1106:287e] 00:12.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-I I] [1106:3065] (rev 7c) Kernel driver in use: via-rhine Kernel modules: via-rhine 00:13.0 PCI bridge [0604]: VIA Technologies, Inc. VT8251 Host Bridge [1106 :287b] Kernel modules: shpchp 00:13.1 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCI to PCI Bridge [1106:287a] 02:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce 7650 GS [10de:0390] (rev a1) Kernel modules: nvidiafb 04:00.0 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCIE Root Port [1 106:287c] Kernel driver in use: pcieport-driver Kernel modules: shpchp 04:00.1 PCI bridge [0604]: VIA Technologies, Inc. VT8251 PCIE Root Port [1 106:287d] Kernel driver in use: pcieport-driver Kernel modules: shpchp 04:01.0 Audio device [0403]: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High Definition Audio Controller) [1106:3288] Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 07:09.0 Multimedia controller [0480]: Philips Semiconductors SAA7131/SAA71 33/SAA7135 Video Broadcast Decoder [1131:7133] (rev d1) Kernel driver in use: saa7134 Kernel modules: saa7134 07:0c.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev c0) Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci Base System Installation Checklist: [E] = Error (please elaborate below) Initial boot: [E] Detect network card: [0] Configure network: [0] Detect CD: [0] Load installer modules: [0] Detect hard drives: [0] Partition hard drives: [0] Install base system: [0] Clock/timezone setup: [0] User/password setup: [0] Install tasks: [0] Install boot loader: [0] Overall install: [0] Comments/Problems: I chanced to leny while Lenny was testing. Lenny works with kernel 2.6.25.2. When Lenny changed to 2.6.26 installation with apt seems to work, but did not start. Booting stops with: Setting console screen modes and fonts. I have to reset the computer. Now when Lenny is stable I tried again. The computer started with the image of the CD. I choose textual installation an the screen becomes black. I had to reset the computer. Doing the installation in graphical mode seems to work however when booting the newly installed system it still hangs with Setting console screen modes and fonts Because the system starts with 2.6.25 and does not start with 2.6.26 I think a peace of code is missing in 2.6.26 whitch is responsible for configuring the console. 2.6.26 hangs when when processing the script /etc/init.d/console-screen.sh and there when processing /usr/bin/consolechars When I commended out processing /etc/init.d/console-screen.sh then system hangs when starting X (I suggess) and has to be reseted.
--- End Message ---
--- Begin Message ---On Sun, May 02, 2010 at 08:53:03PM +0200, Moritz Muehlenhoff wrote: > tags 516630 moreinfo > thanks > > On Sun, Feb 22, 2009 at 08:56:34PM +0100, Christian Greif-Kettmann wrote: > > Package: Installation-reports > > > > I chanced to leny while Lenny was testing. Lenny works with kernel 2.6.25.2. > > When Lenny changed to 2.6.26 installation with apt seems to work, but did > > not > > start. Booting stops with: > > Setting console screen modes and fonts. > > I have to reset the computer. > > > > Now when Lenny is stable I tried again. The computer started with the image > > of > > the CD. I choose textual installation an the screen becomes black. I had to > > reset the computer. > > Doing the installation in graphical mode seems to work however when booting > > the newly installed system it still hangs with > > Setting console screen modes and fonts > > > > Because the system starts with 2.6.25 and does not start with 2.6.26 I > > think a > > peace of code is missing in 2.6.26 whitch is responsible for configuring > > the > > console. > > > > 2.6.26 hangs when when processing the script /etc/init.d/console-screen.sh > > and > > there when processing /usr/bin/consolechars > > > > When I commended out processing /etc/init.d/console-screen.sh then system > > hangs when starting X (I suggess) and has to be reseted. > > Hi, > Sorry for the late reply. > > The next release of Debian (6.0, code name Squeeze) will be based > on 2.6.32. Please test the current 2.6.32 from unstable/testing and tell > us whether the problem persists. If so, we should report it upstream > to the kernel.org developers. > > The 2.6.32 kernel is available from packages.debian.org and can > be installed in both Debian stable, testing and unstable > installations. No further feedback was provided, closing the bug. If the bug still occurs, please reopen. Cheers, Moritz
--- End Message ---
