Here is the result of dmesg from the initrd shell. "ls /dev/mapper" shows that some logical volumes are not present. The final message of dmesg is about a failure of vgchange.
All this confirm that the lvm track is worth investigations.
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (da...@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/lainie-sqroot ro quiet ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable) [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data) [ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-DFFFF uncachable [ 0.000000] E0000-EFFFF write-through [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007ff90000 [ 0.000000] 0000000000 - 007fe00000 page 2M [ 0.000000] 007fe00000 - 007ff90000 page 4k [ 0.000000] kernel direct mapping tables up to 7ff90000 @ 10000-14000 [ 0.000000] RAMDISK: 37558000 - 37fef33a [ 0.000000] ACPI: RSDP 00000000000fae70 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 000000007ff90000 00038 (v01 MSTEST TESTONLY 09000830 MSFT 00000097) [ 0.000000] ACPI: FACP 000000007ff90200 00084 (v02 MSTEST OEMFACP 09000830 MSFT 00000097) [ 0.000000] ACPI: DSDT 000000007ff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113) [ 0.000000] ACPI: FACS 000000007ff9e000 00040 [ 0.000000] ACPI: APIC 000000007ff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097) [ 0.000000] ACPI: MCFG 000000007ff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097) [ 0.000000] ACPI: OEMB 000000007ff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097) [ 0.000000] ACPI: HPET 000000007ff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007ff90000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007ff90000 [ 0.000000] NODE_DATA [0000000000012000 - 0000000000019fff] [ 0.000000] bootmap [000000000001a000 - 0000000000029ff7] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007ff90000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000168a454] TEXT DATA BSS ==> [0001000000 - 000168a454] [ 0.000000] #3 [0037558000 - 0037fef33a] RAMDISK ==> [0037558000 - 0037fef33a] [ 0.000000] #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] [ 0.000000] #5 [000168b000 - 000168b290] BRK ==> [000168b000 - 000168b290] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001c00000-ffff8800037fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0007ff90 [ 0.000000] On node 0 totalpages: 524063 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 101 pages reserved [ 0.000000] DMA zone: 3826 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7111 pages used for memmap [ 0.000000] DMA32 zone: 512969 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880001800000 s90328 r8192 d24360 u524288 [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 516795 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/mapper/lainie-sqroot ro quiet ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2049228k/2096704k available (3081k kernel code, 452k absent, 47024k reserved, 1890k data, 592k init) [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3400.150 MHz processor. [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.30 BogoMIPS (lpj=13600600) [ 0.004020] Security Framework initialized [ 0.004024] SELinux: Disabled at boot. [ 0.004129] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.005114] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.005564] Mount-cache hash table entries: 256 [ 0.005677] Initializing cgroup subsys ns [ 0.005681] Initializing cgroup subsys cpuacct [ 0.005684] Initializing cgroup subsys devices [ 0.005685] Initializing cgroup subsys freezer [ 0.005686] Initializing cgroup subsys net_cls [ 0.005704] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.005705] CPU: L2 cache: 3072K [ 0.005707] CPU 0/0x0 -> Node 0 [ 0.005709] CPU: Physical Processor ID: 0 [ 0.005710] CPU: Processor Core ID: 0 [ 0.005712] mce: CPU supports 6 MCE banks [ 0.005718] CPU0: Thermal monitoring enabled (TM2) [ 0.005721] using mwait in idle threads. [ 0.005722] Performance Events: Core2 events, Intel PMU driver. [ 0.005726] ... version: 2 [ 0.005727] ... bit width: 40 [ 0.005728] ... generic registers: 2 [ 0.005729] ... value mask: 000000ffffffffff [ 0.005730] ... max period: 000000007fffffff [ 0.005731] ... fixed-purpose events: 3 [ 0.005731] ... event mask: 0000000700000003 [ 0.006410] ACPI: Core revision 20090903 [ 0.016065] Setting APIC routing to flat [ 0.016354] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.057214] CPU0: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.060001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.008000] Initializing CPU#1 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 3072K [ 0.008000] CPU 1/0x1 -> Node 0 [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 1 [ 0.008000] CPU1: Thermal monitoring enabled (TM2) [ 0.144101] CPU1: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.144106] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.148083] Booting processor 2 APIC 0x2 ip 0x6000 [ 0.008000] Initializing CPU#2 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 3072K [ 0.008000] CPU 2/0x2 -> Node 0 [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 2 [ 0.008000] CPU2: Thermal monitoring enabled (TM2) [ 0.236020] CPU2: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.236025] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 0.240055] Booting processor 3 APIC 0x3 ip 0x6000 [ 0.008000] Initializing CPU#3 [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.008000] CPU: L2 cache: 3072K [ 0.008000] CPU 3/0x3 -> Node 0 [ 0.008000] CPU: Physical Processor ID: 0 [ 0.008000] CPU: Processor Core ID: 3 [ 0.008000] CPU3: Thermal monitoring enabled (TM2) [ 0.328093] CPU3: Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz stepping 0a [ 0.328098] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 0.332009] Brought up 4 CPUs [ 0.332011] Total of 4 processors activated (27204.12 BogoMIPS). [ 0.333519] CPU0 attaching sched-domain: [ 0.333521] domain 0: span 0-1 level MC [ 0.333523] groups: 0 1 [ 0.333525] domain 1: span 0-3 level CPU [ 0.333527] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048) [ 0.333532] CPU1 attaching sched-domain: [ 0.333533] domain 0: span 0-1 level MC [ 0.333534] groups: 1 0 [ 0.333537] domain 1: span 0-3 level CPU [ 0.333538] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048) [ 0.333541] CPU2 attaching sched-domain: [ 0.333542] domain 0: span 2-3 level MC [ 0.333544] groups: 2 3 [ 0.333546] domain 1: span 0-3 level CPU [ 0.333547] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048) [ 0.333550] CPU3 attaching sched-domain: [ 0.333552] domain 0: span 2-3 level MC [ 0.333553] groups: 3 2 [ 0.333555] domain 1: span 0-3 level CPU [ 0.333556] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048) [ 0.333642] devtmpfs: initialized [ 0.333702] regulator: core version 0.5 [ 0.333702] NET: Registered protocol family 16 [ 0.333702] ACPI: bus type pci registered [ 0.336017] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.336019] PCI: Not using MMCONFIG. [ 0.336020] PCI: Using configuration type 1 for base access [ 0.336237] bio: create slab <bio-0> at 0 [ 0.336397] ACPI: EC: Look up EC in DSDT [ 0.337834] ACPI: Executed 1 blocks of module-level executable AML code [ 0.345548] ACPI: Interpreter enabled [ 0.345550] ACPI: (supports S0 S1 S4 S5) [ 0.345566] ACPI: Using IOAPIC for interrupt routing [ 0.345600] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.347137] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.351185] PCI: Using MMCONFIG at e0000000 - efffffff [ 0.355772] ACPI Warning: Incorrect checksum in table [OEMB] - DB, should be DA (20090903/tbutils-314) [ 0.355849] ACPI: No dock devices found. [ 0.355930] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.355994] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.356003] pci 0000:00:01.0: PME# disabled [ 0.356047] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfbcfc000-0xfbcfffff] [ 0.356075] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.356077] pci 0000:00:1b.0: PME# disabled [ 0.356119] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.356121] pci 0000:00:1c.0: PME# disabled [ 0.356165] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.356168] pci 0000:00:1c.4: PME# disabled [ 0.356199] pci 0000:00:1d.0: reg 20 io port: [0xb480-0xb49f] [ 0.356232] pci 0000:00:1d.1: reg 20 io port: [0xb800-0xb81f] [ 0.356265] pci 0000:00:1d.2: reg 20 io port: [0xb880-0xb89f] [ 0.356300] pci 0000:00:1d.3: reg 20 io port: [0xbc00-0xbc1f] [ 0.356337] pci 0000:00:1d.7: reg 10 32bit mmio: [0xfbcfbc00-0xfbcfbfff] [ 0.356372] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.356375] pci 0000:00:1d.7: PME# disabled [ 0.356465] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 0.356500] pci 0000:00:1f.2: reg 10 io port: [0xa480-0xa487] [ 0.356503] pci 0000:00:1f.2: reg 14 io port: [0xa400-0xa403] [ 0.356507] pci 0000:00:1f.2: reg 18 io port: [0xa080-0xa087] [ 0.356511] pci 0000:00:1f.2: reg 1c io port: [0xa000-0xa003] [ 0.356514] pci 0000:00:1f.2: reg 20 io port: [0x9c00-0x9c0f] [ 0.356518] pci 0000:00:1f.2: reg 24 io port: [0x9880-0x988f] [ 0.356531] pci 0000:00:1f.2: PME# supported from D3hot [ 0.356533] pci 0000:00:1f.2: PME# disabled [ 0.356546] pci 0000:00:1f.3: reg 10 32bit mmio: [0x000000-0x0000ff] [ 0.356558] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f] [ 0.356583] pci 0000:00:1f.5: reg 10 io port: [0xb400-0xb407] [ 0.356587] pci 0000:00:1f.5: reg 14 io port: [0xb080-0xb083] [ 0.356590] pci 0000:00:1f.5: reg 18 io port: [0xb000-0xb007] [ 0.356594] pci 0000:00:1f.5: reg 1c io port: [0xac00-0xac03] [ 0.356598] pci 0000:00:1f.5: reg 20 io port: [0xa880-0xa88f] [ 0.356601] pci 0000:00:1f.5: reg 24 io port: [0xa800-0xa80f] [ 0.356614] pci 0000:00:1f.5: PME# supported from D3hot [ 0.356617] pci 0000:00:1f.5: PME# disabled [ 0.356646] pci 0000:00:01.0: bridge 64bit mmio pref: [0xcff00000-0xcfffffff] [ 0.356676] pci 0000:03:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.356685] pci 0000:03:00.0: reg 18 64bit mmio: [0xfbee0000-0xfbeeffff] [ 0.356690] pci 0000:03:00.0: reg 20 io port: [0xd000-0xd0ff] [ 0.356699] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfbec0000-0xfbedffff] [ 0.356719] pci 0000:03:00.0: supports D1 D2 [ 0.356755] pci 0000:03:00.1: reg 10 64bit mmio: [0xfbefc000-0xfbefffff] [ 0.356794] pci 0000:03:00.1: supports D1 D2 [ 0.364068] pci 0000:00:1c.0: bridge io port: [0xd000-0xdfff] [ 0.364071] pci 0000:00:1c.0: bridge 32bit mmio: [0xfbe00000-0xfbefffff] [ 0.364075] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff] [ 0.364146] pci 0000:02:00.0: reg 24 32bit mmio: [0xfbdfe000-0xfbdfffff] [ 0.364153] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfbde0000-0xfbdeffff] [ 0.364179] pci 0000:02:00.0: PME# supported from D3hot [ 0.364182] pci 0000:02:00.0: PME# disabled [ 0.364225] pci 0000:02:00.1: reg 10 io port: [0xcc00-0xcc07] [ 0.364232] pci 0000:02:00.1: reg 14 io port: [0xc880-0xc883] [ 0.364239] pci 0000:02:00.1: reg 18 io port: [0xc800-0xc807] [ 0.364246] pci 0000:02:00.1: reg 1c io port: [0xc480-0xc483] [ 0.364253] pci 0000:02:00.1: reg 20 io port: [0xc400-0xc40f] [ 0.364309] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.364360] pci 0000:00:1c.4: bridge io port: [0xc000-0xcfff] [ 0.364362] pci 0000:00:1c.4: bridge 32bit mmio: [0xfbd00000-0xfbdfffff] [ 0.364391] pci 0000:04:02.0: reg 10 io port: [0xec00-0xec1f] [ 0.364396] pci 0000:04:02.0: reg 14 io port: [0xe880-0xe8ff] [ 0.364426] pci 0000:04:02.0: supports D2 [ 0.364455] pci 0000:04:03.0: reg 10 32bit mmio: [0xfbfff800-0xfbffffff] [ 0.364460] pci 0000:04:03.0: reg 14 32bit mmio: [0xfbff8000-0xfbffbfff] [ 0.364492] pci 0000:04:03.0: supports D1 D2 [ 0.364493] pci 0000:04:03.0: PME# supported from D0 D1 D2 D3hot [ 0.364496] pci 0000:04:03.0: PME# disabled [ 0.364529] pci 0000:04:04.0: reg 10 32bit mmio: [0xfbff4000-0xfbff7fff] [ 0.364534] pci 0000:04:04.0: reg 14 io port: [0xe400-0xe4ff] [ 0.364552] pci 0000:04:04.0: reg 30 32bit mmio pref: [0xfbfc0000-0xfbfdffff] [ 0.364569] pci 0000:04:04.0: supports D1 D2 [ 0.364570] pci 0000:04:04.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.364573] pci 0000:04:04.0: PME# disabled [ 0.364607] pci 0000:00:1e.0: transparent bridge [ 0.364610] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff] [ 0.364612] pci 0000:00:1e.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff] [ 0.364627] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.364719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] [ 0.364755] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.364827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 0.364867] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 0.367236] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.367309] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 0.367381] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 0.367452] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.367524] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.367598] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15) [ 0.367669] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15) [ 0.367741] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 0.367813] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.367817] vgaarb: loaded [ 0.367826] PCI: Using ACPI for IRQ routing [ 0.368017] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.368020] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.368026] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.376015] Switching to clocksource tsc [ 0.376824] pnp: PnP ACPI init [ 0.376839] ACPI: bus type pnp registered [ 0.378620] pnp: PnP ACPI: found 14 devices [ 0.378621] ACPI: ACPI bus type pnp unregistered [ 0.378633] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved [ 0.378638] system 00:07: ioport range 0x290-0x297 has been reserved [ 0.378642] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 0.378643] system 00:08: ioport range 0x800-0x87f has been reserved [ 0.378645] system 00:08: ioport range 0x480-0x4bf has been reserved [ 0.378647] system 00:08: iomem range 0xffafe000-0xffb0cbff could not be reserved [ 0.378649] system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved [ 0.378651] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.378652] system 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.378654] system 00:08: iomem range 0xfff00000-0xfffffffe has been reserved [ 0.378656] system 00:08: iomem range 0xfebfe000-0xfebfec00 has been reserved [ 0.378659] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved [ 0.378661] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.378665] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved [ 0.378669] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 0.378671] system 00:0d: iomem range 0xc0000-0xcffff has been reserved [ 0.378673] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 0.378674] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved [ 0.383398] pci 0000:04:04.0: BAR 6: address space collision on of device [0xfbfc0000-0xfbfdffff] [ 0.383463] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.383464] pci 0000:00:01.0: IO window: disabled [ 0.383466] pci 0000:00:01.0: MEM window: disabled [ 0.383468] pci 0000:00:01.0: PREFETCH window: 0x000000cff00000-0x000000cfffffff [ 0.383471] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:03 [ 0.383473] pci 0000:00:1c.0: IO window: 0xd000-0xdfff [ 0.383476] pci 0000:00:1c.0: MEM window: 0xfbe00000-0xfbefffff [ 0.383478] pci 0000:00:1c.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff [ 0.383482] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:02 [ 0.383484] pci 0000:00:1c.4: IO window: 0xc000-0xcfff [ 0.383487] pci 0000:00:1c.4: MEM window: 0xfbd00000-0xfbdfffff [ 0.383490] pci 0000:00:1c.4: PREFETCH window: 0x00000080000000-0x000000801fffff [ 0.383494] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.383496] pci 0000:00:1e.0: IO window: 0xe000-0xefff [ 0.383499] pci 0000:00:1e.0: MEM window: 0xfbf00000-0xfbffffff [ 0.383501] pci 0000:00:1e.0: PREFETCH window: 0x80200000-0x802fffff [ 0.383510] alloc irq_desc for 16 on node -1 [ 0.383513] alloc kstat_irqs on node -1 [ 0.383518] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.383520] pci 0000:00:01.0: setting latency timer to 64 [ 0.383525] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.383528] pci 0000:00:1c.0: setting latency timer to 64 [ 0.383533] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.383535] pci 0000:00:1c.4: setting latency timer to 64 [ 0.383539] pci 0000:00:1e.0: setting latency timer to 64 [ 0.383542] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.383543] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.383545] pci_bus 0000:01: resource 2 pref mem [0xcff00000-0xcfffffff] [ 0.383547] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff] [ 0.383548] pci_bus 0000:03: resource 1 mem: [0xfbe00000-0xfbefffff] [ 0.383549] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff] [ 0.383551] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff] [ 0.383552] pci_bus 0000:02: resource 1 mem: [0xfbd00000-0xfbdfffff] [ 0.383554] pci_bus 0000:02: resource 2 pref mem [0x80000000-0x801fffff] [ 0.383555] pci_bus 0000:04: resource 0 io: [0xe000-0xefff] [ 0.383556] pci_bus 0000:04: resource 1 mem: [0xfbf00000-0xfbffffff] [ 0.383558] pci_bus 0000:04: resource 2 pref mem [0x80200000-0x802fffff] [ 0.383559] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.383561] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.383582] NET: Registered protocol family 2 [ 0.383666] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.384089] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.386076] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.386555] TCP: Hash tables configured (established 262144 bind 65536) [ 0.386557] TCP reno registered [ 0.386654] NET: Registered protocol family 1 [ 0.386749] pci 0000:03:00.0: Boot video device [ 0.386807] Unpacking initramfs... [ 0.543424] Freeing initrd memory: 10844k freed [ 0.547422] audit: initializing netlink socket (disabled) [ 0.547433] type=2000 audit(1315246245.543:1): initialized [ 0.549432] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.550396] VFS: Disk quotas dquot_6.5.2 [ 0.550429] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.550481] msgmni has been set to 4023 [ 0.550750] alg: No test for stdrng (krng) [ 0.550790] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.550792] io scheduler noop registered [ 0.550793] io scheduler anticipatory registered [ 0.550794] io scheduler deadline registered [ 0.550812] io scheduler cfq registered (default) [ 0.550883] alloc irq_desc for 24 on node -1 [ 0.550884] alloc kstat_irqs on node -1 [ 0.550891] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X [ 0.550895] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.550954] alloc irq_desc for 25 on node -1 [ 0.550955] alloc kstat_irqs on node -1 [ 0.550960] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X [ 0.550964] pcieport 0000:00:1c.0: setting latency timer to 64 [ 0.551037] alloc irq_desc for 26 on node -1 [ 0.551038] alloc kstat_irqs on node -1 [ 0.551042] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X [ 0.551047] pcieport 0000:00:1c.4: setting latency timer to 64 [ 0.552011] Linux agpgart interface v0.103 [ 0.552046] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.552120] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.552313] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.552422] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.552454] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.552455] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.553015] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.553064] mice: PS/2 mouse device common for all mice [ 0.553090] rtc_cmos 00:03: RTC can wake from S4 [ 0.553109] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.553128] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.553137] cpuidle: using governor ladder [ 0.553138] cpuidle: using governor menu [ 0.553142] No iBFT detected. [ 0.553332] TCP cubic registered [ 0.553395] NET: Registered protocol family 10 [ 0.553830] Mobile IPv6 [ 0.553832] NET: Registered protocol family 17 [ 0.553885] PM: Resume from disk failed. [ 0.553890] registered taskstats version 1 [ 0.554166] rtc_cmos 00:03: setting system clock to 2011-09-05 18:10:46 UTC (1315246246) [ 0.554187] Initalizing network drop monitor service [ 0.554216] Freeing unused kernel memory: 592k freed [ 0.554364] Write protecting the kernel read-only data: 4236k [ 0.575272] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.598214] udev[79]: starting version 164 [ 0.637712] usbcore: registered new interface driver usbfs [ 0.637792] usbcore: registered new interface driver hub [ 0.637881] usbcore: registered new device driver usb [ 0.642708] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.642754] alloc irq_desc for 23 on node -1 [ 0.642757] alloc kstat_irqs on node -1 [ 0.642767] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.642789] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 0.642792] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 0.642817] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 0.642853] ehci_hcd 0000:00:1d.7: debug port 1 [ 0.642955] SCSI subsystem initialized [ 0.646742] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 0.646753] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbcfbc00 [ 0.650996] libata version 3.00 loaded. [ 0.651685] pata_jmicron 0000:02:00.1: enabling device (0000 -> 0001) [ 0.651695] alloc irq_desc for 17 on node -1 [ 0.651696] alloc kstat_irqs on node -1 [ 0.651705] pata_jmicron 0000:02:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.651731] pata_jmicron 0000:02:00.1: setting latency timer to 64 [ 0.651787] scsi0 : pata_jmicron [ 0.651926] scsi1 : pata_jmicron [ 0.652494] ata1: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 17 [ 0.652496] ata2: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 17 [ 0.652691] alloc irq_desc for 19 on node -1 [ 0.652692] alloc kstat_irqs on node -1 [ 0.652695] skge 0000:04:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 0.652724] skge 1.13 addr 0xfbff4000 irq 19 chip Yukon-Lite rev 9 [ 0.653122] skge eth0: addr 00:17:31:67:bb:30 [ 0.654753] ahci 0000:02:00.0: version 3.0 [ 0.654773] ahci 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.659918] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 0.659937] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.659939] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.659941] usb usb1: Product: EHCI Host Controller [ 0.659943] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd [ 0.659944] usb usb1: SerialNumber: 0000:00:1d.7 [ 0.660015] usb usb1: configuration #1 chosen from 1 choice [ 0.660034] hub 1-0:1.0: USB hub found [ 0.660039] hub 1-0:1.0: 8 ports detected [ 0.660092] ata_piix 0000:00:1f.2: version 2.13 [ 0.660100] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.660103] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 0.660135] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 0.660188] scsi2 : ata_piix [ 0.660258] scsi3 : ata_piix [ 0.661618] ata3: SATA max UDMA/133 cmd 0xa480 ctl 0xa400 bmdma 0x9c00 irq 19 [ 0.661621] ata4: SATA max UDMA/133 cmd 0xa080 ctl 0xa000 bmdma 0x9c08 irq 19 [ 0.661646] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.661652] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 0.661700] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 0.661745] scsi4 : ata_piix [ 0.661790] scsi5 : ata_piix [ 0.662675] ata5: SATA max UDMA/133 cmd 0xb400 ctl 0xb080 bmdma 0xa880 irq 19 [ 0.662678] ata6: SATA max UDMA/133 cmd 0xb000 ctl 0xac00 bmdma 0xa888 irq 19 [ 0.667858] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 0.667861] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 0.667866] ahci 0000:02:00.0: setting latency timer to 64 [ 0.668016] scsi6 : ahci [ 0.668076] scsi7 : ahci [ 0.668128] ata7: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe100 irq 16 [ 0.668131] ata8: SATA max UDMA/133 abar m8192@0xfbdfe000 port 0xfbdfe180 irq 16 [ 0.753589] uhci_hcd: USB Universal Host Controller Interface driver [ 0.753632] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 0.753639] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 0.753641] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 0.753647] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.753672] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b480 [ 0.753696] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.753697] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.753699] usb usb2: Product: UHCI Host Controller [ 0.753700] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 0.753701] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.753783] usb usb2: configuration #1 chosen from 1 choice [ 0.753819] hub 2-0:1.0: USB hub found [ 0.753823] hub 2-0:1.0: 2 ports detected [ 0.753855] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 0.753859] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 0.753861] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 0.753866] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 0.753885] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b800 [ 0.753906] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.753907] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.753909] usb usb3: Product: UHCI Host Controller [ 0.753910] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 0.753911] usb usb3: SerialNumber: 0000:00:1d.1 [ 0.753947] usb usb3: configuration #1 chosen from 1 choice [ 0.753963] hub 3-0:1.0: USB hub found [ 0.753967] hub 3-0:1.0: 2 ports detected [ 0.753998] alloc irq_desc for 18 on node -1 [ 0.753999] alloc kstat_irqs on node -1 [ 0.754004] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.754007] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 0.754009] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 0.754014] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 0.754041] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b880 [ 0.754063] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.754065] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.754066] usb usb4: Product: UHCI Host Controller [ 0.754067] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 0.754068] usb usb4: SerialNumber: 0000:00:1d.2 [ 0.754102] usb usb4: configuration #1 chosen from 1 choice [ 0.754119] hub 4-0:1.0: USB hub found [ 0.754122] hub 4-0:1.0: 2 ports detected [ 0.754152] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16 [ 0.754156] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 0.754158] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 0.754163] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 0.754182] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000bc00 [ 0.754207] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.754208] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.754209] usb usb5: Product: UHCI Host Controller [ 0.754211] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd [ 0.754212] usb usb5: SerialNumber: 0000:00:1d.3 [ 0.754274] usb usb5: configuration #1 chosen from 1 choice [ 0.754311] hub 5-0:1.0: USB hub found [ 0.754315] hub 5-0:1.0: 2 ports detected [ 0.824352] ata1.00: ATAPI: ATAPI DVD RW 4XMax, 2.11, max UDMA/33 [ 0.824376] ata1.01: ATAPI: PLEXTOR DVD-ROM PX-130A, 1.01, max UDMA/100 [ 0.840362] ata1.00: configured for UDMA/33 [ 0.856365] ata1.01: configured for UDMA/100 [ 0.859010] scsi 0:0:0:0: CD-ROM ATAPI DVD RW 4XMax 2.11 PQ: 0 ANSI: 5 [ 0.859929] scsi 0:0:1:0: CD-ROM PLEXTOR DVD-ROM PX-130A 1.01 PQ: 0 ANSI: 5 [ 0.987885] ata8: SATA link down (SStatus 0 SControl 300) [ 0.987997] ata7: SATA link down (SStatus 0 SControl 300) [ 0.990441] ata5: SATA link down (SStatus 0 SControl 300) [ 1.136043] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.164264] ata6.00: ATA-8: SAMSUNG HD321KJ, CP100-10, max UDMA7 [ 1.164267] ata6.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.172278] ata6.00: configured for UDMA/133 [ 1.212013] usb 3-1: new low speed USB device using uhci_hcd and address 2 [ 1.456053] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.456062] ata3.01: SATA link down (SStatus 0 SControl 300) [ 1.456169] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.456177] ata4.01: SATA link down (SStatus 0 SControl 300) [ 1.464284] ata3.00: ATA-7: WDC WD2500JS-00NCB1, 10.02E02, max UDMA/133 [ 1.464286] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.472287] ata3.00: configured for UDMA/133 [ 1.472381] scsi 2:0:0:0: Direct-Access ATA WDC WD2500JS-00N 10.0 PQ: 0 ANSI: 5 [ 1.504739] ata4.00: ATA-7: ST3250620AS, 3.AAC, max UDMA/133 [ 1.504741] ata4.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.571404] ata4.00: configured for UDMA/133 [ 1.571463] scsi 3:0:0:0: Direct-Access ATA ST3250620AS 3.AA PQ: 0 ANSI: 5 [ 1.571621] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD321KJ CP10 PQ: 0 ANSI: 5 [ 1.574501] alloc irq_desc for 21 on node -1 [ 1.574503] alloc kstat_irqs on node -1 [ 1.574511] firewire_ohci 0000:04:03.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 1.581131] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 1.581134] Uniform CD-ROM driver Revision: 3.20 [ 1.581213] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.584827] sr1: scsi3-mmc drive: 0x/50x cd/rw xa/form2 cdda tray [ 1.584891] sr 0:0:1:0: Attached scsi CD-ROM sr1 [ 1.584981] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.585031] sd 3:0:0:0: [sdb] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.585070] sd 3:0:0:0: [sdb] Write Protect is off [ 1.585071] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.585074] sd 5:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.585086] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.585106] sd 5:0:0:0: [sdc] Write Protect is off [ 1.585108] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.585201] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.585259] sd 2:0:0:0: [sda] Write Protect is off [ 1.585260] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.585269] sdb: [ 1.585355] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.585403] sdc: [ 1.585496] sda: sda1 sda2 sda3 [ 1.595149] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.611046] sdb1 sdb2 sdb3 [ 1.611221] sd 3:0:0:0: [sdb] Attached SCSI disk [ 1.617872] sdc1 sdc2 sdc3 < sdc5 sdc6 [ 1.644007] firewire_ohci: Added fw-ohci device 0000:04:03.0, OHCI version 1.10 [ 1.662296] sdc7 > sdc4 [ 1.682596] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.682620] sr 0:0:1:0: Attached scsi generic sg1 type 5 [ 1.682640] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.682670] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.682691] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 1.701746] sd 5:0:0:0: [sdc] Attached SCSI disk [ 2.056818] md: raid0 personality registered for level 0 [ 2.058628] md: raid1 personality registered for level 1 [ 2.094531] md: md0 stopped. [ 2.095312] md: bind<sdb3> [ 2.095451] md: bind<sda3> [ 2.096298] raid0: looking at sda3 [ 2.096300] raid0: comparing sda3(235882240) [ 2.096301] with sda3(235882240) [ 2.096302] raid0: END [ 2.096302] raid0: ==> UNIQUE [ 2.096303] raid0: 1 zones [ 2.096304] raid0: looking at sdb3 [ 2.096305] raid0: comparing sdb3(235882240) [ 2.096306] with sda3(235882240) [ 2.096307] raid0: EQUAL [ 2.096308] raid0: FINAL 1 zones [ 2.096310] raid0: done. [ 2.096311] raid0 : md_size is 471764480 sectors. [ 2.096312] ******* md0 configuration ********* [ 2.096313] zone0=[sda3/sdb3/] [ 2.096315] zone offset=0kb device offset=0kb size=235882240kb [ 2.096316] ********************************** [ 2.096316] [ 2.096322] md0: detected capacity change from 0 to 241543413760 [ 2.096929] md0: unknown partition table [ 2.112493] md: md1 stopped. [ 2.113085] md: bind<sdb2> [ 2.113222] md: bind<sda2> [ 2.114073] raid1: raid set md1 active with 2 out of 2 mirrors [ 2.114099] md1: detected capacity change from 0 to 129029898240 [ 2.114817] md1: unknown partition table [ 2.119518] device-mapper: uevent: version 1.0.3 [ 2.119706] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-de...@redhat.com [ 2.144570] firewire_core: created device fw0: GUID 0011d80000c7e76a, S400 [ 2.351169] PM: Starting manual resume from disk [ 2.351171] PM: Resume from partition 8:34 [ 2.351172] PM: Checking hibernation image. [ 2.351964] PM: Error -22 checking image file [ 2.351966] PM: Resume from disk failed. [ 2.359311] EXT3-fs: INFO: recovery required on readonly filesystem. [ 2.359313] EXT3-fs: write access will be enabled during recovery. [ 2.397577] kjournald starting. Commit interval 5 seconds [ 2.397581] EXT3-fs: recovery complete. [ 2.397865] EXT3-fs: mounted filesystem with ordered data mode. [ 2.547193] usb 3-1: New USB device found, idVendor=0463, idProduct=ffff [ 2.547195] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=4 [ 2.547197] usb 3-1: Product: ELLIPSE [ 2.547199] usb 3-1: Manufacturer: MGE OPS SYSTEMS [ 2.547200] usb 3-1: SerialNumber: BDCJ510H2 [ 2.547272] usb 3-1: configuration #1 chosen from 1 choice [ 2.792009] usb 3-2: new low speed USB device using uhci_hcd and address 3 [ 2.968254] usb 3-2: New USB device found, idVendor=046d, idProduct=c00e [ 2.968257] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.968259] usb 3-2: Product: USB-PS/2 Optical Mouse [ 2.968260] usb 3-2: Manufacturer: Logitech [ 2.968320] usb 3-2: configuration #1 chosen from 1 choice [ 3.439896] udev[496]: starting version 164 [ 3.583586] ACPI: SSDT 000000007ff9e0c0 001C6 (v01 AMI CPU1PM 00000001 INTL 20060113) [ 3.583781] processor LNXCPU:00: registered as cooling_device0 [ 3.584001] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 3.584006] ACPI: Power Button [PWRB] [ 3.584040] ACPI: SSDT 000000007ff9e290 0013A (v01 AMI CPU2PM 00000001 INTL 20060113) [ 3.584194] processor LNXCPU:01: registered as cooling_device1 [ 3.584233] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 3.584235] ACPI: Power Button [PWRF] [ 3.584689] ACPI: SSDT 000000007ff9e3d0 0013A (v01 AMI CPU3PM 00000001 INTL 20060113) [ 3.584891] processor LNXCPU:02: registered as cooling_device2 [ 3.585147] ACPI: SSDT 000000007ff9e510 0013A (v01 AMI CPU4PM 00000001 INTL 20060113) [ 3.585351] processor LNXCPU:03: registered as cooling_device3 [ 3.672584] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 4.039021] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 4.039028] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 4.039031] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f] [ 4.039076] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.206157] usbcore: registered new interface driver hiddev [ 4.238505] [drm] Initialized drm 1.1.0 20060810 [ 4.513224] [drm] radeon kernel modesetting enabled. [ 4.514624] radeon 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.514629] radeon 0000:03:00.0: setting latency timer to 64 [ 4.516296] [drm] radeon: Initializing kernel modesetting. [ 4.516430] [drm] register mmio base: 0xFBEE0000 [ 4.516431] [drm] register mmio size: 65536 [ 4.521022] ATOM BIOS: 11X [ 4.521034] [drm] Clocks initialized ! [ 4.522359] [drm] Detected VRAM RAM=256M, BAR=256M [ 4.522361] [drm] RAM width 256bits DDR [ 4.522423] [TTM] Zone kernel: Available graphics memory: 1030334 kiB. [ 4.522435] [drm] radeon: 256M of VRAM memory ready [ 4.522436] [drm] radeon: 512M of GTT memory ready. [ 4.522485] alloc irq_desc for 27 on node -1 [ 4.522487] alloc kstat_irqs on node -1 [ 4.522501] radeon 0000:03:00.0: irq 27 for MSI/MSI-X [ 4.522507] radeon 0000:03:00.0: radeon: using MSI. [ 4.522537] [drm] radeon: irq initialized. [ 4.522539] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 4.522881] [drm] Loading RV670 Microcode [ 4.522884] platform radeon_cp.0: firmware: requesting radeon/RV670_pfp.bin [ 4.544560] r600_cp: Failed to load firmware "radeon/RV670_pfp.bin" [ 4.544607] [drm:r600_startup] *ERROR* Failed to load firmware! [ 4.544651] radeon 0000:03:00.0: disabling GPU acceleration [ 4.544718] radeon 0000:03:00.0: ffff88007e044000 unpin not necessary [ 4.544720] radeon 0000:03:00.0: ffff88007e044000 unpin not necessary [ 4.544730] [drm] Enabling audio support [ 4.544884] [drm] Default TV standard: PAL [ 4.544934] [drm] Radeon Display Connectors [ 4.544935] [drm] Connector 0: [ 4.544936] [drm] DVI-I [ 4.544937] [drm] HPD1 [ 4.544938] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 4.544939] [drm] Encoders: [ 4.544940] [drm] DFP1: INTERNAL_KLDSCP_TMDS1 [ 4.544941] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 4.544942] [drm] Connector 1: [ 4.544943] [drm] DIN [ 4.544943] [drm] Encoders: [ 4.544944] [drm] TV1: INTERNAL_KLDSCP_DAC2 [ 4.544945] [drm] Connector 2: [ 4.544946] [drm] DVI-I [ 4.544946] [drm] HPD2 [ 4.544948] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 4.544949] [drm] Encoders: [ 4.544949] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 4.544950] [drm] DFP2: INTERNAL_LVTM1 [ 4.658735] alloc irq_desc for 22 on node -1 [ 4.658738] alloc kstat_irqs on node -1 [ 4.658746] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 4.658790] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 4.904985] [drm] fb mappable at 0xD0040000 [ 4.904987] [drm] vram apper at 0xD0000000 [ 4.904988] [drm] size 9216000 [ 4.904989] [drm] fb depth is 24 [ 4.904989] [drm] pitch is 7680 [ 4.905566] ICE1724 0000:04:02.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 4.939529] Console: switching to colour frame buffer device 240x75 [ 4.967914] fb0: radeondrmfb frame buffer device [ 4.967915] registered panic notifier [ 4.967919] [drm] Initialized radeon 2.0.0 20080528 for 0000:03:00.0 on minor 0 [ 5.102983] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5 [ 5.105033] HDA Intel 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 5.105054] HDA Intel 0000:03:00.1: setting latency timer to 64 [ 7.932130] generic-usb 0003:0463:FFFF.0001: hiddev0,hidraw0: USB HID v1.00 Device [MGE OPS SYSTEMS ELLIPSE] on usb-0000:00:1d.1-1/input0 [ 7.945204] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6 [ 7.945256] generic-usb 0003:046D:C00E.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0 [ 7.945270] usbcore: registered new interface driver usbhid [ 7.945272] usbhid: v2.6:USB HID core driver [ 8.320408] Adding 1951888k swap on /dev/sdc2. Priority:-1 extents:1 across:1951888k [ 8.436122] EXT3 FS on dm-0, internal journal [ 8.619048] loop: module loaded [ 9.570121] general protection fault: 0000 [#1] SMP [ 9.570269] last sysfs file: /sys/devices/virtual/block/dm-7/removable [ 9.570379] CPU 2 [ 9.570442] Modules linked in: loop firewire_sbp2 dm_crypt snd_hda_codec_atihdmi snd_hda_codec_analog snd_ice1724 snd_seq_midi snd_seq_midi_event snd_rawmidi snd_ice17xx_ak4xxx snd_ac97_codec snd_hda_intel ac97_bus snd_ak4xxx_adda snd_ak4114 snd_hda_codec snd_pt2258 snd_hwdep snd_i2c radeon snd_pcm snd_seq ttm snd_timer snd_seq_device drm_kms_helper snd drm usbhid soundcore i2c_algo_bit i2c_i801 snd_page_alloc i2c_core hid evdev pcspkr button processor asus_atk0110 ext3 jbd mbcache dm_mod raid1 raid0 md_mod sg sd_mod crc_t10dif sr_mod cdrom firewire_ohci firewire_core uhci_hcd ata_generic ata_piix ahci crc_itu_t skge pata_jmicron libata ehci_hcd scsi_mod usbcore nls_base thermal thermal_sys [last unloaded: scsi_wait_scan] [ 9.572854] Pid: 1038, comm: vgchange Not tainted 2.6.32-5-amd64 #1 System Product Name [ 9.572977] RIP: 0010:[<ffffffff810e7828>] [<ffffffff810e7828>] __kmalloc_track_caller+0xcd/0x13c [ 9.573008] RSP: 0018:ffff88007ea1fbf8 EFLAGS: 00010086 [ 9.573008] RAX: 0000000000000000 RBX: f000eef3f000eef3 RCX: 0000000000000008 [ 9.573008] RDX: ffff8800019120b0 RSI: 00000000000000d0 RDI: 0000000000000003 [ 9.573008] RBP: 0000000000000246 R08: 00000008ffffffff R09: ffffffff8145e980 [ 9.573008] R10: 00000002019160c0 R11: ffffffffffff235d R12: ffffffff81453f10 [ 9.573008] R13: 00000000000000d0 R14: 00000000000000d0 R15: 0000000000000006 [ 9.573008] FS: 00007f5cd931e7a0(0000) GS:ffff880001900000(0000) knlGS:0000000000000000 [ 9.573008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 9.573008] CR2: 00007f5cd9336000 CR3: 000000007e813000 CR4: 00000000000406e0 [ 9.573008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 9.573008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 9.573008] Process vgchange (pid: 1038, threadinfo ffff88007ea1e000, task ffff88007ddc0e20) [ 9.573008] Stack: [ 9.573008] 0000000000000001 ffffffff8113ffc5 0000000800000003 0000000000000006 [ 9.573008] <0> ffffffff813b0a5c ffffffff813b0a5c 0000000000000001 ffff88007ea1fd18 [ 9.573008] <0> 00000000000041ed ffffffff810c7297 00000000000000d0 0000000000000000 [ 9.573008] Call Trace: [ 9.573008] [<ffffffff8113ffc5>] ? sysfs_new_dirent+0x2a/0xf7 [ 9.573008] [<ffffffff810c7297>] ? kstrdup+0x2b/0x40 [ 9.573008] [<ffffffff8113ffc5>] ? sysfs_new_dirent+0x2a/0xf7 [ 9.573008] [<ffffffff8114043d>] ? create_dir+0x2d/0x7c [ 9.573008] [<ffffffff81141814>] ? internal_create_group+0x51/0x15a [ 9.573008] [<ffffffff81180ff6>] ? blk_register_queue+0xbe/0xcc [ 9.573008] [<ffffffff81184dfd>] ? add_disk+0xb8/0x108 [ 9.573008] [<ffffffffa019601a>] ? dm_create+0x420/0x545 [dm_mod] [ 9.573008] [<ffffffffa019b660>] ? dev_create+0x0/0x2e9 [dm_mod] [ 9.573008] [<ffffffffa019b6c9>] ? dev_create+0x69/0x2e9 [dm_mod] [ 9.573008] [<ffffffffa019b660>] ? dev_create+0x0/0x2e9 [dm_mod] [ 9.573008] [<ffffffffa019bbc0>] ? ctl_ioctl+0x1c6/0x20e [dm_mod] [ 9.573008] [<ffffffffa019bc16>] ? dm_ctl_ioctl+0xe/0x12 [dm_mod] [ 9.573008] [<ffffffff810fa9a6>] ? vfs_ioctl+0x21/0x6c [ 9.573008] [<ffffffff810faef4>] ? do_vfs_ioctl+0x48d/0x4cb [ 9.573008] [<ffffffff810f2163>] ? sys_newstat+0x23/0x30 [ 9.573008] [<ffffffff810faf83>] ? sys_ioctl+0x51/0x70 [ 9.573008] [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b [ 9.573008] Code: fa 66 0f 1f 44 00 00 65 8b 04 25 a8 e3 00 00 48 98 49 8b 94 c4 f0 02 00 00 8b 4a 18 89 4c 24 14 48 8b 1a 48 85 db 74 0c 8b 42 14 <48> 8b 04 c3 48 89 02 eb 19 48 8b 4c 24 08 49 89 d0 44 89 ee 83 [ 9.573008] RIP [<ffffffff810e7828>] __kmalloc_track_caller+0xcd/0x13c [ 9.573008] RSP <ffff88007ea1fbf8> [ 9.573008] ---[ end trace 7b941e567f2d4a32 ]---
