Your message dated Sat, 10 Dec 2011 19:17:23 +0000 with message-id <1323544643.25752.14.camel@deadeye> and subject line Re: Bug#651629: sky2: interface silently fails to set MTU if interface is down has caused the Debian Bug report #651629, regarding sky2: interface silently fails to set MTU if interface is down to be marked as done.
This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 651629: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=651629 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems
--- Begin Message ---Package: linux-2.6 Version: 2.6.32-38 Severity: normal When attempting to change the MTU of my eth0 interface, which is running the sky2 driver, it exhibits the following behavior: 1 ) If the interface is down, ifconfig returns no error message, but typing `ifconfig eth0` again shows the MTU has not changed. 2 ) If the interface is up, ifconfig returns no error message and the MTU is set correctly. This threw me off not long ago when attempting to diagnose an issue with my LAN's MTU. Either a fix allowing the MTU to be changed while the interface is down or a fix to show an error would be adequate. -- Package-specific info: ** Version: Linux version 2.6.32-5-openvz-686 (Debian 2.6.32-38) (b...@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Oct 3 06:36:30 UTC 2011 ** Command line: BOOT_IMAGE=/vmlinuz-2.6.32-5-openvz-686 root=UUID=e4bd53d8-5465-42ba-a6ad-4e7d7fed27a3 ro vga=775 quiet ** Not tainted ** Kernel log: [55683.639838] RAID10 conf printout: [55683.639849] --- wd:4 rd:4 [55683.639858] disk 0, wo:0, o:1, dev:sdc3 [55683.639866] disk 1, wo:0, o:1, dev:sda3 [55683.639873] disk 2, wo:0, o:1, dev:sdb3 [55683.639880] disk 3, wo:0, o:1, dev:sdd3 [77138.588803] usb 3-1.3: new full speed USB device using ohci_hcd and address 9 [77138.724808] usb 3-1.3: New USB device found, idVendor=04e7, idProduct=0073 [77138.724821] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [77138.724832] usb 3-1.3: Product: Elo TouchSystems Inc. APR Controller [77138.724841] usb 3-1.3: Manufacturer: Elo TouchSystems [77138.724848] usb 3-1.3: SerialNumber: T8226746 [77138.725006] usb 3-1.3: configuration #1 chosen from 1 choice [100487.221343] ip_tables: tcp match: only valid for protocol 6 [108094.523974] htb: too many events! [271760.352093] usb 6-1: new low speed USB device using ohci_hcd and address 2 [271760.522482] usb 6-1: New USB device found, idVendor=04fc, idProduct=05d8 [271760.522495] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [271760.522506] usb 6-1: Product: Wireless Keyboard& Laser Mouse [271760.522514] usb 6-1: Manufacturer: MLK [271760.522678] usb 6-1: configuration #1 chosen from 1 choice [271760.703098] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input5 [271760.703240] sunplus 0003:04FC:05D8.0004: input,hidraw0: USB HID v1.00 Keyboard [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input0 [271760.710480] sunplus 0003:04FC:05D8.0005: fixing up Sunplus Wireless Desktop report descriptor [271760.712491] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/input/input6 [271760.712749] sunplus 0003:04FC:05D8.0005: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input1 [281437.851930] hub 3-0:1.0: port 1 disabled by hub (EMI?), re-enabling... [281437.851946] usb 3-1: USB disconnect, address 8 [281437.851954] usb 3-1.3: USB disconnect, address 9 [281438.116087] usb 3-1: new full speed USB device using ohci_hcd and address 10 [281438.282933] usb 3-1: not running at top speed; connect to a high speed hub [281438.286913] usb 3-1: New USB device found, idVendor=0409, idProduct=0059 [281438.286925] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [281438.287080] usb 3-1: configuration #1 chosen from 1 choice [281438.289013] hub 3-1:1.0: USB hub found [281438.290928] hub 3-1:1.0: 4 ports detected [289255.418213] usb 6-1: USB disconnect, address 2 [289255.864085] usb 6-1: new low speed USB device using ohci_hcd and address 3 [289256.034763] usb 6-1: New USB device found, idVendor=04fc, idProduct=05d8 [289256.034776] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [289256.034787] usb 6-1: Product: Wireless Keyboard& Laser Mouse [289256.034795] usb 6-1: Manufacturer: MLK [289256.034942] usb 6-1: configuration #1 chosen from 1 choice [289256.049340] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input7 [289256.049462] sunplus 0003:04FC:05D8.0006: input,hidraw0: USB HID v1.00 Keyboard [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input0 [289256.059758] sunplus 0003:04FC:05D8.0007: fixing up Sunplus Wireless Desktop report descriptor [289256.061663] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/input/input8 [289256.061908] sunplus 0003:04FC:05D8.0007: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input1 [289367.760035] hub 6-0:1.0: port 1 disabled by hub (EMI?), re-enabling... [289367.760050] usb 6-1: USB disconnect, address 3 [289368.200064] usb 6-1: new low speed USB device using ohci_hcd and address 4 [289368.370021] usb 6-1: New USB device found, idVendor=04fc, idProduct=05d8 [289368.370033] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [289368.370044] usb 6-1: Product: Wireless Keyboard& Laser Mouse [289368.370052] usb 6-1: Manufacturer: MLK [289368.370201] usb 6-1: configuration #1 chosen from 1 choice [289368.384575] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input9 [289368.384699] sunplus 0003:04FC:05D8.0008: input,hidraw0: USB HID v1.00 Keyboard [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input0 [289368.395039] sunplus 0003:04FC:05D8.0009: fixing up Sunplus Wireless Desktop report descriptor [289368.396920] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/input/input10 [289368.397143] sunplus 0003:04FC:05D8.0009: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input1 [290651.031420] usb 6-1: USB disconnect, address 4 [290651.453731] usb 6-1: new low speed USB device using ohci_hcd and address 5 [290651.622518] usb 6-1: New USB device found, idVendor=04fc, idProduct=05d8 [290651.622530] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [290651.622540] usb 6-1: Product: Wireless Keyboard& Laser Mouse [290651.622549] usb 6-1: Manufacturer: MLK [290651.622693] usb 6-1: configuration #1 chosen from 1 choice [290651.637046] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input11 [290651.637169] sunplus 0003:04FC:05D8.000A: input,hidraw0: USB HID v1.00 Keyboard [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input0 [290651.647569] sunplus 0003:04FC:05D8.000B: fixing up Sunplus Wireless Desktop report descriptor [290651.649390] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/input/input12 [290651.649612] sunplus 0003:04FC:05D8.000B: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input1 [291702.089535] hub 6-0:1.0: port 1 disabled by hub (EMI?), re-enabling... [291702.089550] usb 6-1: USB disconnect, address 5 [291702.512762] usb 6-1: new low speed USB device using ohci_hcd and address 6 [291702.684543] usb 6-1: New USB device found, idVendor=04fc, idProduct=05d8 [291702.684556] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [291702.684566] usb 6-1: Product: Wireless Keyboard& Laser Mouse [291702.684575] usb 6-1: Manufacturer: MLK [291702.684717] usb 6-1: configuration #1 chosen from 1 choice [291702.699065] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input13 [291702.699188] sunplus 0003:04FC:05D8.000C: input,hidraw0: USB HID v1.00 Keyboard [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input0 [291702.709539] sunplus 0003:04FC:05D8.000D: fixing up Sunplus Wireless Desktop report descriptor [291702.711446] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/input/input14 [291702.711665] sunplus 0003:04FC:05D8.000D: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input1 [295261.973558] usb 6-1: USB disconnect, address 6 [295262.372077] usb 6-1: new low speed USB device using ohci_hcd and address 7 [295262.542935] usb 6-1: New USB device found, idVendor=04fc, idProduct=05d8 [295262.543022] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [295262.543033] usb 6-1: Product: Wireless Keyboard& Laser Mouse [295262.543041] usb 6-1: Manufacturer: MLK [295262.543199] usb 6-1: configuration #1 chosen from 1 choice [295262.557473] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.0/input/input15 [295262.557598] sunplus 0003:04FC:05D8.000E: input,hidraw0: USB HID v1.00 Keyboard [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input0 [295262.567935] sunplus 0003:04FC:05D8.000F: fixing up Sunplus Wireless Desktop report descriptor [295262.569913] input: MLK Wireless Keyboard& Laser Mouse as /devices/pci0000:00/0000:00:13.1/usb6/6-1/6-1:1.1/input/input16 [295262.570135] sunplus 0003:04FC:05D8.000F: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK Wireless Keyboard& Laser Mouse] on usb-0000:00:13.1-1/input1 [320778.545645] UDP: short packet: From 85.204.62.45:60752 42098/111 to 70.60.53.140:9090 ** Model information not available ** Loaded modules: Module Size Used by hid_sunplus 981 0 r8168 180468 0 sky2 34423 0 joydev 6743 0 vzethdev 5593 0 vznetdev 11601 0 simfs 2535 0 vzrst 109010 0 vzcpt 93585 0 vzdquota 30157 0 [permanent] vzmon 12945 4 vzethdev,vznetdev,vzrst,vzcpt vzdev 1284 4 vzethdev,vznetdev,vzdquota,vzmon xt_hl 925 0 xt_tcpmss 1017 0 xt_TCPMSS 2315 0 xt_limit 1088 0 xt_dscp 1261 0 powernow_k8 9832 1 cpufreq_powersave 602 0 cpufreq_userspace 1480 0 cpufreq_conservative 4018 0 cpufreq_stats 1997 0 cls_u32 4710 1 xt_length 796 13 sch_sfq 3874 8 sch_htb 10427 1 xt_multiport 1775 7 xt_owner 1453 2 xt_CLASSIFY 617 34 iptable_mangle 2377 1 ipt_REDIRECT 831 5 ipt_MASQUERADE 897 1 xt_helper 879 1 ipt_REJECT 1521 2 xt_comment 599 45 xt_tcpudp 1743 71 xt_state 927 2 vzevent 1223 1 iptable_filter 1842 1 nf_nat_ftp 1519 0 iptable_nat 3615 1 nf_nat 10702 4 ipt_REDIRECT,ipt_MASQUERADE,nf_nat_ftp,iptable_nat nf_conntrack_ftp 4276 1 nf_nat_ftp nf_conntrack_ipv4 7835 6 iptable_nat,nf_nat nf_conntrack 38543 7 xt_helper,xt_state,nf_nat_ftp,iptable_nat,nf_nat,nf_conntrack_ftp,nf_conntrack_ipv4 nf_defrag_ipv4 795 1 nf_conntrack_ipv4 ip_tables 7838 3 iptable_mangle,iptable_filter,iptable_nat x_tables 8651 18 xt_hl,xt_tcpmss,xt_TCPMSS,xt_limit,xt_dscp,xt_length,xt_multiport,xt_owner,xt_CLASSIFY,ipt_REDIRECT,ipt_MASQUERADE,xt_helper,ipt_REJECT,xt_comment,xt_tcpudp,xt_state,iptable_nat,ip_tables bridge 33979 0 stp 996 1 bridge tun 10215 2 nls_utf8 908 1 isofs 24624 1 ext2 46421 1 hwmon_vid 1528 0 loop 9777 2 fuse 44954 1 snd_hda_codec_atihdmi 1687 1 usbhid 28068 0 hid 50925 2 hid_sunplus,usbhid snd_hda_codec_via 38583 1 snd_hda_intel 16911 2 snd_hda_codec 46002 3 snd_hda_codec_atihdmi,snd_hda_codec_via,snd_hda_intel snd_hwdep 4058 1 snd_hda_codec snd_pcm_oss 28695 0 snd_mixer_oss 10465 1 snd_pcm_oss radeon 539364 2 snd_pcm 47390 4 snd_hda_intel,snd_hda_codec,snd_pcm_oss ttm 33602 1 radeon snd_seq_midi 3576 0 drm_kms_helper 18569 1 radeon snd_rawmidi 12517 1 snd_seq_midi snd_seq_midi_event 3684 1 snd_seq_midi psmouse 44813 0 drm 112652 4 radeon,ttm,drm_kms_helper snd_seq 35475 2 snd_seq_midi,snd_seq_midi_event ata_generic 2247 0 i2c_algo_bit 3497 1 radeon i2c_piix4 7124 0 snd_timer 12274 2 snd_pcm,snd_seq pcspkr 1207 0 serio_raw 2920 0 firewire_ohci 17013 0 snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq evdev 5613 11 ohci_hcd 17195 0 pata_atiixp 2545 0 i2c_core 12787 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_piix4 firewire_core 31299 1 firewire_ohci asus_atk0110 6770 0 k10temp 1979 0 wmi 3575 0 processor 26355 7 powernow_k8 button 3606 0 ehci_hcd 29117 0 snd 34439 14 snd_hda_codec_via,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device crc_itu_t 1035 1 firewire_core soundcore 3454 1 snd snd_page_alloc 5121 2 snd_hda_intel,snd_pcm raid10 16733 1 raid1 16375 1 md_mod 67401 7 raid10,raid1 ata_piix 17788 0 ext4 256872 1 mbcache 3762 2 ext2,ext4 jbd2 56187 1 ext4 crc16 1027 1 ext4 xhci 30113 0 usbcore 99413 6 usbhid,ohci_hcd,ehci_hcd,xhci nls_base 4541 3 nls_utf8,isofs,usbcore sd_mod 26009 12 crc_t10dif 1012 1 sd_mod pata_marvell 1705 0 ahci 27430 8 libata 116205 5 ata_generic,pata_atiixp,ata_piix,pata_marvell,ahci thermal 9226 0 scsi_mod 104909 2 sd_mod,libata thermal_sys 9378 2 processor,thermal ** Network interface configuration: auto lo iface lo inet loopback allow-hotplug wan iface wan inet dhcp auto lan iface lan inet static bridge_ports tap0 eth0 pre-up /etc/network/lan_up.sh bridge_stp off bridge_fd 0 address 10.0.1.1 netmask 255.255.254.0 mtu 9216 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 6: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN link/void 19: wan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc htb state UP qlen 1000 link/ether 00:50:43:00:e9:40 brd ff:ff:ff:ff:ff:ff inet XX.XX.XX.XXX/XX brd 255.255.255.255 scope global wan inet6 fe80::250:43ff:fe00:e940/64 scope link valid_lft forever preferred_lft forever 20: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9216 qdisc pfifo_fast state UP qlen 1000 link/ether bc:ae:c5:b7:a1:0c brd ff:ff:ff:ff:ff:ff inet6 fe80::beae:c5ff:feb7:a10c/64 scope link valid_lft forever preferred_lft forever 21: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9216 qdisc pfifo_fast state UNKNOWN qlen 100 link/ether 86:5c:8f:50:85:c0 brd ff:ff:ff:ff:ff:ff inet6 fe80::845c:8fff:fe50:85c0/64 scope link valid_lft forever preferred_lft forever 22: lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9216 qdisc noqueue state UNKNOWN link/ether 86:5c:8f:50:85:c0 brd ff:ff:ff:ff:ff:ff inet 10.0.1.1/23 brd 10.0.1.255 scope global lan inet6 fe80::845c:8fff:fe50:85c0/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo:155366820 1023681 0 0 0 0 0 0 155366820 1023681 0 0 0 0 0 0 venet0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 wan:1454507933 27839849 1 0 0 1 0 0 3230090264 21115124 0 0 0 0 0 0 eth0:2321947264 172159593 0 0 0 0 0 0 1273348730 99747618 0 0 0 0 0 0 tap0: 767770 6791 0 0 0 0 0 0 48792883 390743 0 76 0 0 0 0 lan:4182803853 172165556 0 0 0 0 0 324453 1281164933 99754649 0 0 0 0 0 0 *** Protocol statistics: Ip: 197004352 total packets received 8 with invalid addresses 257676 forwarded 0 incoming packets discarded 196598619 incoming packets delivered 119631641 requests sent out 26 outgoing packets dropped 2964 dropped because of missing route 16 fragments dropped after timeout 1007 reassemblies required 431 packets reassembled ok 16 packet reassembles failed Icmp: 39414 ICMP messages received 3068 input ICMP message failed. ICMP input histogram: destination unreachable: 35666 timeout in transit: 2669 source quenches: 75 redirects: 620 echo requests: 384 43748 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 43348 echo request: 16 echo replies: 384 IcmpMsg: InType3: 35666 InType4: 75 InType5: 620 InType8: 384 InType11: 2669 OutType0: 384 OutType3: 43348 OutType8: 16 Tcp: 879380 active connections openings 656846 passive connection openings 602766 failed connection attempts 38241 connection resets received 71 connections established 194134194 segments received 114917522 segments send out 2675998 segments retransmited 61 bad segments received. 161576 resets sent Udp: 2534718 packets received 26941 packets to unknown port received. 121087 packet receive errors 1754606 packets sent RcvbufErrors: 121069 UdpLite: TcpExt: 4356 resets received for embryonic SYN_RECV sockets 294 packets pruned from receive queue because of socket buffer overrun 30 ICMP packets dropped because they were out-of-window 554030 TCP sockets finished time wait in fast timer 4 time wait sockets recycled by time stamp 1415 packets rejects in established connections because of timestamp 413678 delayed acks sent 324 delayed acks further delayed because of locked socket Quick ack mode was activated 105428 times 185 times the listen queue of a socket overflowed 185 SYNs to LISTEN sockets dropped 2848771 packets directly queued to recvmsg prequeue. 151344010 bytes directly in process context from backlog 2445267246 bytes directly received in process context from prequeue 156711915 packet headers predicted 4108661 packets header predicted and directly queued to user 18736233 acknowledgments not containing data payload received 8243320 predicted acknowledgments 1552 times recovered from packet loss due to fast retransmit 305164 times recovered from packet loss by selective acknowledgements 15 bad SACK blocks received Detected reordering 316 times using FACK Detected reordering 63268 times using SACK Detected reordering 6 times using reno fast retransmit Detected reordering 3778 times using time stamp 2433 congestion windows fully recovered without slow start 34381 congestion windows partially recovered using Hoe heuristic 6724 congestion windows recovered without slow start by DSACK 49821 congestion windows recovered without slow start after partial ack 290793 TCP data loss events TCPLostRetransmit: 13286 309 timeouts after reno fast retransmit 91233 timeouts after SACK recovery 58838 timeouts in loss state 700882 fast retransmits 27997 forward retransmits 427088 retransmits in slow start 664303 other TCP timeouts 564 classic Reno fast retransmits failed 54635 SACK retransmits failed 13738 packets collapsed in receive queue due to low socket buffer 120890 DSACKs sent for old packets 117 DSACKs sent for out of order packets 224822 DSACKs received 8691 DSACKs for out of order packets received 36024 connections reset due to unexpected data 752 connections reset due to early user close 474284 connections aborted due to timeout TCPSACKDiscard: 199 TCPDSACKIgnoredOld: 143226 TCPDSACKIgnoredNoUndo: 62087 TCPSpuriousRTOs: 3595 TCPSackShifted: 1005033 TCPSackMerged: 1751026 TCPSackShiftFallback: 906922 IpExt: InNoRoutes: 157 InBcastPkts: 153217 OutBcastPkts: 1172 InOctets: 2030554267 OutOctets: -1132832647 InBcastOctets: 20621566 OutBcastOctets: 279260 ** PCI devices: 00:00.0 Host bridge [0600]: ATI Technologies Inc RD780 Northbridge only dual slot PCI-e_GFX and HT1 K8 part [1002:5958] Subsystem: ASUSTeK Computer Inc. Device [1043:82ba] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fbb00000-fbbfffff Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:04.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port A) [1002:597a] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fbc00000-fbcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:06.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C) [1002:597c] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fbd00000-fbdfffff Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:07.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port D) [1002:597d] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fbe00000-fbefffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:09.0 PCI bridge [0604]: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port E) [1002:597e] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fbf00000-fbffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0]) Subsystem: ATI Technologies Inc SB700/SB800 SATA Controller [AHCI mode] [1002:4391] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 29 Region 0: I/O ports at 9000 [size=8] Region 1: I/O ports at 8000 [size=4] Region 2: I/O ports at 7000 [size=8] Region 3: I/O ports at 6000 [size=4] Region 4: I/O ports at 5000 [size=16] Region 5: Memory at fbaffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:834e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fbafd000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:834e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at fbafe000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:834e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at fbaff800 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:834e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fbafb000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:834e] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fbafc000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:834e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fbaff400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3c) Subsystem: ASUSTeK Computer Inc. Device [1043:834e] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP]) Subsystem: ASUSTeK Computer Inc. Device [1043:834e] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at ff00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_atiixp 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel HDA) [1002:4383] Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:836c] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin ? routed to IRQ 16 Region 0: Memory at fbaf4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d] Subsystem: ASUSTeK Computer Inc. Device [1043:834e] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=06, subordinate=06, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:834e] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbafa000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration [1022:1200] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Address Map [1022:1201] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller [1022:1202] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control [1022:1203] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Family 10h Processor Link Control [1022:1204] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M92 LP [Mobility Radeon HD 4300 Series] [1002:9552] (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device [1458:21ac] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at fbbe0000 (64-bit, non-prefetchable) [size=64K] Region 4: I/O ports at a000 [size=256] Expansion ROM at fbbc0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: radeon 01:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38] Subsystem: Giga-byte Technology Device [1458:aa38] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 19 Region 0: Memory at fbbfc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel 02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] (rev 20) Subsystem: Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 30 Region 0: Memory at fbcfc000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at b800 [size=256] Expansion ROM at fbcc0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: sky2 03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03) Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:83a3] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 31 Region 0: I/O ports at c800 [size=256] Region 2: Memory at fafff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at faff8000 (64-bit, prefetchable) [size=16K] Expansion ROM at fbdf0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: r8168 04:00.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6315 Series Firewire Controller [1106:3403] (rev 01) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8384] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fbeff800 (64-bit, non-prefetchable) [size=2K] Region 2: I/O ports at d800 [size=256] Capabilities: <access denied> Kernel driver in use: firewire_ohci 05:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121 SATA II Controller [11ab:6121] (rev b2) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:822f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at ec00 [size=8] Region 1: I/O ports at e880 [size=4] Region 2: I/O ports at e800 [size=8] Region 3: I/O ports at e480 [size=4] Region 4: I/O ports at e400 [size=16] Region 5: Memory at fbfffc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: pata_marvell ** USB devices: Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 007: ID 04fc:05d8 Sunplus Technology Co., Ltd Wireless keyboard/mouse Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 010: ID 0409:0059 NEC Corp. HighSpeed Hub Bus 003 Device 003: ID 0764:0501 Cyber Power System, Inc. CP1500 AVR UPS Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.3 APT prefers stable APT policy: (700, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-5-openvz-686 (SMP w/6 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-2.6.32-5-openvz-686 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs ii linux-base 2.6.32-38 Linux image base package ii module-init-tools 3.12-1 tools for managing Linux kernel mo ii vzctl 3.0.24-12 server virtualization solution - c Versions of packages linux-image-2.6.32-5-openvz-686 recommends: ii firmware-linux-free 2.6.32-38 Binary firmware for various driver ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib Versions of packages linux-image-2.6.32-5-openvz-686 suggests: pn grub | lilo <none> (no description available) pn linux-doc-2.6.32 <none> (no description available) Versions of packages linux-image-2.6.32-5-openvz-686 is related to: pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-linux <none> (no description available) pn firmware-linux-nonfree <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-2.6.32-5-openvz-686/postinst/ignoring-do-bootloader-2.6.32-5-openvz-686: linux-image-2.6.32-5-openvz-686/postinst/missing-firmware-2.6.32-5-openvz-686: linux-image-2.6.32-5-openvz-686/postinst/depmod-error-initrd-2.6.32-5-openvz-686: false linux-image-2.6.32-5-openvz-686/prerm/removing-running-kernel-2.6.32-5-openvz-686: true -- debsums errors found: debsums: missing file /lib/modules/2.6.32-5-openvz-686/kernel/drivers/net/r8169.ko (from linux-image-2.6.32-5-openvz-686 package)
--- End Message ---
--- Begin Message ---On Sat, 2011-12-10 at 12:27 -0500, Aaron Opfer wrote: > Package: linux-2.6 > Version: 2.6.32-38 > Severity: normal > > When attempting to change the MTU of my eth0 interface, which is > running the sky2 driver, it exhibits the following behavior: No it's not. [...] > 19: wan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc htb state UP qlen > 1000 > link/ether 00:50:43:00:e9:40 brd ff:ff:ff:ff:ff:ff > inet XX.XX.XX.XXX/XX brd 255.255.255.255 scope global wan > inet6 fe80::250:43ff:fe00:e940/64 scope link > valid_lft forever preferred_lft forever The 'wan' interface's Ethernet address is assigned to Marvell, which makes the chips supported by the sky2 driver. > 20: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9216 qdisc pfifo_fast state > UP qlen 1000 > link/ether bc:ae:c5:b7:a1:0c brd ff:ff:ff:ff:ff:ff > inet6 fe80::beae:c5ff:feb7:a10c/64 scope link > valid_lft forever preferred_lft forever [...] The 'eth0' interface's Ethernet address is assigned to Asus and presumably corresponds to the other network device at PCI address 03:00.0, handled by the r8168 driver. That's not one of ours; talk to Realtek. (You can confirm the above with 'ethtool -i <name>'.) Ben. -- Ben Hutchings Teamwork is essential - it allows you to blame someone else.signature.asc
Description: This is a digitally signed message part
--- End Message ---