retitle 653179 rt2800pci: missing ethtool wol command (ability to enable/disable wake-on-wlan) severity 653179 wishlist tags 653179 + upstream quit
pol kh wrote: > $ lspci | grep Ralink > 04:00.0 Network controller: Ralink corp. RT5390 [802.11 b/g/n 1T1R G-band PCI > Express Single Chip] [...] > # ethtool -s wlan0 wol d > Cannot get current wake-on-lan settings: Operation not supported > not setting wol [...] > [ 10.535481] phy0 -> rt2800pci_mcu_status: Error - MCU request failed, no > response from hardware [...] > 04:00.0 Network controller [0280]: Ralink corp. RT5390 [802.11 b/g/n 1T1R > G-band PCI Express Single Chip] [1814:539f] > Subsystem: Hewlett-Packard Company Pavilion DM1Z-3000 PCIe wireless > card [103c:1637] [...] > Kernel driver in use: rt2800pci Thanks. I'm surprised that wake-on-wlan is enabled by default for you --- is that a BIOS setting? In any event, the rt2800pci driver does not know how to handle the wake-on-wlan bit, and that is a deficiency relative to the Windows driver. I'd recommend getting in touch with the upstream developers at us...@rt2x00.serialmonkey.com to work on implementing it. Please cc either me or this bug log when doing so so we can track it. They may ask you to read registers set by the Windows driver or to test patches. Once a patch has been accepted upstream, we can apply it. Hope that helps, Jonathan -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20111224204044.GG25883@elie.Belkin
