Your message dated Tue, 24 Apr 2012 14:04:52 +0100
with message-id <1335272692.4056.60.camel@deadeye>
and subject line Re: Bug#649304: linux-image-3.1.0-1-686-pae: 
<processor.nocst=1> needed for 686-pae kernels
has caused the Debian Bug report #649304,
regarding linux-image-2.6.39-2-686-pae: Kernel boots, but dmesg contains kernel 
bug trace
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact ow...@bugs.debian.org
immediately.)


-- 
649304: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=649304
Debian Bug Tracking System
Contact ow...@bugs.debian.org with problems
--- Begin Message ---
Package: linux-2.6
Version: 2.6.39-2
Severity: important
Tags: sid

Kernel would not boot first thing this morning (June 10) but yesterday it
seemed OK after aptitude upgrade. Now after another upgrade it boots, but there
is a bug trace in logs



-- Package-specific info:
** Version:
Linux version 2.6.39-2-686-pae (Debian 2.6.39-2) (b...@decadent.org.uk) (gcc 
version 4.4.6 (Debian 4.4.6-3) ) #1 SMP Wed Jun 8 11:33:14 UTC 2011

** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.39-2-686-pae 
root=UUID=e27e5d70-6d89-407c-a7c0-078ae4a0e704 ro quiet

** Tainted: D (128)
 * Kernel has oopsed before.

** Kernel log:
[    5.812855] *pdpt = 0000000001492001 *pde = 00000000019fc067 *pte = 
0000000000000000 
[    5.812990] Oops: 0000 [#1] SMP 
[    5.813087] last sysfs file: 
/sys/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/PNP0C04:00/uevent
[    5.813133] Modules linked in: video processor parport thermal_sys button 
ext3 jbd mbcache usb_storage uas sg sd_mod sr_mod cdrom crc_t10dif ata_generic 
uhci_hcd ata_piix libata ehci_hcd e100 usbcore scsi_mod mii [last unloaded: 
scsi_wait_scan]
[    5.813974] 
[    5.814010] Pid: 275, comm: modprobe Not tainted 2.6.39-2-686-pae #1         
         /D865GBF                        
[    5.814149] EIP: 0000:[<000000c3>] EFLAGS: f7280b04 CPU: 0
[    5.814188] EIP is at 0xc3
[    5.814234] EAX: c10f47dc EBX: f716bd3c ECX: 00000000 EDX: f5c29774
[    5.814285] ESI: 33380000 EDI: 00000002 EBP: 00000002 ESP: f716bd34
[    5.814335]  DS: ab94 ES: 0af8 FS: 0001 GS: 00e0 SS: 0068
[    5.814386] Process modprobe (pid: 275, ti=f716a000 task=f7055a00 
task.ti=f70dc000)
[    5.814447] Stack:
[    5.814492]  c1413a68 c1413a64 00000282 00000000 f7004780 c102dfbb 00000000 
00000000
[    5.814793]  00000001 00000003 f7048000 00000000 00000282 f7048000 00000000 
c122c8ee
[    5.815093]  00000000 f5c29774 00000001 c115430c 00000000 f716bdcc 00000000 
f5c29774
[    5.815394] Call Trace:
[    5.815448]  [<c102dfbb>] ? __wake_up+0x2c/0x3b
[    5.815503]  [<c122c8ee>] ? netlink_broadcast_filtered+0x22b/0x254
[    5.815558]  [<c115430c>] ? idr_get_empty_slot+0x149/0x217
[    5.815610]  [<c115430c>] ? idr_get_empty_slot+0x149/0x217
[    5.815663]  [<c11586d1>] ? number+0x176/0x279
[    5.815713]  [<c11544ab>] ? ida_get_new_above+0xd1/0x16c
[    5.815767]  [<c101aacb>] ? native_send_call_func_single_ipi+0x1f/0x20
[    5.815821]  [<c105c446>] ? generic_exec_single+0x4d/0x65
[    5.815874]  [<c1026817>] ? leave_mm+0x29/0x29
[    5.815925]  [<c105c5d0>] ? smp_call_function_single+0xd1/0xe2
[    5.815977]  [<c1026817>] ? leave_mm+0x29/0x29
[    5.816019]  [<c1026817>] ? leave_mm+0x29/0x29
[    5.816019]  [<c105c806>] ? smp_call_function+0x17/0x1b
[    5.816019]  [<c105c817>] ? on_each_cpu+0xd/0x30
[    5.816019]  [<c10b62ab>] ? __purge_vmap_area_lazy+0xf6/0x13c
[    5.816019]  [<c10b730b>] ? vm_unmap_aliases+0x121/0x12a
[    5.816019]  [<f8219000>] ? 0xf8218fff
[    5.816019]  [<c10241a4>] ? change_page_attr_set_clr+0xfc/0x338
[    5.816019]  [<c1050447>] ? down_timeout+0x36/0x3d
[    5.816019]  [<c12b122a>] ? mutex_lock+0xb/0x24
[    5.816019]  [<c12b122a>] ? mutex_lock+0xb/0x24
[    5.816019]  [<c12b50c7>] ? kprobes_module_callback+0xf5/0x109
[    5.816019]  [<c11ac989>] ? acpi_ut_release_read_lock+0x40/0x45
[    5.816019]  [<c1051815>] ? lowest_in_progress+0x5d/0x66
[    5.816019]  [<c10245f0>] ? change_page_attr_set+0x22/0x26
[    5.816019]  [<c1024607>] ? set_memory_rw+0x13/0x17
[    5.816019]  [<f8219000>] ? 0xf8218fff
[    5.816019]  [<c1060cbd>] ? sys_init_module+0xdca/0xe7d
[    5.816019]  [<c12b715f>] ? sysenter_do_call+0x12/0x28
[    5.816019] Code:  Bad EIP value.
[    5.816019] EIP: [<0000099c>] 0x99c SS:ESP 0068:f716bd34
[    5.816019] CR2: 00000000ffffff82
[    5.816019] ---[ end trace 935545f4eeaa95f8 ]---
[    5.858310] input: PC Speaker as /devices/platform/pcspkr/input/input3
[    5.865901] parport_pc 00:08: reported by Plug and Play ACPI
[    5.866024] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    6.003864] Intel 82802 RNG detected
[    6.081093] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    6.143776] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    6.145569] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 
17
[    6.185053] [drm] Initialized drm 1.1.0 20060810
[    6.362132] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 
17
[    6.362281] Intel ICH 0000:00:1f.5: setting latency timer to 64
[    6.788072] intel8x0_measure_ac97_clock: measured 55917 usecs (2694 samples)
[    6.788128] intel8x0: clocking to 48000
[    6.789405] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    6.789477] i915 0000:00:02.0: setting latency timer to 64
[    6.808770] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    6.808859] [drm] Driver supports precise vblank timestamp query.
[    6.822560] vgaarb: device changed decodes: 
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    6.823052] [drm] initialized overlay support
[    6.954439] fbcon: inteldrmfb (fb0) is primary device
[    7.025798] Console: switching to colour frame buffer device 210x65
[    7.033765] fb0: inteldrmfb frame buffer device
[    7.033807] drm: registered panic notifier
[    7.034224] input: ImPS/2 Generic Wheel Mouse as 
/devices/platform/i8042/serio1/input/input4
[    7.034742] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    9.185282] Adding 196996k swap on /dev/sda1.  Priority:-1 extents:1 
across:196996k 
[    9.755009] EXT3-fs (sda2): using internal journal
[    9.899473] loop: module loaded
[   11.372843] EXT3-fs: barriers not enabled
[   11.373177] kjournald starting.  Commit interval 5 seconds
[   11.373493] EXT3-fs (sda3): using internal journal
[   11.373545] EXT3-fs (sda3): mounted filesystem with ordered data mode
[   11.528611] FAT: utf8 is not a recommended IO charset for FAT filesystems, 
filesystem will be case sensitive!
[   11.574945] EXT3-fs: barriers not enabled
[   11.584795] kjournald starting.  Commit interval 5 seconds
[   11.585250] EXT3-fs (sda5): using internal journal
[   11.585295] EXT3-fs (sda5): mounted filesystem with ordered data mode
[   12.412198] RPC: Registered udp transport module.
[   12.415692] RPC: Registered tcp transport module.
[   12.419074] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   12.479070] FS-Cache: Loaded
[   12.539800] FS-Cache: Netfs 'nfs' registered for caching
[   12.567740] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[   12.913143] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   12.916654] e100 0000:01:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex
[   12.920365] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   13.472995] fuse init (API version 7.16)
[   13.705376] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x2e
[   13.770117] microcode: CPU1 sig=0xf29, pf=0x4, revision=0x2e
[   13.784932] microcode: Microcode Update Driver: v2.00 
<tig...@aivazian.fsnet.co.uk>, Peter Oruba
[   23.104065] eth0: no IPv6 routers present

** Model information
not available

** Loaded modules:
Module                  Size  Used by
microcode              13231  0 
fuse                   55666  1 
nfsd                  196206  2 
nfs                   219235  0 
lockd                  60891  2 nfsd,nfs
fscache                31438  1 nfs
auth_rpcgss            31819  2 nfsd,nfs
nfs_acl                12463  2 nfsd,nfs
sunrpc                137017  6 nfsd,nfs,lockd,auth_rpcgss,nfs_acl
nls_utf8               12416  1 
nls_cp437              12417  1 
vfat                   16989  1 
fat                    44149  1 vfat
lm85                   17907  0 
hwmon_vid              12364  1 lm85
loop                   17777  0 
i915                  286502  2 
snd_intel8x0           22287  0 
snd_ac97_codec         83732  1 snd_intel8x0
ac97_bus               12462  1 snd_ac97_codec
drm_kms_helper         26550  1 i915
snd_pcm                52731  2 snd_intel8x0,snd_ac97_codec
snd_seq                39172  0 
snd_timer              22171  2 snd_pcm,snd_seq
snd_seq_device         12995  1 snd_seq
psmouse                45863  0 
snd                    38189  6 
snd_intel8x0,snd_ac97_codec,snd_pcm,snd_seq,snd_timer,snd_seq_device
drm                   129190  3 i915,drm_kms_helper
shpchp                 26653  0 
i2c_i801               12670  0 
i2c_algo_bit           12706  1 i915
soundcore              12878  1 snd
snd_page_alloc         12841  2 snd_intel8x0,snd_pcm
pci_hotplug            26303  1 shpchp
evdev                  13084  7 
i2c_core               19022  6 
lm85,i915,drm_kms_helper,drm,i2c_i801,i2c_algo_bit
intel_rng              12501  0 
rng_core               12550  1 intel_rng
parport_pc             21895  0 
pcspkr                 12515  0 
serio_raw              12758  0 
video                  17345  1 i915
processor              26983  0 
parport                27018  1 parport_pc
thermal_sys            17667  3 video,processor,processor
button                 12783  1 i915
ext3                  102125  3 
jbd                    40818  1 ext3
mbcache                12810  1 ext3
usb_storage            34951  1 
uas                    12975  0 
sg                     21385  0 
sd_mod                 35060  7 
sr_mod                 17418  0 
cdrom                  34631  1 sr_mod
crc_t10dif             12332  1 sd_mod
ata_generic            12439  0 
uhci_hcd               21850  0 
ata_piix               21079  4 
libata                132100  2 ata_generic,ata_piix
ehci_hcd               34885  0 
e100                   31318  0 
usbcore                99225  5 usb_storage,uas,uhci_hcd,ehci_hcd
scsi_mod              134453  6 usb_storage,uas,sg,sr_mod,sd_mod,libata
mii                    12595  1 e100

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP 
qlen 1000
    link/ether 00:0c:f1:90:91:ef brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.105/24 brd 192.168.0.255 scope global eth0
    inet6 fe80::20c:f1ff:fe90:91ef/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    
packets errs drop fifo colls carrier compressed
    lo:     708      13    0    0    0     0          0         0      708      
13    0    0    0     0       0          0
  eth0:   87951     139    0    0    0     0          0         0    18430     
175    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    156 total packets received
    0 forwarded
    0 incoming packets discarded
    155 incoming packets delivered
    153 requests sent out
Icmp:
    0 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
    0 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
Tcp:
    7 active connections openings
    2 passive connection openings
    0 failed connection attempts
    0 connection resets received
    0 connections established
    84 segments received
    85 segments send out
    0 segments retransmited
    0 bad segments received.
    0 resets sent
Udp:
    66 packets received
    0 packets to unknown port received.
    0 packet receive errors
    64 packets sent
UdpLite:
TcpExt:
    3 TCP sockets finished time wait in fast timer
    1 delayed acks sent
    43 packet headers predicted
    15 acknowledgments not containing data payload received
IpExt:
    InMcastPkts: 21
    OutMcastPkts: 21
    InBcastPkts: 3
    InOctets: 89314
    OutOctets: 12108
    InMcastOctets: 3347
    OutMcastOctets: 3371
    InBcastOctets: 891

*** Device features:
eth0: 0x4000
lo: 0x201b7c65

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM 
Controller/Host-Hub Interface [8086:2570] (rev 02)
        Subsystem: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub 
Interface [8086:2570]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: <access denied>
        Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated 
Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller])
        Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx+
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
        Region 1: Memory at ffa80000 (32-bit, non-prefetchable) [size=512K]
        Region 2: I/O ports at ec00 [size=8]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to 
I/O Memory Interface [8086:2576] (rev 02)
        Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Region 0: Memory at fecf0000 (32-bit, non-prefetchable) [size=4K]

00:1d.0 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at c800 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at cc00 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at d000 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB 
UHCI Controller #4 [8086:24de] (rev 02) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at d400 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 
EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
        Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 23
        Region 0: Memory at ffa7fc00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
c2) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: ff800000-ff8fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC 
Interface Bridge [8086:24d0] (rev 02)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE 
Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
        Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx+
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at ffa0 [size=16]
        Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]
        Kernel driver in use: ata_piix

00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller 
[8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
        Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at e800 [size=8]
        Region 1: I/O ports at e400 [size=4]
        Region 2: I/O ports at e000 [size=8]
        Region 3: I/O ports at dc00 [size=4]
        Region 4: I/O ports at d800 [size=16]
        Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus 
Controller [8086:24d3] (rev 02)
        Subsystem: Intel Corporation Desktop Board D865GBF [8086:4246]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at c400 [size=32]
        Kernel driver in use: i801_smbus

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER 
(ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
        Subsystem: Intel Corporation Desktop Board D865GBF [8086:e001]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 2: Memory at ffa7f800 (32-bit, non-prefetchable) [size=512]
        Region 3: Memory at ffa7f400 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>
        Kernel driver in use: Intel ICH

01:08.0 Ethernet controller [0200]: Intel Corporation 82562EZ 10/100 Ethernet 
Controller [8086:1050] (rev 01)
        Subsystem: Intel Corporation Desktop Board D865GBF [8086:302f]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at ff8ff000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at bc00 [size=64]
        Capabilities: <access denied>
        Kernel driver in use: e100


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 102 Flash 
Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
Bus 003 Device 002: ID 04a9:220d Canon, Inc. CanoScan N670U/N676U/LiDE 20


-- System Information:
Debian Release: wheezy/sid
  APT prefers unstable
  APT policy: (990, 'unstable')
Architecture: i386 (i686)

Kernel: Linux 2.6.39-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_CA.UTF-8, LC_CTYPE=en_CA.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.39-2-686-pae depends on:
ii  debconf [debconf-2.0]         1.5.39     Debian configuration management sy
ii  initramfs-tools [linux-initra 0.99       tools for generating an initramfs
ii  linux-base                    3.2        Linux image base package
ii  module-init-tools             3.16-1     tools for managing Linux kernel mo

Versions of packages linux-image-2.6.39-2-686-pae recommends:
ii  firmware-linux-free           3          Binary firmware for various driver
ii  libc6-i686                    2.13-6     Embedded GNU C Library: Shared lib

Versions of packages linux-image-2.6.39-2-686-pae suggests:
ii  grub-pc                       1.99-6     GRand Unified Bootloader, version 
pn  linux-doc-2.6.39              <none>     (no description available)

Versions of packages linux-image-2.6.39-2-686-pae is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
ii  firmware-linux                0.30       Binary firmware for various driver
ii  firmware-linux-nonfree        0.30       Binary firmware for various driver
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.39-2-686-pae/postinst/depmod-error-initrd-2.6.39-2-686-pae: 
false
  linux-image-2.6.39-2-686-pae/prerm/removing-running-kernel-2.6.39-2-686-pae: 
true
  linux-image-2.6.39-2-686-pae/postinst/ignoring-ramdisk:
  linux-image-2.6.39-2-686-pae/postinst/missing-firmware-2.6.39-2-686-pae:



--- End Message ---
--- Begin Message ---
Version: 3.2.15-1

On Tue, 2012-04-24 at 05:53 -0700, Will Set wrote:
> 
> 3.2.15  fixed  for me.
> 

Right, the fix was committed as:

commit 3e80acd1af40fcd91a200b0416a7616b20c5d647
Author: Julian Anastasov <j...@ssi.bg>
Date:   Thu Feb 23 22:40:43 2012 +0200

    ACPICA: Fix regression in FADT revision checks

which was cherry-picked into 3.2.15.

Ben.

-- 
Ben Hutchings
For every action, there is an equal and opposite criticism. - Harrison

Attachment: signature.asc
Description: This is a digitally signed message part


--- End Message ---

Reply via email to