Package: linux-2.6 Version: 3.2.15-1~bpo60+1 Severity: important Hi,
It seems stable update 3.2.14 or 3.2.15 introduced a regression regarding NFS4 delegations. It seems to be the same issue as reported here[1] against the 3.3 kernel. It was also intruduced there between 3.3.0 and 3.3.1. [1] https://bugzilla.redhat.com/show_bug.cgi?id=811138 The following BUG is triggered when logging into gnome, but seems to be easily reproduceable by using flock (see Fedora bug report). Apr 25 14:06:02 bach gdm-simple-greeter[2320]: WARNING: Failed to send buffer Apr 25 14:06:05 bach kernel: [ 78.797185] BUG: unable to handle kernel paging request at ffffffffffffffb8 Apr 25 14:06:05 bach kernel: [ 78.797233] IP: [<ffffffffa048f016>] nfs_mark_delegation_referenced+0x6/0x6 [nfs] Apr 25 14:06:05 bach kernel: [ 78.797289] PGD 1607067 PUD 1608067 PMD 0 Apr 25 14:06:05 bach kernel: [ 78.797319] Oops: 0000 [#1] SMP Apr 25 14:06:05 bach kernel: [ 78.797344] CPU 3 Apr 25 14:06:05 bach kernel: [ 78.797357] Modules linked in: autofs4 acpi_cpufreq mperf cpufreq_stats cpufreq_userspace cpufreq_powersave cpufreq_conservative ip6_tables ppdev lp bridge stp bnep rfcomm bluetooth rfkill tun binfmt_misc uinput kvm_intel kvm fuse nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables ext3 jbd loop snd_hda_codec_analog ses enclosure snd_hda_intel snd_hda_codec snd_hwdep i915 snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device joydev snd drm_kms_helper usbhid usb_storage hid evdev dell_wmi soundcore parport_pc i2c_i801 drm i2c_algo_bit i2c_core processor uas button video snd_page_alloc pcspkr sparse_keymap parport tpm_tis tpm tpm_bios wmi dcdbas psmouse serio_raw thermal_sys ext4 mbcache jbd2 crc16 dm_mod sg sr_mod sd_mod cdrom crc_t10dif uhci_hcd ahci libahci ata_generic ehci_hcd lib ata e1000e usbcore scsi_mod usb_com Apr 25 14:06:05 bach kernel: mon [last unloaded: scsi_wait_scan] Apr 25 14:06:05 bach kernel: [ 78.798038] Apr 25 14:06:05 bach kernel: [ 78.798050] Pid: 3095, comm: gnome-keyring-d Not tainted 3.2.0-0.bpo.2-amd64 #1 Dell Inc. OptiPlex 760 /0M858N Apr 25 14:06:05 bach kernel: [ 78.798114] RIP: 0010:[<ffffffffa048f016>] [<ffffffffa048f016>] nfs_mark_delegation_referenced+0x6/0x6 [nfs] Apr 25 14:06:05 bach kernel: [ 78.798177] RSP: 0018:ffff88021eca9e40 EFLAGS: 00010246 Apr 25 14:06:05 bach kernel: [ 78.798206] RAX: ffff88021eca5000 RBX: 00000000ffffd8ca RCX: 00000000ffffd8ca Apr 25 14:06:05 bach kernel: [ 78.798244] RDX: ffff88021eca9eb8 RSI: 0000000000000001 RDI: 0000000000000000 Apr 25 14:06:05 bach kernel: [ 78.798281] RBP: ffff88021eca9eb8 R08: 00000000ffffd8ca R09: ffffffffa0499a60 Apr 25 14:06:05 bach kernel: [ 78.798318] R10: 00000000ffffffff R11: ffff88022e7c8b00 R12: ffff88022ddfb000 Apr 25 14:06:05 bach kernel: [ 78.798356] R13: ffff88022da7fc00 R14: ffff88022e7c8b00 R15: 0000000000000000 Apr 25 14:06:05 bach kernel: [ 78.798394] FS: 00007f09050907a0(0000) GS:ffff880237cc0000(0000) knlGS:0000000000000000 Apr 25 14:06:05 bach kernel: [ 78.798436] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 Apr 25 14:06:05 bach kernel: [ 78.798467] CR2: ffffffffffffffb8 CR3: 000000021eda7000 CR4: 00000000000406e0 Apr 25 14:06:05 bach kernel: [ 78.798504] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 Apr 25 14:06:05 bach kernel: [ 78.798541] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Apr 25 14:06:05 bach kernel: [ 78.798579] Process gnome-keyring-d (pid: 3095, threadinfo ffff88021eca8000, task ffff88021ec841c0) Apr 25 14:06:05 bach kernel: [ 78.798625] Stack: Apr 25 14:06:05 bach kernel: [ 78.798637] ffffffffa047d657 ffff88022e7c8b00 ffff88022da93600 ffff88022e7c8b00 Apr 25 14:06:05 bach kernel: [ 78.798685] 00000000000000fa 0000000000000006 0000000000000002 ffff88022e7c8b40 Apr 25 14:06:05 bach kernel: [ 78.798732] ffffffffa04813f2 ffff88022ddfb048 ffff88021eca9eb8 0000000000000000 Apr 25 14:06:05 bach kernel: [ 78.798779] Call Trace: Apr 25 14:06:05 bach kernel: [ 78.798804] [<ffffffffa047d657>] ? nfs4_handle_exception+0x149/0x2b8 [nfs] Apr 25 14:06:05 bach kernel: [ 78.798851] [<ffffffffa04813f2>] ? nfs4_proc_lock+0x2d9/0x348 [nfs] Apr 25 14:06:05 bach kernel: [ 78.798892] [<ffffffffa046a48f>] ? do_setlk+0x59/0xcc [nfs] Apr 25 14:06:05 bach kernel: [ 78.798926] [<ffffffff8113c83b>] ? sys_flock+0x10c/0x137 Apr 25 14:06:05 bach kernel: [ 78.798958] [<ffffffff81369812>] ? system_call_fastpath+0x16/0x1b Apr 25 14:06:05 bach kernel: [ 78.798991] Code: 5d 41 5c 41 5d 48 c7 c6 d0 ad 49 a0 48 c7 c7 19 07 4a a0 31 c0 e9 33 35 ed e0 59 5b 5d 41 5c 41 5d c3 90 90 90 f0 80 4f 48 04 c3 <48> 8b 47 b8 48 85 c0 74 17 8b 50 30 83 e6 03 21 f2 39 f2 75 0b Apr 25 14:06:05 bach kernel: [ 78.799224] RIP [<ffffffffa048f016>] nfs_mark_delegation_referenced+0x6/0x6 [nfs] Apr 25 14:06:05 bach kernel: [ 78.799277] RSP <ffff88021eca9e40> Apr 25 14:06:05 bach kernel: [ 78.799296] CR2: ffffffffffffffb8 Apr 25 14:06:05 bach kernel: [ 78.956179] ---[ end trace 1d25b2c6a9c9d283 ]--- The kernel log below was taken with the 3.2.12 kernel that doesn't have this problem. This also affects the sid 3.2.15 kernel (this machines is running the bpo kernel). The bug seems to be identical to Debian bug 669270, but was marked as found in 3.2.7 there. Since I can not reproduce it with 3.2.12 I'm not sure the source of the problem is the same, so I've filed a new bug. Regards, Rik -- Package-specific info: ** Version: Linux version 3.2.0-0.bpo.2-amd64 (Debian 3.2.12-1~bpo60+1) (debian-kernel@lists.debian.org) (gcc version 4.4.5 (Debian 4.4.5-8) ) #1 SMP Sun Mar 25 10:33:35 UTC 2012 ** Command line: BOOT_IMAGE=/vmlinuz-3.2.0-0.bpo.2-amd64 root=/dev/mapper/vg_bach-root ro ipv6.disable=1 quiet ** Not tainted ** Kernel log: [ 5.420087] usb 1-4.4: new low-speed USB device number 4 using ehci_hcd [ 5.517460] usb 1-4.4: New USB device found, idVendor=046d, idProduct=c063 [ 5.517463] usb 1-4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.517466] usb 1-4.4: Product: DELL USB Laser Mouse [ 5.517468] usb 1-4.4: Manufacturer: DELL [ 5.604205] usb 1-4.3.1: new low-speed USB device number 5 using ehci_hcd [ 5.702208] usb 1-4.3.1: New USB device found, idVendor=413c, idProduct=2011 [ 5.702212] usb 1-4.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.702214] usb 1-4.3.1: Product: Dell Multimedia Pro Keyboard [ 5.702216] usb 1-4.3.1: Manufacturer: Dell [ 6.166300] scsi 8:0:0:0: Direct-Access TEAC USB HS-CF Card 4.12 PQ: 0 ANSI: 0 [ 6.169919] scsi 8:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.12 PQ: 0 ANSI: 0 [ 6.173552] scsi 8:0:0:2: Direct-Access TEAC USB HS-MS Card 4.12 PQ: 0 ANSI: 0 [ 6.176668] scsi 8:0:0:3: Direct-Access TEAC USB HS-SD Card 4.12 PQ: 0 ANSI: 0 [ 6.177143] sd 8:0:0:0: Attached scsi generic sg3 type 0 [ 6.177315] sd 8:0:0:1: Attached scsi generic sg4 type 0 [ 6.177476] sd 8:0:0:2: Attached scsi generic sg5 type 0 [ 6.177637] sd 8:0:0:3: Attached scsi generic sg6 type 0 [ 6.198537] sd 8:0:0:0: [sdc] Attached SCSI removable disk [ 6.219034] sd 8:0:0:1: [sdd] Attached SCSI removable disk [ 6.223785] sd 8:0:0:2: [sde] Attached SCSI removable disk [ 6.227785] sd 8:0:0:3: [sdf] Attached SCSI removable disk [ 7.141114] udev[344]: starting version 164 [ 7.713588] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 7.733692] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 7.733697] ACPI: Power Button [VBTN] [ 7.736217] Monitor-Mwait will be used to enter C-1 state [ 7.738581] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 7.738584] ACPI: Power Button [PWRF] [ 7.773738] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 7.923814] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.4/1-4.4:1.0/input/input3 [ 7.923912] generic-usb 0003:046D:C063.0001: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:1a.7-4.4/input0 [ 7.926554] input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/1-4.3.1/1-4.3.1:1.0/input/input4 [ 7.926627] generic-usb 0003:413C:2011.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1a.7-4.3.1/input0 [ 7.932404] input: Dell Dell Multimedia Pro Keyboard as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/1-4.3.1/1-4.3.1:1.1/input/input5 [ 7.932466] generic-usb 0003:413C:2011.0003: input,hidraw2: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1a.7-4.3.1/input1 [ 7.932487] usbcore: registered new interface driver usbhid [ 7.932489] usbhid: USB HID core driver [ 7.934282] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 7.983231] [drm] Initialized drm 1.1.0 20060810 [ 8.056888] parport_pc 00:06: reported by Plug and Play ACPI [ 8.056938] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] [ 8.146605] wmi: Mapper loaded [ 8.322749] input: Dell WMI hotkeys as /devices/virtual/input/input6 [ 8.764988] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 8.764992] i915 0000:00:02.0: setting latency timer to 64 [ 8.796059] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 8.796066] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 8.796067] [drm] Driver supports precise vblank timestamp query. [ 8.796101] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 9.145750] fbcon: inteldrmfb (fb0) is primary device [ 9.319768] Console: switching to colour frame buffer device 160x64 [ 9.322496] fb0: inteldrmfb frame buffer device [ 9.322497] drm: registered panic notifier [ 9.322566] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 9.322613] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 9.322671] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 9.322694] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 9.762283] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7 [ 10.501489] EXT4-fs (dm-0): re-mounted. Opts: (null) [ 10.620615] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro [ 10.803206] loop: module loaded [ 11.207477] Adding 8388604k swap on /dev/mapper/vg_bach-swap. Priority:-1 extents:1 across:8388604k [ 11.720860] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 11.816764] kjournald starting. Commit interval 5 seconds [ 11.817155] EXT3-fs (dm-2): using internal journal [ 11.817159] EXT3-fs (dm-2): mounted filesystem with ordered data mode [ 12.602414] ip_tables: (C) 2000-2006 Netfilter Core Team [ 12.654524] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 13.024202] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 13.080048] e1000e 0000:00:19.0: irq 47 for MSI/MSI-X [ 14.640864] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None [ 14.640868] e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO [ 27.800849] RPC: Registered named UNIX socket transport module. [ 27.800851] RPC: Registered udp transport module. [ 27.800853] RPC: Registered tcp transport module. [ 27.800854] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 27.871830] FS-Cache: Loaded [ 28.008376] FS-Cache: Netfs 'nfs' registered for caching [ 28.019451] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 28.387557] fuse init (API version 7.17) [ 29.821071] tun: Universal TUN/TAP device driver, 1.6 [ 29.821073] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [ 30.385406] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input8 [ 34.428342] Bluetooth: Core ver 2.16 [ 34.428365] NET: Registered protocol family 31 [ 34.428366] Bluetooth: HCI device and connection manager initialized [ 34.428369] Bluetooth: HCI socket layer initialized [ 34.428370] Bluetooth: L2CAP socket layer initialized [ 34.428464] Bluetooth: SCO socket layer initialized [ 34.485352] Bluetooth: RFCOMM TTY layer initialized [ 34.485356] Bluetooth: RFCOMM socket layer initialized [ 34.485357] Bluetooth: RFCOMM ver 1.11 [ 34.535651] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 34.535654] Bluetooth: BNEP filters: protocol multicast [ 34.637333] Bridge firewalling registered [ 35.414988] lp0: using parport0 (interrupt-driven). [ 35.656143] ppdev: user-space parallel port driver [ 38.214044] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 42.186945] sshd (2242): /proc/2242/oom_adj is deprecated, please use /proc/2242/oom_score_adj instead. ** Model information sys_vendor: Dell Inc. product_name: OptiPlex 760 product_version: chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: A13 board_vendor: Dell Inc. board_name: 0M858N board_version: A00 ** Loaded modules: autofs4 acpi_cpufreq mperf cpufreq_stats cpufreq_userspace cpufreq_powersave cpufreq_conservative ip6_tables ppdev lp bridge stp bnep rfcomm bluetooth rfkill tun binfmt_misc kvm_intel kvm uinput fuse nfsd nfs lockd fscache auth_rpcgss nfs_acl sunrpc ipt_REJECT xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables ext3 jbd loop snd_hda_codec_analog snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_seq_midi i915 snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device dell_wmi sparse_keymap snd wmi drm_kms_helper soundcore parport_pc snd_page_alloc drm evdev joydev parport psmouse i2c_i801 usbhid serio_raw hid i2c_algo_bit i2c_core video pcspkr button processor dcdbas thermal_sys tpm_tis tpm tpm_bios ext4 mbcache jbd2 crc16 usb_storage uas dm_mod sg sr_mod cdrom sd_mod crc_t10dif uhci_hcd ahci libahci ata_generic libata ehci_hcd scsi_mod usbcore e1000e usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e10] (rev 03) Subsystem: Dell Device [1028:027f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e12] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 49 Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at ecb0 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation 4 Series Chipset Integrated Graphics Controller [8086:2e13] (rev 03) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f7b00000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset HECI Controller [8086:2e14] (rev 03) Subsystem: Dell Device [1028:027f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at feda6000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:03.2 IDE interface [0101]: Intel Corporation 4 Series Chipset PT IDER Controller [8086:2e16] (rev 03) (prog-if 85 [Master SecO PriO]) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: I/O ports at fe80 [size=8] Region 1: I/O ports at fe90 [size=4] Region 2: I/O ports at fea0 [size=8] Region 3: I/O ports at feb0 [size=4] Region 4: I/O ports at fef0 [size=16] Capabilities: <access denied> Kernel driver in use: ata_generic 00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset Serial KT Controller [8086:2e17] (rev 03) (prog-if 02 [16550]) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at ecb8 [size=8] Region 1: Memory at f7ada000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network Connection [8086:10de] (rev 02) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 47 Region 0: Memory at f7ae0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f7adb000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at ece0 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff20 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at ff00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 4: I/O ports at fc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:027f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 22 Region 0: Memory at f7ad9c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller [8086:3a6e] (rev 02) Subsystem: Dell Device [1028:027f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 50 Region 0: Memory at f7adc000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 1 [8086:3a70] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f7900000-f79fffff Prefetchable memory behind bridge: 00000000fc200000-00000000fc3fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 82801JD/DO (ICH10 Family) PCI Express Port 2 [8086:3a72] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: f7800000-f78fffff Prefetchable memory behind bridge: 00000000fc000000-00000000fc1fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at ff80 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at ff60 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI]) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at ff40 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB Controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:027f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at ff980000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a2) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801JD (ICH10D) LPC Interface Controller [8086:3a1a] (rev 02) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family) SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 48 Region 0: I/O ports at fe00 [size=8] Region 1: I/O ports at fe10 [size=4] Region 2: I/O ports at fe20 [size=8] Region 3: I/O ports at fe30 [size=4] Region 4: I/O ports at fec0 [size=32] Region 5: Memory at ff970000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller [8086:3a60] (rev 02) Subsystem: Dell Device [1028:027f] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7ad9b00 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0940 [size=32] Kernel driver in use: i801_smbus ** USB devices: Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0644:0200 TEAC Corp. All-In-One Multi-Card Reader CA200/B/S Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 005: ID 413c:2011 Dell Computer Corp. Multimedia Pro Keyboard Bus 001 Device 004: ID 046d:c063 Logitech, Inc. DELL Laser Mouse Bus 001 Device 003: ID 413c:1005 Dell Computer Corp. Multimedia Pro Keyboard Hub Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 6.0.4 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-0.bpo.2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-0.bpo.2-amd64 depends on: ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs ii linux-base 3.4~bpo60+1 Linux image base package ii module-init-tools 3.12-2 tools for managing Linux kernel mo Versions of packages linux-image-3.2.0-0.bpo.2-amd64 recommends: ii firmware-linux-free 2.6.32-41squeeze2 Binary firmware for various driver Versions of packages linux-image-3.2.0-0.bpo.2-amd64 suggests: ii grub-pc 1.98+20100804-14+squeeze1 GRand Unified Bootloader, version pn linux-doc-3.2 <none> (no description available) Versions of packages linux-image-3.2.0-0.bpo.2-amd64 is related to: pn firmware-atheros <none> (no description available) pn firmware-bnx2 <none> (no description available) pn firmware-bnx2x <none> (no description available) pn firmware-brcm80211 <none> (no description available) pn firmware-intelwimax <none> (no description available) pn firmware-ipw2x00 <none> (no description available) pn firmware-ivtv <none> (no description available) pn firmware-iwlwifi <none> (no description available) pn firmware-libertas <none> (no description available) pn firmware-linux <none> (no description available) ii firmware-linux-nonfree 0.35~bpo60+1 Binary firmware for various driver pn firmware-myricom <none> (no description available) pn firmware-netxen <none> (no description available) pn firmware-qlogic <none> (no description available) pn firmware-ralink <none> (no description available) pn firmware-realtek <none> (no description available) pn xen-hypervisor <none> (no description available) -- debconf information: linux-image-3.2.0-0.bpo.2-amd64/postinst/depmod-error-initrd-3.2.0-0.bpo.2-amd64: false linux-image-3.2.0-0.bpo.2-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-0.bpo.2-amd64/postinst/missing-firmware-3.2.0-0.bpo.2-amd64: linux-image-3.2.0-0.bpo.2-amd64/prerm/removing-running-kernel-3.2.0-0.bpo.2-amd64: true -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20120426085331.3277.80003.report...@bach.esat.kuleuven.be
