Package: linux-2.6 Version: 3.2.16-1 Severity: normal Tags: upstream Hi,
I'm running linux-image-3.2.0-2-686-pae version 3.2.16-1 on debian wheezy. I unsuccessfully tried version 3.2.17-1 from sid. The laptop is a Fujitsu Siemens Amilo pi2515. My /proc/bus/input/devices says: [...] I: Bus=0011 Vendor=0002 Product=0001 Version=0063 N: Name="PS/2 Logitech Wheel Mouse" P: Phys=isa0060/serio4/input0 S: Sysfs=/devices/platform/i8042/serio4/input/input7 U: Uniq= H: Handlers=mouse0 event7 B: PROP=0 B: EV=7 B: KEY=70000 0 0 0 0 0 0 0 0 B: REL=103 [...] Any hint? -- Package-specific info: ** Version: Linux version 3.2.0-2-686-pae (Debian 3.2.16-1) ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-4) ) #1 SMP Mon Apr 30 05:59:35 UTC 2012 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=ce754bd4-1e36-4c3a-9343-dfa48ae2e393 ro quiet splash ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 3245.820683] pcieport 0000:00:1c.3: restoring config space at offset 0xf (was 0x40400, writing 0x4040a) [ 3245.820698] pcieport 0000:00:1c.3: restoring config space at offset 0x9 (was 0x10001, writing 0xf5f1f401) [ 3245.820704] pcieport 0000:00:1c.3: restoring config space at offset 0x8 (was 0x0, writing 0xfbf0fa00) [ 3245.820711] pcieport 0000:00:1c.3: restoring config space at offset 0x7 (was 0x20000000, writing 0x4040) [ 3245.820722] pcieport 0000:00:1c.3: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [ 3245.820730] pcieport 0000:00:1c.3: restoring config space at offset 0x1 (was 0x100000, writing 0x100507) [ 3245.820796] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 3245.820822] uhci_hcd 0000:00:1d.0: wake-up capability disabled by ACPI [ 3245.820852] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 3245.820878] uhci_hcd 0000:00:1d.1: wake-up capability disabled by ACPI [ 3245.820908] uhci_hcd 0000:00:1d.2: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001) [ 3245.820933] uhci_hcd 0000:00:1d.2: wake-up capability disabled by ACPI [ 3245.820973] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102) [ 3245.820993] ehci_hcd 0000:00:1d.7: wake-up capability disabled by ACPI [ 3245.821000] ehci_hcd 0000:00:1d.7: PME# disabled [ 3245.821022] pci 0000:00:1e.0: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [ 3245.821028] pci 0000:00:1e.0: restoring config space at offset 0x8 (was 0x0, writing 0xfff0) [ 3245.821034] pci 0000:00:1e.0: restoring config space at offset 0x7 (was 0x22800000, writing 0x228000f0) [ 3245.821048] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100004, writing 0x100107) [ 3245.821101] pci 0000:00:1f.0: restoring config space at offset 0x1 (was 0x2100007, writing 0x2100107) [ 3245.821122] ata_piix 0000:00:1f.1: restoring config space at offset 0xf (was 0x100, writing 0x1ff) [ 3245.821149] ata_piix 0000:00:1f.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2880005) [ 3245.821173] ahci 0000:00:1f.2: restoring config space at offset 0xf (was 0x200, writing 0x20a) [ 3245.821200] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [ 3245.821255] pci 0000:00:1f.3: restoring config space at offset 0x4 (was 0x0, writing 0x80000000) [ 3245.821335] iwl3945 0000:04:00.0: restoring config space at offset 0xf (was 0x100, writing 0x107) [ 3245.821404] iwl3945 0000:04:00.0: restoring config space at offset 0x4 (was 0x0, writing 0xf8000000) [ 3245.821418] iwl3945 0000:04:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 3245.821438] iwl3945 0000:04:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x100506) [ 3245.821586] r8169 0000:06:00.0: restoring config space at offset 0xf (was 0x100, writing 0x10a) [ 3245.821613] r8169 0000:06:00.0: restoring config space at offset 0x6 (was 0x4, writing 0xfa000004) [ 3245.821623] r8169 0000:06:00.0: restoring config space at offset 0x4 (was 0x1, writing 0x4001) [ 3245.821631] r8169 0000:06:00.0: restoring config space at offset 0x3 (was 0x0, writing 0x10) [ 3245.821642] r8169 0000:06:00.0: restoring config space at offset 0x1 (was 0x100000, writing 0x40100507) [ 3245.821814] PM: early resume of devices complete after 1.710 msecs [ 3245.821886] i915 0000:00:02.0: setting latency timer to 64 [ 3245.821931] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3245.821943] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 3245.822073] usb usb3: root hub lost power or was reset [ 3245.822113] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 3245.822227] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 3245.822534] usb usb4: root hub lost power or was reset [ 3245.822613] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3245.822765] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 3245.822996] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 3245.823111] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 3245.824207] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X [ 3245.825245] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY [ 3245.825475] pciehp 0000:00:1c.2:pcie04: pciehp_resume ENTRY [ 3245.825668] pciehp 0000:00:1c.3:pcie04: pciehp_resume ENTRY [ 3245.825708] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3245.825860] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 3245.826168] usb usb5: root hub lost power or was reset [ 3245.826207] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 3245.826321] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 3245.826514] usb usb6: root hub lost power or was reset [ 3245.826553] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3245.826783] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 3245.826923] usb usb7: root hub lost power or was reset [ 3245.826938] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 3245.826946] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 3245.826975] pci 0000:00:1e.0: setting latency timer to 64 [ 3245.826987] ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 3245.826992] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 3245.827015] ahci 0000:00:1f.2: setting latency timer to 64 [ 3245.827086] pci 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 [ 3245.827111] r8169 0000:06:00.0: wake-up capability disabled by ACPI [ 3245.827119] r8169 0000:06:00.0: PME# disabled [ 3245.828321] sd 0:0:0:0: [sda] Starting disk [ 3246.040408] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out [ 3246.040413] ata4.00: ACPI cmd ef/03:42:00:00:00:a0 (SET FEATURES) filtered out [ 3246.144029] ata2: SATA link down (SStatus 0 SControl 300) [ 3246.148037] ata3: SATA link down (SStatus 0 SControl 300) [ 3246.168286] ata4.00: configured for UDMA/33 [ 3246.932032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3246.937056] ata1.00: unexpected _GTF length (8) [ 3246.939278] ata1.00: unexpected _GTF length (8) [ 3246.939632] ata1.00: configured for UDMA/133 [ 3247.015546] PM: resume of devices complete after 1193.690 msecs [ 3247.015713] PM: Finishing wakeup. [ 3247.015715] Restarting tasks ... done. [ 3247.016333] video LNXVIDEO:00: Restoring backlight state [ 3248.370219] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3248.373771] r8169 0000:06:00.0: eth0: link down [ 3248.373999] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3256.678968] wlan0: authenticate with 00:12:17:bc:d1:8b (try 1) [ 3256.680773] wlan0: authenticated [ 3256.681135] wlan0: associate with 00:12:17:bc:d1:8b (try 1) [ 3256.683549] wlan0: RX AssocResp from 00:12:17:bc:d1:8b (capab=0x411 status=0 aid=2) [ 3256.683557] wlan0: associated [ 3256.685308] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3257.639833] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) [ 3267.472019] wlan0: no IPv6 routers present [ 6835.525370] Netfilter messages via NETLINK v0.30. [ 7008.464048] device wlan0 entered promiscuous mode [ 7257.790686] device wlan0 left promiscuous mode [ 7395.720843] device wlan0 entered promiscuous mode [ 7401.097911] device wlan0 left promiscuous mode [ 7725.876076] device wlan0 entered promiscuous mode [ 9476.111946] device wlan0 left promiscuous mode ** Model information not available ** Loaded modules: nfnetlink_log nfnetlink vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) pci_stub snd_hrtimer cryptd aes_i586 aes_generic acpi_cpufreq mperf cpufreq_conservative cpufreq_userspace cpufreq_stats cpufreq_powersave parport_pc ppdev lp parport bnep rfcomm bluetooth binfmt_misc uinput fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc kvm_intel kvm loop snd_hda_codec_realtek arc4 sr_mod cdrom snd_hda_codec_si3054 iwl3945 iwl_legacy snd_hda_intel mac80211 snd_hda_codec ata_generic snd_hwdep snd_pcm_oss uhci_hcd cfg80211 snd_mixer_oss ata_piix snd_pcm ehci_hcd usbcore r8169 rfkill snd_page_alloc snd_seq_midi snd_seq_midi_event mii snd_rawmidi snd_seq snd_seq_device snd_timer snd iTCO_wdt pcspkr battery processor ac iTCO_vendor_support soundcore i2c_i801 power_supply psmouse usb_common serio_raw evdev ext4 crc16 jbd2 mbcache sd_mod crc_t10dif i915 ahci libahci libata i2c_algo_bit drm_kms_helper drm scsi_mod video thermal button i2c_core thermal_sys ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 03) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) [8086:2a02] (rev 03) (prog-if 00 [VGA controller]) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at fc000000 (64-bit, non-prefetchable) [size=1M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 1800 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) [8086:2a03] (rev 03) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fc100000 (64-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at 1820 [size=32] Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at 1840 [size=32] Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fc404800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 03) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at fc400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f6000000-f7ffffff Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f8000000-f9ffffff Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=07, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: fa000000-fbffffff Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at 1860 [size=32] Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at 1880 [size=32] Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at 18a0 [size=32] Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI]) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fc404c00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f3) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=08, subordinate=08, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801HM (ICH8M) LPC Interface Controller [8086:2815] (rev 03) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.1 IDE interface [0101]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP]) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 01f0 [size=8] Region 1: I/O ports at 03f4 [size=1] Region 2: I/O ports at 0170 [size=8] Region 3: I/O ports at 0374 [size=1] Region 4: I/O ports at 1810 [size=16] Kernel driver in use: ata_piix 00:1f.2 SATA controller [0106]: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [AHCI mode] [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at 1c00 [size=8] Region 1: I/O ports at 18d4 [size=4] Region 2: I/O ports at 18d8 [size=8] Region 3: I/O ports at 18d0 [size=4] Region 4: I/O ports at 18e0 [size=32] Region 5: Memory at fc404000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 03) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 19 Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1c20 [size=32] 04:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection [8086:4222] (rev 02) Subsystem: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:1001] Physical Slot: 4 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 47 Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: iwl3945 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 01) Subsystem: Fujitsu Technology Solutions Device [1734:1108] Physical Slot: 5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: I/O ports at 4000 [size=256] Region 2: Memory at fa000000 (64-bit, non-prefetchable) [size=4K] [virtual] Expansion ROM at f4000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: r8169 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 3.2.0-2-686-pae (SMP w/2 CPU cores) Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-2-686-pae depends on: ii debconf [debconf-2.0] 1.5.43 ii initramfs-tools [linux-initramfs-tool] 0.102 ii kmod 6-2 ii linux-base 3.5 ii module-init-tools 6-2 Versions of packages linux-image-3.2.0-2-686-pae recommends: ii firmware-linux-free 3 ii libc6-i686 2.13-32 Versions of packages linux-image-3.2.0-2-686-pae suggests: pn extlinux 2:4.05+dfsg-2 pn grub-pc 1.99-21 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-2-686-pae is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi 0.35 pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-2-686-pae/prerm/removing-running-kernel-3.2.0-2-686-pae: true linux-image-3.2.0-2-686-pae/postinst/depmod-error-initrd-3.2.0-2-686-pae: false linux-image-3.2.0-2-686-pae/postinst/ignoring-ramdisk: * linux-image-3.2.0-2-686-pae/postinst/missing-firmware-3.2.0-2-686-pae: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/20120519233207.11454.65547.reportbug@ehehehpc
