--- Begin Message ---
Package: linux-image-2.6.28-1-amd64
Version: 2.6.28-1
Severity: normal
A Logitech MX900 Bluetooth mouse connected to its Bluetooth WirelessHub
in HCI mode 'stutters'/'lags' as if input events are lumped together
only a few times per second. This happens since the recent kernel upgrade
from 2.6.26-1.
$ grep HID /etc/default/bluetooth
HID2HCI_ENABLED=1
HIDD_ENABLED=1
HIDD_OPTIONS="--master --server"
The same mouse works smoothly in HCI mode with the kernel from
linux-image-2.6.26-1-amd64 2.6.26-13.
It also works in both 2.6.26 and 2.6.28 kernels if the bluetooth dongle
is in HID mode.
I also tested a Nintendo wiimote with wminput 0.6.00-4. It works
smoothly in both kernels.
-- Package-specific info:
** Version:
Linux version 2.6.28-1-amd64 (Debian 2.6.28-1) (m...@debian.org) (gcc
version 4.3.3 (Debian 4.3.3-4) ) #1 SMP Wed Feb 18 17:16:12 UTC 2009
** Command line:
root=/dev/sda1 ro vdso32=0 single
** Tainted: P M (17)
** Kernel log:
[ 2.804621] usbcore: registered new interface driver usbhid
[ 2.804662] usbhid: v2.6:USB HID core driver
[ 2.982526] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.310528] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.316311] Uniform Multi-Platform E-IDE driver
[ 3.326928] Driver 'sd' needs updating - please use bus_type methods
[ 3.327033] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors:
(200 GB/186 GiB)
[ 3.327075] sd 0:0:0:0: [sda] Write Protect is off
[ 3.327105] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.327122] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.327202] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors:
(200 GB/186 GiB)
[ 3.327242] sd 0:0:0:0: [sda] Write Protect is off
[ 3.327270] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.327287] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[ 3.327321] sda: sda1 sda2 < sda5 sda6 >
[ 3.361000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.879546] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 3.879578] EXT3-fs: write access will be enabled during recovery.
[ 4.474861] kjournald starting. Commit interval 5 seconds
[ 4.477027] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 4.477058] ext3_orphan_cleanup: truncating inode 318672 to 0 bytes
[ 4.477084] EXT3-fs: sda1: 1 truncate cleaned up
[ 4.477111] EXT3-fs: recovery complete.
[ 4.484883] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.667970] udevd version 125 started
[ 5.936693] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.989530] ACPI: Power Button (FF) [PWRF]
[ 5.989627] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 6.005516] ACPI: Power Button (CM) [PWRB]
[ 6.377836] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.04
[ 6.377948] iTCO_wdt: Found a ICH10R TCO device (Version=2, TCOBASE=0x0860)
[ 6.378009] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.453658] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level,
low) -> IRQ 18
[ 6.453698] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts
with ACPI region SMRG [0x400-0x40f]
[ 6.453736] ACPI: Device needs an ACPI driver
[ 6.510006] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[ 6.510094] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.918110] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level,
low) -> IRQ 17
[ 6.918198] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 7.741795] Unable to find swap-space signature
[ 7.970193] EXT3 FS on sda1, internal journal
[ 8.793958] loop: module loaded
[ 8.867784] coretemp coretemp.0: Using relative temperature scale!
[ 8.867847] coretemp coretemp.1: Using relative temperature scale!
[ 8.867897] coretemp coretemp.2: Using relative temperature scale!
[ 8.867950] coretemp coretemp.3: Using relative temperature scale!
[ 8.898671] w83627ehf: Found W83627EHG chip at 0x290
[ 9.338787] kjournald starting. Commit interval 5 seconds
[ 9.339157] EXT3 FS on sda6, internal journal
[ 9.339212] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.363638] Unable to find swap-space signature
[ 10.950059] sky2 eth0: enabling interface
[ 31.916034] firewire_core: giving up on config rom for node id ffc0
[ 85.183134] fglrx: module license 'Proprietary. (C) 2002 - ATI
Technologies, Starnberg, GERMANY' taints kernel.
[ 85.197173] [fglrx] Maximum main memory to use for locked dma
buffers: 3802 MBytes.
[ 85.197574] [fglrx] vendor: 1002 device: 9442 count: 1
[ 85.198176] [fglrx] ioport: bar 4, base 0xb000, size: 0x100
[ 85.198211] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 85.198242] pci 0000:01:00.0: setting latency timer to 64
[ 85.200969] [fglrx] Driver built-in PAT support is enabled successfully
[ 85.201024] [fglrx] module loaded - fglrx 8.58.2 [Feb 4 2009] with 1 minors
[ 87.341679] NET: Registered protocol family 10
[ 87.342022] lo: Disabled Privacy Extensions
[ 87.342475] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 87.938028] lp: driver loaded but no devices found
[ 87.941965] ppdev: user-space parallel port driver
[ 90.534735] Bluetooth: Core ver 2.13
[ 90.534868] NET: Registered protocol family 31
[ 90.534896] Bluetooth: HCI device and connection manager initialized
[ 90.534926] Bluetooth: HCI socket layer initialized
[ 90.549875] Bluetooth: L2CAP ver 2.11
[ 90.549907] Bluetooth: L2CAP socket layer initialized
[ 90.557170] Bluetooth: RFCOMM socket layer initialized
[ 90.557206] Bluetooth: RFCOMM TTY layer initialized
[ 90.557235] Bluetooth: RFCOMM ver 1.10
[ 90.587964] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 91.293870] usb 4-2.2: new full speed USB device using uhci_hcd and address 4
[ 91.495939] usb 4-2.2: configuration #1 chosen from 1 choice
[ 91.500053] usb 4-2.2: New USB device found, idVendor=046d, idProduct=c707
[ 91.500083] usb 4-2.2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[ 91.500115] usb 4-2.2: Product: Logitech Bluetooth wireless hub
[ 91.500144] usb 4-2.2: Manufacturer: Logitech
[ 91.500172] usb 4-2.2: SerialNumber: 052CBB
[ 91.511628] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 91.511732] usbcore: registered new interface driver btusb
[ 95.673224] skge eth1: enabling interface
[ 95.676745] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 96.221913] fglrx_pci 0000:01:00.0: irq 4346 for MSI/MSI-X
[ 96.231604] [fglrx] Firegl kernel thread PID: 4655
[ 96.253412] [fglrx] Gart USWC size:1918 M.
[ 96.253415] [fglrx] Gart cacheable size:60 M.
[ 96.253420] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 96.253421] [fglrx] Reserved FB block: Unshared offset:fc17000, size:3e9000
[ 96.253423] [fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000
[ 97.341727] skge eth1: Link is up at 100 Mbps, full duplex, flow control both
[ 97.342086] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 107.600004] eth1: no IPv6 routers present
[ 111.788037] input: Logitech Bluetooth Mouse as
/devices/pci0000:00/0000:00:1d.0/usb4/4-2/4-2.2/4-2.2:1.0/bluetooth/hci0/hci0:41/input5
[ 111.817571] generic-bluetooth 0005:046D:B001.0003: input,hidraw2:
BLUETOOTH HID v22.00 Mouse [Logitech Bluetooth Mouse] on
00:07:61:05:2C:BB
[ 301.780018] Machine check events logged
** Loaded modules:
Module Size Used by
btusb 77976 3
hidp 81280 3
rfcomm 102304 2
l2cap 86656 18 hidp,rfcomm
bluetooth 120740 8 btusb,hidp,rfcomm,l2cap
binfmt_misc 74892 1
ppdev 73096 0
parport_pc 92312 0
lp 75876 0
parport 103328 3 ppdev,parport_pc,lp
ipv6 348928 32
cpufreq_stats 70404 0
cpufreq_powersave 67328 0
cpufreq_conservative 72712 0
cpufreq_userspace 69252 0
fglrx 2408360 30
w83627ehf 87568 0
hwmon_vid 68608 1 w83627ehf
coretemp 72192 0
firewire_sbp2 80912 0
loop 80652 0
snd_hda_intel 553796 1
i2c_i801 75292 0
i2c_core 90528 1 i2c_i801
snd_pcm 144264 1 snd_hda_intel
snd_seq 115568 0
snd_timer 87824 2 snd_pcm,snd_seq
iTCO_wdt 78032 0
snd_seq_device 73108 1 snd_seq
evdev 76304 3
intel_agp 93936 0
snd 125432 7
snd_hda_intel,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 73488 1 snd
snd_page_alloc 75280 2 snd_hda_intel,snd_pcm
button 72992 0
ext3 186768 2
jbd 116264 1 ext3
mbcache 74628 1 ext3
sd_mod 97576 3
crc_t10dif 67712 1 sd_mod
ide_pci_generic 70148 0
ide_core 178284 1 ide_pci_generic
usbhid 98864 0
hid 107152 2 hidp,usbhid
ata_generic 71556 0
firewire_ohci 88708 0
firewire_core 104256 2 firewire_sbp2,firewire_ohci
ata_piix 88836 0
pata_marvell 70144 2
ahci 97932 0
crc_itu_t 67840 1 firewire_core
skge 104720 0
libata 237504 4 ata_generic,ata_piix,pata_marvell,ahci
sky2 113156 0
scsi_mod 229160 3 firewire_sbp2,sd_mod,libata
ehci_hcd 99852 0
uhci_hcd 87968 0
thermal 84384 0
processor 111544 1 thermal
fan 70920 0
thermal_sys 78656 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM
Controller [8086:2e20] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:82d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI
Express Root Port [8086:2e21] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1a.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB UHCI Controller #4 [8086:3a37] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at a800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB UHCI Controller #5 [8086:3a38] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at a880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB UHCI Controller #6 [8086:3a39] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ac00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB2 EHCI Controller #2 [8086:3a3c] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801JI (ICH10 Family)
HD Audio Controller [8086:3a3e]
Subsystem: ASUSTeK Computer Inc. Device [1043:8311]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fe7f8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family)
PCI Express Port 1 [8086:3a40] (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.4 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family)
PCI Express Port 5 [8086:3a48] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1c.5 PCI bridge [0604]: Intel Corporation 82801JI (ICH10 Family)
PCI Express Port 6 [8086:3a4a] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
00:1d.0 USB Controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB UHCI Controller #1 [8086:3a34] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at a080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB UHCI Controller #2 [8086:3a35] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at a400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB UHCI Controller #3 [8086:3a36] (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at a480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801JI (ICH10
Family) USB2 EHCI Controller #1 [8086:3a3a] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge
[8086:244e] (rev 90) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JIR (ICH10R) LPC
Interface Controller [8086:3a16]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family)
4 port SATA IDE Controller [8086:3a20] (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 8c00 [size=4]
Region 2: I/O ports at 8880 [size=8]
Region 3: I/O ports at 8800 [size=4]
Region 4: I/O ports at 8480 [size=16]
Region 5: I/O ports at 8400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801JI (ICH10 Family) SMBus
Controller [8086:3a30]
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7ff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JI (ICH10 Family)
2 port SATA IDE Controller [8086:3a26] (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:82d4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at 9880 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9480 [size=16]
Region 5: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV770
[Radeon HD 4850] [1002:9442] (prog-if 00 [VGA controller])
Subsystem: Giga-byte Technology Device [1458:21b8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 4346
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at fe8e0000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at b000 [size=256]
Expansion ROM at fe8c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: fglrx_pci
01:00.1 Audio device [0403]: ATI Technologies Inc HD48x0 audio [1002:aa30]
Subsystem: Giga-byte Technology Device [1458:aa30]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe8fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
02:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8056 PCI-E Gigabit Ethernet Controller [11ab:4364] (rev 12)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 4347
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Region 2: I/O ports at c800 [size=256]
Expansion ROM at fe9c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: sky2
03:00.0 IDE interface [0101]: Marvell Technology Group Ltd. 88SE6121
SATA II Controller [11ab:6121] (rev b1) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8212]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at dc00 [size=8]
Region 1: I/O ports at d880 [size=4]
Region 2: I/O ports at d800 [size=8]
Region 3: I/O ports at d480 [size=4]
Region 4: I/O ports at d400 [size=16]
Region 5: Memory at feaffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: pata_marvell
05:02.0 Ethernet controller [0200]: Marvell Technology Group Ltd.
88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 14)
Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet
Controller (Asus) [1043:811a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at febfc000 (32-bit, non-prefetchable) [size=16K]
Region 1: I/O ports at e800 [size=256]
Expansion ROM at f0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: skge
05:03.0 FireWire (IEEE 1394) [0c00]: Agere Systems FW323 [11c1:5811]
(rev 70) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8294]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (3000ns min, 6000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at febfb000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
-- System Information:
Debian Release: squeeze/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.28-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.28-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.26 Debian configuration management sy
ii initramfs-tools [linux-initra 0.93 tools for generating an initramfs
ii module-init-tools 3.7-pre5-1 tools for managing Linux kernel mo
linux-image-2.6.28-1-amd64 recommends no packages.
Versions of packages linux-image-2.6.28-1-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.28 <none> (no description available)
-- debconf information excluded
--- End Message ---