Package: src:linux Version: 3.2.23-1 Severity: normal
Hello, When compiling a big .deb package, my machine started to heat quite a lot, and after these messages throttling down [trying to?], it was shut down abruptly. Kernel log retrieved from the previous boot. Regards. -- Package-specific info: ** Version: Linux version 3.2.0-3-amd64 (Debian 3.2.23-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-8) ) #1 SMP Mon Jul 23 02:45:17 UTC 2012 ** Not tainted ** Kernel log: [... Cut from before the shut down ...] Oct 8 18:55:00 lugh kernel: [ 20.895863] eth0: no IPv6 routers present Oct 8 20:15:52 lugh kernel: [ 4866.848215] CPU3: Core temperature above threshold, cpu clock throttled (total events = 1) Oct 8 20:15:52 lugh kernel: [ 4866.848219] CPU1: Core temperature above threshold, cpu clock throttled (total events = 1) Oct 8 20:15:52 lugh kernel: [ 4866.848223] CPU2: Package temperature above threshold, cpu clock throttled (total events = 1) Oct 8 20:15:52 lugh kernel: [ 4866.848227] CPU0: Package temperature above threshold, cpu clock throttled (total events = 1) Oct 8 20:15:52 lugh kernel: [ 4866.848230] CPU1: Package temperature above threshold, cpu clock throttled (total events = 1) Oct 8 20:15:52 lugh kernel: [ 4866.848233] CPU3: Package temperature above threshold, cpu clock throttled (total events = 1) Oct 8 20:15:52 lugh kernel: [ 4866.849183] CPU1: Core temperature/speed normal Oct 8 20:15:52 lugh kernel: [ 4866.849186] CPU3: Core temperature/speed normal Oct 8 20:15:52 lugh kernel: [ 4866.849189] CPU2: Package temperature/speed normal Oct 8 20:15:52 lugh kernel: [ 4866.849191] CPU0: Package temperature/speed normal Oct 8 20:15:52 lugh kernel: [ 4866.849193] CPU3: Package temperature/speed normal Oct 8 20:15:52 lugh kernel: [ 4866.849196] CPU1: Package temperature/speed normal Oct 8 20:19:36 lugh kernel: [ 5090.303889] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478) Oct 8 20:19:36 lugh kernel: [ 5090.303901] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880129e7a268), AE_TIME (20110623/psparse-536) Oct 8 20:19:36 lugh kernel: [ 5090.303912] ACPI Error: Method parse/execution failed [\ECRB] (Node ffff880129e7af60), AE_TIME (20110623/psparse-536) Oct 8 20:19:36 lugh kernel: [ 5090.303918] ACPI Error: Method parse/execution failed [\ECG5] (Node ffff880129e7ae48), AE_TIME (20110623/psparse-536) Oct 8 20:19:36 lugh kernel: [ 5090.303924] ACPI Error: Method parse/execution failed [\_SB_.AC__._PSR] (Node ffff880129e7b790), AE_TIME (20110623/psparse-536) Oct 8 20:19:36 lugh kernel: [ 5090.303935] ACPI Exception: AE_TIME, Error reading AC Adapter state (20110623/ac-118) Oct 8 20:19:37 lugh kernel: [ 5090.803218] ACPI: EC: input buffer is not empty, aborting transaction Oct 8 20:19:37 lugh kernel: [ 5090.803225] ACPI Exception: AE_TIME, Returned by Handler for [EmbeddedControl] (20110623/evregion-478) Oct 8 20:19:37 lugh kernel: [ 5090.803238] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.ECDV.ECR1] (Node ffff880129e7a268), AE_TIME (20110623/psparse-536) Oct 8 20:19:37 lugh kernel: [ 5090.803250] ACPI Error: Method parse/execution failed [\ECBT] (Node ffff880129e7afb0), AE_TIME (20110623/psparse-536) Oct 8 20:19:37 lugh kernel: [ 5090.803258] ACPI Error: Method parse/execution failed [\ECG2] (Node ffff880129e7aec0), AE_TIME (20110623/psparse-536) Oct 8 20:19:37 lugh kernel: [ 5090.803265] ACPI Error: Method parse/execution failed [\ECG6] (Node ffff880129e7add0), AE_TIME (20110623/psparse-536) Oct 8 20:19:37 lugh kernel: [ 5090.803272] ACPI Error: Method parse/execution failed [\_SB_.BAT0._BST] (Node ffff880129e7b628), AE_TIME (20110623/psparse-536) Oct 8 20:19:37 lugh kernel: [ 5090.803285] ACPI Exception: AE_TIME, Evaluating _BST (20110623/battery-455) Oct 8 20:20:14 lugh kernel: imklog 5.8.11, log source = /proc/kmsg started. [...] ** Model information sys_vendor: Dell Inc. product_name: Latitude E5520 product_version: 01 chassis_vendor: Dell Inc. chassis_version: bios_vendor: Dell Inc. bios_version: A01 board_vendor: Dell Inc. board_name: 03PH4G board_version: A01 ** Loaded modules: cpufreq_userspace cpufreq_stats cpufreq_powersave cpufreq_conservative uinput fuse snd_hda_codec_hdmi snd_hda_codec_idt joydev snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi coretemp crc32c_intel snd_seq psmouse dell_laptop ghash_clmulni_intel dell_wmi arc4 sparse_keymap aesni_intel aes_x86_64 aes_generic cryptd dcdbas evdev serio_raw iwlwifi i915 snd_seq_device battery parport_pc parport snd_timer i2c_i801 mac80211 drm_kms_helper snd video drm i2c_algo_bit i2c_core wmi iTCO_wdt acpi_cpufreq cfg80211 iTCO_vendor_support mperf ac power_supply soundcore rfkill button processor ext4 crc16 jbd2 mbcache microcode sg sd_mod sr_mod cdrom crc_t10dif ahci libahci firewire_ohci libata firewire_core crc_itu_t sdhci_pci sdhci mmc_core thermal thermal_sys ehci_hcd scsi_mod tg3 libphy usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Dell Device [1028:049a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Dell Device [1028:049a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at e1c00000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 7000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Dell Device [1028:049a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at e3d80000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:049a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at e3d50000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04) Subsystem: Dell Device [1028:049a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at e3d40000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: e3c00000-e3cfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=08, sec-latency=0 I/O behind bridge: 00006000-00006fff Memory behind bridge: e3100000-e3afffff Prefetchable memory behind bridge: 00000000e1100000-00000000e1afffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 [8086:1c1a] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=09, subordinate=09, sec-latency=0 Memory behind bridge: e3b00000-e3bfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 [8086:1c1c] (rev b4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0a, subordinate=11, sec-latency=0 I/O behind bridge: 00002000-00005fff Memory behind bridge: e2000000-e30fffff Prefetchable memory behind bridge: 00000000e0000000-00000000e10fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI]) Subsystem: Dell Device [1028:049a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 17 Region 0: Memory at e3d30000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 04) Subsystem: Dell Device [1028:049a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device [1028:049a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 42 Region 0: I/O ports at 70b0 [size=8] Region 1: I/O ports at 70a0 [size=4] Region 2: I/O ports at 7090 [size=8] Region 3: I/O ports at 7080 [size=4] Region 4: I/O ports at 7060 [size=32] Region 5: Memory at e3d20000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04) Subsystem: Dell Device [1028:049a] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at e3d10000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 7040 [size=32] 02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6205 [8086:0082] (rev 34) Subsystem: Intel Corporation Centrino Advanced-N 6205 AGN [8086:1321] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at e3c00000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi 09:00.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. 1394 OHCI Compliant Host Controller [1217:13f7] (rev 05) (prog-if 10 [OHCI]) Subsystem: Dell Device [1028:049a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at e3b30000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 09:00.1 SD Host controller [0805]: O2 Micro, Inc. Integrated MMC/SD controller [1217:8321] (rev 05) (prog-if 01) Subsystem: Dell Device [1028:049a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 18 Region 0: Memory at e3b20000 (32-bit, non-prefetchable) [size=512] Capabilities: <access denied> Kernel driver in use: sdhci-pci 09:00.2 Mass storage controller [0180]: O2 Micro, Inc. O2 Flash Memory Card [1217:8331] (rev 05) Subsystem: Dell Device [1028:049a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 11 Region 0: Memory at e3b10000 (32-bit, non-prefetchable) [size=1K] Region 2: Memory at e3b00000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> 0a:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5761 Gigabit Ethernet PCIe [14e4:1681] (rev 10) Subsystem: Dell Device [1028:049a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at e2010000 (64-bit, non-prefetchable) [size=64K] Region 2: Memory at e2000000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 1bcf:280b Sunplus Innovation Technology Inc. -- System Information: Debian Release: wheezy/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.2.0-3-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-3-amd64 depends on: ii debconf [debconf-2.0] 1.5.46 ii initramfs-tools [linux-initramfs-tool] 0.108 ii kmod 9-2 ii linux-base 3.5 ii module-init-tools 9-2 Versions of packages linux-image-3.2.0-3-amd64 recommends: ii firmware-linux-free 3.1 Versions of packages linux-image-3.2.0-3-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-23 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-3-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> ii firmware-iwlwifi 0.36 pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-3-amd64/postinst/depmod-error-initrd-3.2.0-3-amd64: false linux-image-3.2.0-3-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-3-amd64/postinst/missing-firmware-3.2.0-3-amd64: linux-image-3.2.0-3-amd64/prerm/removing-running-kernel-3.2.0-3-amd64: true -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20121008193843.3205.93511.report...@lugh.itsari.org