--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-45
Severity: normal
/etc/init.d/networking restart
does it come up as 1Gbit/s
Regards,
Michael
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:00:17 UTC 2012
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-amd64 root=/dev/md2 ro console=tty0
console=ttyS0,115200n8 vga=normal com1=115200,8n1
** Not tainted
** Kernel log:
[ 4.084621] PM: Checking hibernation image.
[ 4.097086] PM: Error -22 checking image file
[ 4.097089] PM: Resume from disk failed.
[ 4.097163] usb 2-1: configuration #1 chosen from 1 choice
[ 4.113162] REISERFS (device md2): found reiserfs format "3.6" with standard
journal
[ 4.115164] usbcore: registered new interface driver hiddev
[ 4.128291] REISERFS (device md2): using ordered data mode
[ 4.129091] input: ServerEngines SE USB Device as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input1
[ 4.129140] generic-usb 0003:0000:0000.0001: input,hidraw0: USB HID v1.11
Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-1/input0
[ 4.133079] input: ServerEngines SE USB Device as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input2
[ 4.133208] generic-usb 0003:0000:0000.0002: input,hidraw1: USB HID v1.11
Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-1/input1
[ 4.133239] usbcore: registered new interface driver usbhid
[ 4.133293] usbhid: v2.6:USB HID core driver
[ 4.217683] REISERFS (device md2): journal params: device md2, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 4.235049] REISERFS (device md2): checking transaction log (md2)
[ 4.322286] REISERFS (device md2): Using r5 hash to sort names
[ 5.574757] udev[437]: starting version 164
[ 5.965531] processor LNXCPU:00: registered as cooling_device0
[ 5.967142] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 5.967149] ACPI: Power Button [PWRB]
[ 5.985911] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 5.994335] ACPI: Power Button [PWRF]
[ 5.999287] processor LNXCPU:01: registered as cooling_device1
[ 6.006651] processor LNXCPU:02: registered as cooling_device2
[ 6.014048] processor LNXCPU:03: registered as cooling_device3
[ 6.021440] processor LNXCPU:04: registered as cooling_device4
[ 6.028785] processor LNXCPU:05: registered as cooling_device5
[ 6.036342] processor LNXCPU:06: registered as cooling_device6
[ 6.043688] processor LNXCPU:07: registered as cooling_device7
[ 6.299286] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.734755] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.751415] EDAC MC: Ver: 2.1.0 May 6 2012
[ 6.757489] EDAC MC0: Giving out device to 'i5400_edac.c' 'I5400': DEV
0000:00:10.0
[ 6.766201] EDAC PCI0: Giving out device to module 'i5400_edac' controller
'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
[ 6.779310] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 6.814094] intel_rng: FWH not detected
[ 6.890395] Error: Driver 'pcspkr' is already registered, aborting...
[ 7.345329] Adding 16000632k swap on /dev/md1. Priority:-1 extents:1
across:16000632k
[ 7.722448] Uniform Multi-Platform E-IDE driver
[ 7.796690] ide-cd driver 5.00
[ 7.847942] ide_generic: please use "probe_mask=0x3f" module parameter for
probing all legacy ISA IDE ports
[ 8.002664] ipmi message handler version 39.2
[ 8.069831] IPMI System Interface driver.
[ 8.074410] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o
address 0xca2, slave address 0x20, irq 0
[ 8.271033] ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x2001, dev_id:
0x12)
[ 8.279648] IPMI kcs interface initialized
[ 8.284328] ipmi_si: Trying ACPI-specified kcs state machine at i/o address
0xca2, slave address 0x0, irq 0
[ 8.295346] ipmi_si: duplicate interface
[ 9.297574] kjournald starting. Commit interval 5 seconds
[ 9.333946] EXT3 FS on md0, internal journal
[ 9.338887] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.346407] REISERFS (device dm-0): found reiserfs format "3.6" with
standard journal
[ 9.355306] REISERFS (device dm-0): using ordered data mode
[ 9.361925] REISERFS (device dm-0): journal params: device dm-0, size 8192,
journal first block 18, max trans len 1024, max batch 900, max commit age 30,
max trans age 30
[ 9.379487] REISERFS (device dm-0): checking transaction log (dm-0)
[ 9.523034] REISERFS (device dm-0): Using r5 hash to sort names
[ 11.228088] alloc irq_desc for 79 on node -1
[ 11.228092] alloc kstat_irqs on node -1
[ 11.228109] tg3 0000:03:00.0: irq 79 for MSI/MSI-X
[ 11.277823] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 13.660806] tg3 0000:03:00.0: eth0: Link is up at 10 Mbps, half duplex
[ 13.664101] tg3 0000:03:00.0: eth0: Flow control is off for TX and off for RX
[ 13.677307] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 23.920008] eth0: no IPv6 routers present
[ 38.375679] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 41.208431] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 41.215615] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please
use
[ 41.224007] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module
option or
[ 41.232979] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 42.057029] device eth0 entered promiscuous mode
[ 64.665266] device eth0 left promiscuous mode
[ 102.435439] warning: `proftpd' uses 32-bit capabilities (legacy support in
use)
[ 102.435443] warning: `proftpd' uses 32-bit capabilities (legacy support in
use)
[ 214.763454] tg3 0000:03:00.0: PME# enabled
[ 215.249583] tg3 0000:03:00.0: irq 79 for MSI/MSI-X
[ 215.298600] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 217.812149] tg3 0000:03:00.0: eth0: Link is up at 1000 Mbps, full duplex
[ 217.819756] tg3 0000:03:00.0: eth0: Flow control is on for TX and on for RX
[ 217.828924] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 227.924006] eth0: no IPv6 routers present
[ 426.249066] alloc irq_desc for 80 on node -1
[ 426.249070] alloc kstat_irqs on node -1
[ 426.249087] tg3 0000:04:00.0: irq 80 for MSI/MSI-X
[ 426.302214] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 519.159261] tg3 0000:04:00.0: PME# enabled
[ 3805.220337] ipmi device interface
[ 5844.248764] TCP: Peer 94.192.159.219:54440/80 unexpectedly shrunk window
2343419551:2343425391 (repaired)
[ 5844.732762] TCP: Peer 94.192.159.219:54440/80 unexpectedly shrunk window
2343419551:2343425391 (repaired)
[ 6263.640554] usb 2-1: USB disconnect, address 2
[ 6268.384294] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 6268.560760] usb 2-1: New USB device found, idVendor=0000, idProduct=0000
[ 6268.568654] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6268.577006] usb 2-1: Product: SE USB Device
[ 6268.581975] usb 2-1: Manufacturer: ServerEngines
[ 6268.587400] usb 2-1: SerialNumber: 6005544094870A
[ 6268.593176] usb 2-1: configuration #1 chosen from 1 choice
[ 6268.620261] input: ServerEngines SE USB Device as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input6
[ 6268.632184] generic-usb 0003:0000:0000.0003: input,hidraw0: USB HID v1.11
Keyboard [ServerEngines SE USB Device] on usb-0000:00:1d.0-1/input0
[ 6268.654075] input: ServerEngines SE USB Device as
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.1/input/input7
[ 6268.666085] generic-usb 0003:0000:0000.0004: input,hidraw1: USB HID v1.11
Mouse [ServerEngines SE USB Device] on usb-0000:00:1d.0-1/input1
** Model information
sys_vendor: HP
product_name: ProLiant DL160 G5
product_version:
chassis_vendor: HP
chassis_version:
bios_vendor: HP
bios_version: O12
** Loaded modules:
Module Size Used by
ipmi_devintf 6587 0
iptable_mangle 2817 1
xt_MARK 917 1
xt_multiport 2267 3
ipt_REJECT 1953 15
nf_conntrack_ipv4 9833 93
nf_defrag_ipv4 1139 1 nf_conntrack_ipv4
xt_state 1303 93
nf_conntrack_ftp 5537 0
nf_conntrack 46535 3 nf_conntrack_ipv4,xt_state,nf_conntrack_ftp
xt_tcpudp 2319 409
iptable_filter 2258 1
ip_tables 13915 2 iptable_mangle,iptable_filter
x_tables 12845 6
xt_MARK,xt_multiport,ipt_REJECT,xt_state,xt_tcpudp,ip_tables
ext3 106710 1
jbd 37317 1 ext3
mbcache 5050 1 ext3
coretemp 4325 0
ipmi_si 30960 0
ipmi_msghandler 26634 2 ipmi_devintf,ipmi_si
ide_generic 1121 0 [permanent]
ide_cd_mod 24744 0
ide_core 71722 2 ide_generic,ide_cd_mod
rng_core 3006 0
shpchp 26248 0
i5400_edac 6680 0
edac_core 29261 3 i5400_edac
pci_hotplug 21587 1 shpchp
snd_pcm 60487 0
snd_timer 15598 1 snd_pcm
snd 46526 2 snd_pcm,snd_timer
soundcore 4598 1 snd
snd_page_alloc 6249 1 snd_pcm
pcspkr 1699 0
i5k_amb 4439 0
evdev 7352 3
button 4650 0
processor 29935 0
usbhid 33292 0
hid 63257 1 usbhid
reiserfs 194124 2
dm_mod 53946 3
raid1 18431 4
md_mod 73920 5 raid1
sg 24069 0
uhci_hcd 18521 0
sr_mod 12602 0
sd_mod 29937 5
cdrom 29351 2 ide_cd_mod,sr_mod
crc_t10dif 1276 1 sd_mod
ehci_hcd 32097 0
ata_generic 3239 0
ata_piix 21124 4
libata 133776 2 ata_generic,ata_piix
usbcore 123122 4 usbhid,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
scsi_mod 126725 4 sg,sr_mod,sd_mod,libata
tg3 104334 0
libphy 14054 1 tg3
thermal 11674 0
thermal_sys 11942 2 processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5400 Chipset Memory Controller
Hub [8086:4003] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:31f5]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 5400 Chipset PCI Express Port 1
[8086:4021] (rev 20) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Intel Corporation 5400 Chipset PCI Express Port 5
[8086:4025] (rev 20) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:09.0 PCI bridge [0604]: Intel Corporation 5400 Chipset PCI Express Port 9
[8086:4029] (rev 20) (prog-if 00 [Normal decode])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=08, sec-latency=0
Memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:10.0 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers
[8086:4030] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:31f5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5400_edac
00:10.1 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers
[8086:4030] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:31f5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.2 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers
[8086:4030] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:31f5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.3 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers
[8086:4030] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:31f5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.4 Host bridge [0600]: Intel Corporation 5400 Chipset FSB Registers
[8086:4030] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:31f5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:11.0 Host bridge [0600]: Intel Corporation 5400 Chipset CE/SF Registers
[8086:4031] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:31f5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers
[8086:4035] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:31f5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:15.1 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers
[8086:4035] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:31f5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers
[8086:4036] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:31f5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:16.1 Host bridge [0600]: Intel Corporation 5400 Chipset FBD Registers
[8086:4036] (rev 20)
Subsystem: Hewlett-Packard Company Device [103c:31f5]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI
Express Root Port 1 [8086:2690] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fcb00000-fdbfffff
Prefetchable memory behind bridge: 00000000faa00000-00000000fc9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI
Express Root Port 2 [8086:2692] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: fdc00000-fdcfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI
Express Root Port 3 [8086:2694] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fdd00000-fddfffff
Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at e080 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at e000 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at dc00 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at fdfff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
d9) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC
Interface Controller [8086:2670] (rev 09)
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller
[8086:269e] (rev 09) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company Device [103c:31fe]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 631xESB/632xESB/3100 Chipset
SATA IDE Controller [8086:2680] (rev 09) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: Hewlett-Packard Company Device [103c:31f6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e880 [size=4]
Region 2: I/O ports at e800 [size=8]
Region 3: I/O ports at e480 [size=4]
Region 4: I/O ports at e400 [size=16]
Region 5: Memory at fdfffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ata_piix
02:00.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200e
[Pilot] ServerEngines (SEP1) [102b:0522] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:31fa]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at fb000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at fdbfc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fd000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at fdbe0000 [disabled] [size=64K]
Capabilities: <access denied>
03:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5722
Gigabit Ethernet PCI Express [14e4:165a]
Subsystem: Hewlett-Packard Company NC105i PCIe Gigabit Server Adapter
[103c:7051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 79
Region 0: Memory at fdcf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
04:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5722
Gigabit Ethernet PCI Express [14e4:165a]
Subsystem: Hewlett-Packard Company NC105i PCIe Gigabit Server Adapter
[103c:7051]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fddf0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
05:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=06, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to
PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=05, secondary=08, subordinate=08, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
06:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=06, secondary=07, subordinate=07, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0000:0000
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.5
APT prefers oldstable
APT policy: (500, 'oldstable'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_GB, LC_CTYPE=en_GB (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-45 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-45 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.28+squeeze1 Binary firmware for various driver
ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
* linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
--- End Message ---