--- Begin Message ---
Package: linux-2.6
Version: 2.6.32-35
Severity: normal
When a process exceeds 2^31-1 (probably) milliseconds of CPU, the CPU time
counter becomes corrupt. I have noted the
following effects:
1) The process disappears altogether from top (although the overall usage stats
show it to be running)
2) ps shows it as having about 107000 days of CPU time (this has happened twice
and the values were similar but not the same).
The CPU used shown does not change thereafter.
3) The Fortran cpu_time subroutine is returning a value that cannot be
contained by an F12.2 format.
The program showing this behaviour is a multi-threaded Fortran program using
openmp.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35) (da...@debian.org) (gcc version
4.3.5 (Debian 4.3.5-4) ) #1 SMP Tue Jun 14 09:42:28 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64
root=UUID=d6f0eba9-34b3-4611-9c53-c5add4d475ba ro quiet
** Not tainted
** Kernel log:
[3787284.372253] ata1.00: configured for UDMA/33
[3787284.384645] ata1: EH complete
[3790126.013583] ata1.00: qc timeout (cmd 0xa0)
[3790126.013616] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[3790126.024247] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[3790126.024267] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[3790126.024268] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5
(timeout)
[3790126.045306] ata1.00: status: { DRDY ERR }
[3790126.055880] ata1: soft resetting link
[3790126.277349] ata1.00: configured for UDMA/33
[3790126.289766] ata1: EH complete
[3796622.772435] ata1: lost interrupt (Status 0x58)
[3796622.812765] ata1: drained 32768 bytes to clear DRQ.
[3796622.846094] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[3796622.856720] ata1.00: ATAPI check failed (ireason=0x1 bytes=8)
[3796622.867231] sr 0:0:0:0: CDB: Get event status notification: 4a 01 00 00 10
00 00 00 08 00
[3796622.867277] ata1.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio
16392 in
[3796622.867286] res 58/00:01:00:08:00/00:00:00:00:00/a0 Emask 0x2
(HSM violation)
[3796622.888327] ata1.00: status: { DRDY DRQ }
[3796622.898811] ata1: soft resetting link
[3796623.133731] ata1.00: configured for UDMA/33
[3796623.146139] ata1: EH complete
[3835031.109809] ata1.00: qc timeout (cmd 0xa0)
[3835031.109829] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[3835031.120334] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[3835031.120347] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[3835031.120349] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5
(timeout)
[3835031.141291] ata1.00: status: { DRDY ERR }
[3835031.151736] ata1: soft resetting link
[3835031.378066] ata1.00: configured for UDMA/33
[3835031.390446] ata1: EH complete
[3836095.820064] ata1: lost interrupt (Status 0x58)
[3836095.854730] ata1: drained 32768 bytes to clear DRQ.
[3836095.893809] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[3836095.904277] ata1.00: ATAPI check failed (ireason=0x1 bytes=8)
[3836095.914704] sr 0:0:0:0: CDB: Get event status notification: 4a 01 00 00 10
00 00 00 08 00
[3836095.914716] ata1.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio
16392 in
[3836095.914718] res 58/00:01:00:08:00/00:00:00:00:00/a0 Emask 0x2
(HSM violation)
[3836095.935571] ata1.00: status: { DRDY DRQ }
[3836095.945966] ata1: soft resetting link
[3836096.177225] ata1.00: configured for UDMA/33
[3836096.189651] ata1: EH complete
[3837592.000137] ata1.00: qc timeout (cmd 0xa0)
[3837592.000171] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[3837592.010691] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[3837592.010778] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[3837592.010781] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5
(timeout)
[3837592.031693] ata1.00: status: { DRDY ERR }
[3837592.042144] ata1: soft resetting link
[3837592.284365] ata1.00: configured for UDMA/33
[3837592.296812] ata1: EH complete
[3837736.021310] ata1.00: qc timeout (cmd 0xa0)
[3837736.021332] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[3837736.031742] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[3837736.031752] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[3837736.031754] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5
(timeout)
[3837736.052521] ata1.00: status: { DRDY ERR }
[3837736.062860] ata1: soft resetting link
[3837736.289996] ata1.00: configured for UDMA/33
[3837736.302457] ata1: EH complete
[3838556.113357] ata1.00: qc timeout (cmd 0xa0)
[3838556.113387] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[3838556.123848] sr 0:0:0:0: CDB: Test Unit Ready: 00 00 00 00 00 00
[3838556.123870] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[3838556.123871] res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5
(timeout)
[3838556.144628] ata1.00: status: { DRDY ERR }
[3838556.154969] ata1: soft resetting link
[3838556.380277] ata1.00: configured for UDMA/33
[3838556.392747] ata1: EH complete
[3846040.733836] ata1: lost interrupt (Status 0x58)
[3846040.765859] ata1: drained 32768 bytes to clear DRQ.
[3846040.813067] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[3846040.823393] ata1.00: ATAPI check failed (ireason=0x1 bytes=8)
[3846040.833703] sr 0:0:0:0: CDB: Get event status notification: 4a 01 00 00 10
00 00 00 08 00
[3846040.833723] ata1.00: cmd a0/00:00:00:08:00/00:00:00:00:00/a0 tag 0 pio
16392 in
[3846040.833724] res 58/00:01:00:08:00/00:00:00:00:00/a0 Emask 0x2
(HSM violation)
[3846040.854423] ata1.00: status: { DRDY DRQ }
[3846040.864796] ata1: soft resetting link
[3846041.093594] ata1.00: configured for UDMA/33
[3846041.106017] ata1: EH complete
[3847874.733841] ata1: lost interrupt (Status 0x58)
[3847874.779465] ata1: drained 32768 bytes to clear DRQ.
[3847874.807468] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[3847874.817808] sr 0:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00
00
[3847874.817818] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[3847874.817820] res 58/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2
(HSM violation)
[3847874.838384] ata1.00: status: { DRDY DRQ }
[3847874.848763] ata1: soft resetting link
[3847875.077261] ata1.00: configured for UDMA/33
[3847875.089725] ata1: EH complete
[3858355.733794] ata1: lost interrupt (Status 0x58)
[3858355.742069] ata1: drained 32768 bytes to clear DRQ.
[3858355.809906] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
frozen
[3858355.820321] sr 0:0:0:0: CDB: Prevent/Allow Medium Removal: 1e 00 00 00 00
00
[3858355.820339] ata1.00: cmd a0/00:00:00:00:00/00:00:00:00:00/a0 tag 0
[3858355.820340] res 58/00:01:00:00:00/00:00:00:00:00/a0 Emask 0x2
(HSM violation)
[3858355.840994] ata1.00: status: { DRDY DRQ }
[3858355.851367] ata1: soft resetting link
[3858356.076246] ata1.00: configured for UDMA/33
[3858356.088632] ata1: EH complete
** Model information
sys_vendor: ASUS
product_name: RS162-E4/RX4
product_version: 1.00
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: Phoenix Technologies LTD
bios_version: 1013
board_vendor: ASUS
board_name: DSBF-DR12/SAS
board_version: 1.06G
** Loaded modules:
Module Size Used by
tcp_diag 880 0
inet_diag 6914 1 tcp_diag
parport_pc 18855 0
ppdev 5030 0
lp 7462 0
parport 27954 3 parport_pc,ppdev,lp
sco 7225 2
bridge 39630 0
stp 1440 1 bridge
bnep 9427 2
l2cap 24736 3 bnep
crc16 1319 1 l2cap
bluetooth 41827 5 sco,bnep,l2cap
rfkill 13044 2 bluetooth
battery 4998 0
autofs4 20805 5
cpufreq_stats 2659 0
cpufreq_userspace 1992 0
cpufreq_powersave 902 0
cpufreq_conservative 5162 0
nfsd 254782 2
exportfs 3170 1 nfsd
nfs 241226 26
lockd 57603 2 nfsd,nfs
fscache 29834 1 nfs
nfs_acl 2031 2 nfsd,nfs
auth_rpcgss 33476 2 nfsd,nfs
sunrpc 161541 54 nfsd,nfs,lockd,nfs_acl,auth_rpcgss
fuse 50892 1
loop 11799 0
radeon 574844 1
ttm 40146 1 radeon
drm_kms_helper 20369 1 radeon
shpchp 26264 0
drm 142327 3 radeon,ttm,drm_kms_helper
i5000_edac 7284 0
i2c_algo_bit 4225 1 radeon
edac_core 29261 3 i5000_edac
i2c_i801 7830 0
i5k_amb 4439 0
ioatdma 34876 9
container 2389 0
dca 3761 1 ioatdma
rng_core 3006 0
i2c_core 15819 5 radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
button 4650 0
pci_hotplug 21203 1 shpchp
pcspkr 1699 0
serio_raw 3752 0
evdev 7352 4
processor 29935 0
ext3 106630 2
jbd 37085 1 ext3
mbcache 5050 1 ext3
dm_mod 53706 6
sd_mod 29921 10
crc_t10dif 1276 1 sd_mod
usbhid 33292 0
hid 63257 1 usbhid
sg 24069 0
sr_mod 12602 1
mptsas 29188 6
cdrom 29415 1 sr_mod
mptscsih 16360 1 mptsas
ata_generic 3239 0
mptbase 48382 2 mptsas,mptscsih
ata_piix 21124 1
scsi_transport_sas 19865 1 mptsas
libata 133760 2 ata_generic,ata_piix
scsi_mod 126517 7
sd_mod,sg,sr_mod,mptsas,mptscsih,scsi_transport_sas,libata
uhci_hcd 18521 0
ehci_hcd 32081 0
usbcore 122498 4 usbhid,uhci_hcd,ehci_hcd
nls_base 6377 1 usbcore
floppy 49087 0
e1000e 110063 0
thermal 11674 0
thermal_sys 11942 2 processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5000P Chipset Memory Controller
Hub [8086:25d8] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:81db]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 0
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 2 [8086:25e2] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
Memory behind bridge: c8100000-c81fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 3 [8086:25e3] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c8200000-c82fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8
Port 4-5 [8086:25f8] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 5 [8086:25e5] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8
Port 6-7 [8086:25f9] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x4
Port 7 [8086:25e7] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation 5000 Series Chipset DMA
Engine [8086:1a38] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:81db]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 84
Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ioatdma
00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers
[8086:25f0] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:81db]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Kernel driver in use: i5000_edac
00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers
[8086:25f0] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:81db]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers
[8086:25f0] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:81db]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved
Registers [8086:25f1] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:81db]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved
Registers [8086:25f3] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:81db]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers
[8086:25f5] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:81db]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers
[8086:25f6] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:81db]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
00:1c.0 PCI bridge [0604]: Intel Corporation 631xESB/632xESB/3100 Chipset PCI
Express Root Port 1 [8086:2690] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=0c, subordinate=0d, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c8300000-c84fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81dc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 4: I/O ports at 1800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81dc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1820 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #3 [8086:268a] (rev 09) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81dc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
UHCI USB Controller #4 [8086:268b] (rev 09) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81dc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at 1860 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset
EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:81dc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at c8000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev
d9) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=32
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c8500000-c85fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d7ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC
Interface Controller [8086:2670] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:81dc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 631xESB/632xESB IDE Controller
[8086:269e] (rev 09) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:81dc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 1880 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 631xESB/632xESB/3100 Chipset
SATA IDE Controller [8086:2680] (rev 09) (prog-if 8f [Master SecP SecO PriP
PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81dc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at 18c8 [size=8]
Region 1: I/O ports at 18ac [size=4]
Region 2: I/O ports at 18c0 [size=8]
Region 3: I/O ports at 18a8 [size=4]
Region 4: I/O ports at 18b0 [size=16]
Region 5: Memory at c8000400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus
Controller [8086:269b] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:81dc]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1100 [size=32]
Kernel driver in use: i801_smbus
01:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=01, secondary=02, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
01:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to
PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=01, secondary=06, subordinate=06, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
02:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
02:01.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Downstream Port E2 [8086:3514] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
02:02.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express
Downstream Port E3 [8086:3518] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=02, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
07:00.0 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit
Ethernet Controller (Copper) [8086:1096] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:8217]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 82
Region 0: Memory at c8200000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
07:00.1 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit
Ethernet Controller (Copper) [8086:1096] (rev 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:8217]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 83
Region 0: Memory at c8220000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at 2020 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
0c:00.0 PCI bridge [0604]: Intel Corporation 6702PXH PCI Express-to-PCI Bridge
A [8086:032c] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=0c, secondary=0d, subordinate=0d, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: c8400000-c84fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c01fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0c:00.1 PIC [0800]: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt
Controller A [8086:0326] (rev 09) (prog-if 20 [IO(X)-APIC])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at c8300000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
0d:03.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1068 PCI-X
Fusion-MPT SAS [1000:0054] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:81dd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (16000ns min, 2500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 50
Region 0: I/O ports at 3000 [disabled] [size=256]
Region 1: Memory at c8410000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at c8400000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0000000 [disabled] [size=2M]
Capabilities: <access denied>
Kernel driver in use: mptsas
0e:02.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000
[1002:515e] (rev 02) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:81de]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping+ SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 4000 [size=256]
Region 2: Memory at c8500000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c8520000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
** Sound cards:
-- System Information:
Debian Release: 6.0.2
APT prefers stable
APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/8 CPU cores)
Locale: LANG=C, LC_CTYPE=en_US.ISO8859-1 (charmap=ANSI_X3.4-1968) (ignored:
LC_ALL set to C)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-35 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
ii firmware-linux-free 2.6.32-35 Binary firmware for various driver
Versions of packages linux-image-2.6.32-5-amd64 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
--- End Message ---
