Package: src:linux Version: 3.9.6-1~bpo70+1 Severity: normal Hi!
I've upgraded the kernel on my QNAP to 3.9. Unfortunately, network is now stuck around 1 MBit/s and I'm seeing lots of error messages in syslog like the ones below: [ 203.642744] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 203.642783] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors Regards Christoph -- Package-specific info: ** Version: Linux version 3.9-0.bpo.1-kirkwood (debian-kernel@lists.debian.org) (gcc version 4.7.2 (Debian 4.7.2-5) ) #1 Debian 3.9.6-1~bpo70+1 ** Command line: root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816 ** Not tainted ** Kernel log: [ 72.697308] [ 72.697383] [ 72.697456] [ 72.697530] [ 72.697602] [ 72.697674] [ 72.697745] [ 72.697829] [ 72.697904] [ 72.697977] [ 72.698050] [ 72.698121] [ 72.698194] [ 72.698265] [ 72.698336] [ 72.698408] [ 72.698479] [ 72.698553] [ 72.698657] [ 72.700871] [ 72.703237] [ 72.703449] [ 74.094157] udevd[447]: starting version 175 [ 74.651014] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 74.835844] usbcore: registered new interface driver usbfs [ 74.835949] usbcore: registered new interface driver hub [ 74.842620] usbcore: registered new device driver usb [ 74.909213] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 74.950312] xhci_hcd 0000:01:01.0: xHCI Host Controller [ 74.950385] xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 1 [ 74.950808] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 74.950846] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 74.950874] usb usb1: Product: xHCI Host Controller [ 74.950897] usb usb1: Manufacturer: Linux 3.9-0.bpo.1-kirkwood xhci_hcd [ 74.950920] usb usb1: SerialNumber: 0000:01:01.0 [ 74.951409] xHCI xhci_add_endpoint called for root hub [ 74.951417] xHCI xhci_check_bandwidth called for root hub [ 74.951662] hub 1-0:1.0: USB hub found [ 74.951718] hub 1-0:1.0: 2 ports detected [ 74.952003] xhci_hcd 0000:01:01.0: xHCI Host Controller [ 74.952047] xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 2 [ 74.952136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 74.952167] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 74.952194] usb usb2: Product: xHCI Host Controller [ 74.952217] usb usb2: Manufacturer: Linux 3.9-0.bpo.1-kirkwood xhci_hcd [ 74.952240] usb usb2: SerialNumber: 0000:01:01.0 [ 74.954890] xHCI xhci_add_endpoint called for root hub [ 74.954900] xHCI xhci_check_bandwidth called for root hub [ 74.957249] hub 2-0:1.0: USB hub found [ 74.957323] hub 2-0:1.0: 2 ports detected [ 74.991892] ehci-orion: EHCI orion driver [ 75.073148] orion_wdt: Initial timeout 21 sec [ 75.073743] orion-ehci orion-ehci.0: EHCI Host Controller [ 75.073805] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 3 [ 75.073967] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000 [ 75.091216] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00 [ 75.091327] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 75.091359] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 75.091387] usb usb3: Product: EHCI Host Controller [ 75.091409] usb usb3: Manufacturer: Linux 3.9-0.bpo.1-kirkwood ehci_hcd [ 75.091433] usb usb3: SerialNumber: orion-ehci.0 [ 75.091858] hub 3-0:1.0: USB hub found [ 75.091906] hub 3-0:1.0: 1 port detected [ 75.411222] usb 3-1: new high-speed USB device number 2 using orion-ehci [ 75.562981] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608 [ 75.563045] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 75.563072] usb 3-1: Product: USB2.0 Hub [ 75.564265] hub 3-1:1.0: USB hub found [ 75.564606] hub 3-1:1.0: 4 ports detected [ 76.539311] EXT4-fs (dm-1): re-mounted. Opts: (null) [ 76.856608] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro [ 77.571414] loop: module loaded [ 79.684918] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null) [ 79.742391] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null) [ 79.801780] EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null) [ 79.858010] EXT4-fs (dm-5): mounted filesystem with ordered data mode. Opts: (null) [ 81.417984] RPC: Registered named UNIX socket transport module. [ 81.418044] RPC: Registered udp transport module. [ 81.418067] RPC: Registered tcp transport module. [ 81.418088] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 81.447038] FS-Cache: Loaded [ 81.454311] Key type dns_resolver registered [ 81.507694] FS-Cache: Netfs 'nfs' registered for caching [ 81.585295] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 86.593205] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 88.110251] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 88.122280] NFSD: starting 90-second grace period (net c0513db8) [ 89.327218] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 203.642744] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 203.642783] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 271.806746] mv643xx_eth_port mv643xx_eth_port.0 eth0: link down [ 274.519522] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled [ 437.735515] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 437.735557] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 455.638653] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 455.638698] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 519.603271] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 519.603314] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 569.880774] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors [ 569.880814] mv643xx_eth_port mv643xx_eth_port.0 eth0: received packet spanning multiple descriptors ** Model information Hardware : QNAP TS-41x Revision : 0000 ** Loaded modules: nfsd auth_rpcgss nfs_acl nfs lockd dns_resolver fscache sunrpc loop hmac evdev ehci_orion sha1_generic xhci_hcd ehci_hcd orion_wdt usbcore mv_cesa usb_common gpio_keys ext4 mbcache jbd2 dm_crypt dm_mod raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq md_mod netconsole configfs cbc xts gf128mul sd_mod crc_t10dif sata_mv mv643xx_eth inet_lro libphy libata scsi_mod ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 10.3.2.21 netmask 255.0.0.0 gateway 10.0.0.0 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 172.16.0.1 dns-search siccegge.de iface eth0 inet6 static address 2001:4dd0:ff00:8384::2 gateway 2001:4dd0:ff00:8384::1 netmask 64 ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000 link/ether 00:08:9b:d1:4b:10 brd ff:ff:ff:ff:ff:ff inet 10.3.2.21/8 brd 10.255.255.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::208:9bff:fed1:4b10/64 scope link valid_lft forever preferred_lft forever 3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000 link/ether 00:08:9b:d1:4b:11 brd ff:ff:ff:ff:ff:ff *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 260 4 0 0 0 0 0 0 260 4 0 0 0 0 0 0 eth1: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 53460325 58081 7123 7128 0 0 0 0 39292162 55347 0 0 0 0 0 0 *** Protocol statistics: Ip: 46584 total packets received 0 forwarded 0 incoming packets discarded 46474 incoming packets delivered 34634 requests sent out Icmp: 34 ICMP messages received 34 input ICMP message failed. ICMP input histogram: destination unreachable: 34 0 ICMP messages sent 0 ICMP messages failed ICMP output histogram: IcmpMsg: InType3: 34 Tcp: 6 active connections openings 5 passive connection openings 0 failed connection attempts 0 connection resets received 4 connections established 43475 segments received 54338 segments send out 205 segments retransmited 0 bad segments received. 0 resets sent Udp: 88 packets received 0 packets to unknown port received. 0 packet receive errors 95 packets sent UdpLite: TcpExt: 257 delayed acks sent 1 delayed acks further delayed because of locked socket Quick ack mode was activated 245 times 3 packets directly queued to recvmsg prequeue. 2 bytes directly received in process context from prequeue 10000 packet headers predicted 13129 acknowledgments not containing data payload received 2869 predicted acknowledgments 4 times recovered from packet loss by selective acknowledgements 11 congestion windows recovered without slow start after partial ack 48 fast retransmits 98 retransmits in slow start 56 other TCP timeouts 255 DSACKs sent for old packets 60 DSACKs sent for out of order packets 10 DSACKs received TCPDSACKIgnoredNoUndo: 1 TCPSackShifted: 5 TCPSackMerged: 12 TCPSackShiftFallback: 29 TCPRcvCoalesce: 14782 TCPOFOQueue: 10580 TCPOFOMerge: 60 IpExt: InNoRoutes: 1 InMcastPkts: 98 InBcastPkts: 2779 InOctets: 41731247 OutOctets: 37254231 InMcastOctets: 4164 InBcastOctets: 358222 ** PCI devices: 00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at <ignored> (64-bit, prefetchable) Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- 00:01.0 SCSI storage controller [0100]: Marvell Technology Group Ltd. 88SX7042 PCI-e 4-port SATA-II [11ab:7042] (rev 02) Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 9 Region 0: Memory at e0000000 (64-bit, non-prefetchable) [size=1M] Region 2: I/O ports at 1000 [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Latency L0 <256ns, L1 unlimited ClockPM- Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- Kernel driver in use: sata_mv 01:00.0 Host bridge [0600]: Marvell Technology Group Ltd. Device [11ab:6282] (rev 01) Subsystem: Marvell Technology Group Ltd. Device [11ab:11ab] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at <ignored> (64-bit, prefetchable) Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Address: 0000000000000000 Data: 0000 Capabilities: [60] Express (v1) Root Port (Slot-), MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <256ns, L1 <1us ExtTag- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn- 01:01.0 USB controller [0c03]: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] (rev 01) (prog-if 30 [XHCI]) Subsystem: Etron Technology, Inc. EJ168 USB 3.0 Host Controller [1b6f:7023] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at e8000000 (64-bit, non-prefetchable) [size=32K] Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] MSI: Enable- Count=1/4 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [a0] Express (v2) Endpoint, MSI 01 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <64us ClockPM+ Surprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Not Supported, TimeoutDis- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [190 v1] Device Serial Number 01-01-01-01-01-01-01-01 Kernel driver in use: xhci_hcd ** USB devices: Bus 003 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: 7.1 APT prefers stable APT policy: (990, 'stable'), (500, 'testing') Architecture: armel (armv5tel) Kernel: Linux 3.9-0.bpo.1-kirkwood Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.9-0.bpo.1-kirkwood depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.112~bpo70+1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.9-0.bpo.1-kirkwood recommends: ii firmware-linux-free 3.2 ii uboot-mkimage 2012.04.01-2 Versions of packages linux-image-3.9-0.bpo.1-kirkwood suggests: pn debian-kernel-handbook <none> pn fdutils <none> pn linux-doc-3.9 <none> Versions of packages linux-image-3.9-0.bpo.1-kirkwood is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.9-0.bpo.1-kirkwood/postinst/depmod-error-initrd-3.9-0.bpo.1-kirkwood: false linux-image-3.9-0.bpo.1-kirkwood/prerm/removing-running-kernel-3.9-0.bpo.1-kirkwood: true linux-image-3.9-0.bpo.1-kirkwood/postinst/ignoring-ramdisk: linux-image-3.9-0.bpo.1-kirkwood/postinst/missing-firmware-3.9-0.bpo.1-kirkwood: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130728154418.3008.33959.report...@backup.siccegge.de