Package: src:linux Version: 3.9.8-1 Followup-For: Bug #625211 No, with the radeon driver it works, sorry for not having checked that. There is already a bug open against fglrx-driver, as brightness is concerned: 719536. The problem remains that one need to specify the kernel attribute in the grub configuration file, it would be nice if that could be handled during installation. Thanks, Carlo.
-- Package-specific info: ** Version: Linux version 3.9-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.7.3 (Debian 4.7.3-5) ) #1 SMP Debian 3.9.8-1 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.9-1-amd64 root=UUID=221d4a92-44de-42bf-a8c4-1d8844595fbf ro acpi_backlight=vendor acpi_backlight=vendor ** Tainted: PO (4097) * Proprietary module has been loaded. * Out-of-tree module has been loaded. ** Kernel log: [ 5.657439] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x14, 0x0c. [ 5.734873] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 5.734962] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.735378] hub 1-1:1.0: USB hub found [ 5.735599] hub 1-1:1.0: 6 ports detected [ 5.775436] lib80211_crypt: registered algorithm 'TKIP' [ 5.775681] wlan0: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.112 [ 5.787049] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7 [ 5.846414] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 5.850581] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 5.978830] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3657 MBytes. [ 5.978930] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 5.979001] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 5.979162] <6>[fglrx] vendor: 1002 device: 68e0 count: 1 [ 5.979547] <6>[fglrx] ioport: bar 4, base 0xd000, size: 0x100 [ 5.979841] <6>[fglrx] Kernel PAT support is enabled [ 5.979934] <6>[fglrx] module loaded - fglrx 13.20.4 [Jul 26 2013] with 1 minors [ 5.980444] hub 2-1:1.0: USB hub found [ 5.980603] hub 2-1:1.0: 8 ports detected [ 6.017221] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 6.017393] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 6.017808] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client [ 6.017924] snd_hda_intel 0000:01:00.1: irq 44 for MSI/MSI-X [ 6.043568] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10 [ 6.050490] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 6.165448] usb 1-1.1: New USB device found, idVendor=1210, idProduct=25f4 [ 6.165533] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.165618] usb 1-1.1: Product: USB 2.0 PC Camera [ 6.165688] usb 1-1.1: Manufacturer: Alcor Micro, Corp. [ 6.250758] usb 2-1.3: new full-speed USB device number 3 using ehci-pci [ 6.347591] usb 2-1.3: New USB device found, idVendor=0a5c, idProduct=219c [ 6.347677] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.347762] usb 2-1.3: Product: Broadcom BCM2070 Bluetooth Device [ 6.347832] usb 2-1.3: Manufacturer: Broadcom Corp [ 6.347902] usb 2-1.3: SerialNumber: 001BB1F9E0EB [ 6.418548] usb 2-1.4: new high-speed USB device number 4 using ehci-pci [ 6.512591] usb 2-1.4: New USB device found, idVendor=058f, idProduct=6335 [ 6.512676] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.512761] usb 2-1.4: Product: Mass Storage Device [ 6.512824] usb 2-1.4: Manufacturer: Generic [ 6.512886] usb 2-1.4: SerialNumber: 058F63356336 [ 6.816996] Bluetooth: Core ver 2.16 [ 6.817110] NET: Registered protocol family 31 [ 6.817190] Bluetooth: HCI device and connection manager initialized [ 6.817278] Bluetooth: HCI socket layer initialized [ 6.817360] Bluetooth: L2CAP socket layer initialized [ 6.817435] Bluetooth: SCO socket layer initialized [ 6.861435] usbcore: registered new interface driver btusb [ 6.891589] cfg80211: World regulatory domain updated: [ 6.891653] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 6.891727] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.891802] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.891889] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 6.891963] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 6.892050] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 7.781854] media: Linux media interface: v0.10 [ 7.797364] Initializing USB Mass Storage driver... [ 7.797628] scsi5 : usb-storage 2-1.4:1.0 [ 7.797845] usbcore: registered new interface driver usb-storage [ 7.797918] USB Mass Storage support registered. [ 7.803907] Linux video capture interface: v2.00 [ 7.826159] uvcvideo: Found UVC 1.00 device USB 2.0 PC Camera (1210:25f4) [ 7.830062] input: USB 2.0 PC Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input11 [ 7.830331] usbcore: registered new interface driver uvcvideo [ 7.830410] USB Video Class driver (1.1.1) [ 8.711137] EXT4-fs (sda1): re-mounted. Opts: (null) [ 8.795961] scsi 5:0:0:0: Direct-Access Single Flash Reader 1.00 PQ: 0 ANSI: 0 [ 8.796542] sd 5:0:0:0: Attached scsi generic sg2 type 0 [ 9.012386] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro [ 9.103974] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 9.941550] fuse init (API version 7.21) [ 9.970367] loop: module loaded [ 10.272553] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 11.339964] RPC: Registered named UNIX socket transport module. [ 11.340064] RPC: Registered udp transport module. [ 11.340149] RPC: Registered tcp transport module. [ 11.340236] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 11.379679] FS-Cache: Loaded [ 11.386662] Key type dns_resolver registered [ 11.414930] FS-Cache: Netfs 'nfs' registered for caching [ 11.461785] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 13.565192] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 15.513620] Bluetooth: RFCOMM TTY layer initialized [ 15.513734] Bluetooth: RFCOMM socket layer initialized [ 15.513815] Bluetooth: RFCOMM ver 1.11 [ 15.578216] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 15.578308] Bluetooth: BNEP filters: protocol multicast [ 15.578392] Bluetooth: BNEP socket layer initialized [ 15.920223] lp: driver loaded but no devices found [ 16.119846] ppdev: user-space parallel port driver [ 179.932597] cfg80211: Calling CRDA to update world regulatory domain [ 179.942732] cfg80211: World regulatory domain updated: [ 179.942737] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 179.942739] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 179.942741] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 179.942743] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 179.942745] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 179.942748] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 305.696158] WebKitWebProces[5030]: segfault at 28 ip 00007fe7ea1697be sp 00007fff2d483710 error 4 in fglrx-libGL.so.1.2[7fe7ea130000+9a000] [ 368.524031] WebKitWebProces[5526]: segfault at 28 ip 00007fdc8f3fb7be sp 00007fff45c90660 error 4 in fglrx-libGL.so.1.2[7fdc8f3c2000+9a000] ** Model information sys_vendor: SAMSUNG ELECTRONICS CO., LTD. product_name: R540/R580/R780/SA41/E452/E852 product_version: 03KP chassis_vendor: SAMSUNG ELECTRONICS CO., LTD. chassis_version: N/A bios_vendor: American Megatrends Inc. bios_version: 03KP.M008.20100927.LDG board_vendor: SAMSUNG ELECTRONICS CO., LTD. board_name: R540/R580/R780/SA41/E452/E852 board_version: 03KP ** Loaded modules: parport_pc ppdev lp parport bnep rfcomm binfmt_misc uinput nfsd auth_rpcgss nfs_acl nfs lockd dns_resolver fscache sunrpc loop fuse uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev usb_storage media btusb bluetooth snd_hda_codec_hdmi snd_hda_codec_realtek joydev fglrx(PO) snd_hda_intel coretemp snd_hda_codec lib80211_crypt_tkip kvm_intel kvm snd_hwdep snd_pcm wl(PO) snd_page_alloc snd_seq iTCO_wdt iTCO_vendor_support sg ehci_pci lpc_ich i2c_i801 sr_mod crc32c_intel ehci_hcd mfd_core i2c_core cdrom samsung_laptop intel_ips snd_seq_device usbcore lib80211 cfg80211 acpi_cpufreq mperf sky2 processor snd_timer psmouse snd usb_common microcode rfkill soundcore pcspkr serio_raw evdev video battery button ac ext4 crc16 mbcache jbd2 sd_mod crc_t10dif thermal fan thermal_sys ahci libahci libata scsi_mod ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0044] (rev 02) Subsystem: Samsung Electronics Co Ltd Device [144d:c07f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express x16 Root Port [8086:0045] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: e0000000-f00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c07f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f4c08000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 05) Subsystem: Samsung Electronics Co Ltd Device [144d:c07f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f4c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f3800000-f4bfffff Prefetchable memory behind bridge: 00000000f4d00000-00000000f4efffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=05, sec-latency=0 I/O behind bridge: 00007000-0000afff Memory behind bridge: f0200000-f23fffff Prefetchable memory behind bridge: 00000000f4f00000-00000000f50fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: f2400000-f37fffff Prefetchable memory behind bridge: 00000000f5100000-00000000f52fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI]) Subsystem: Samsung Electronics Co Ltd Device [144d:c07f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f4c07000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=07, subordinate=07, sec-latency=32 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller [8086:3b09] (rev 05) Subsystem: Samsung Electronics Co Ltd Device [144d:c07f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller [8086:3b29] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Samsung Electronics Co Ltd Device [144d:c07f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 41 Region 0: I/O ports at e070 [size=8] Region 1: I/O ports at e060 [size=4] Region 2: I/O ports at e050 [size=8] Region 3: I/O ports at e040 [size=4] Region 4: I/O ports at e020 [size=32] Region 5: Memory at f4c06000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05) Subsystem: Samsung Electronics Co Ltd Device [144d:c07f] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f4c05000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at e000 [size=32] 00:1f.6 Signal processing controller [1180]: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem [8086:3b32] (rev 05) Subsystem: Samsung Electronics Co Ltd Device [144d:c07f] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at f4c04000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel ips 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Park [Mobility Radeon HD 5430/5450/5470] [1002:68e0] (prog-if 00 [VGA controller]) Subsystem: Samsung Electronics Co Ltd Device [144d:c07f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 2: Memory at f0020000 (64-bit, non-prefetchable) [size=128K] Region 4: I/O ports at d000 [size=256] Expansion ROM at f0000000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: fglrx_pci 01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series] [1002:aa68] Subsystem: Samsung Electronics Co Ltd Device [144d:c07f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 44 Region 0: Memory at f0040000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 02:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) Subsystem: Wistron NeWeb Corp. Device [185f:051a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f3800000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: wl 06:00.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller [11ab:4354] Subsystem: Samsung Electronics Co Ltd Device [144d:c07f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=16K] Region 2: I/O ports at b000 [size=256] Capabilities: <access denied> Kernel driver in use: sky2 3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers [8086:2c62] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2d01] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2d10] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2d11] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.2 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d12] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.3 Host bridge [0600]: Intel Corporation Core Processor Reserved [8086:2d13] (rev 02) Subsystem: Intel Corporation Device [8086:8086] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: Bus 002 Device 004: ID 058f:6335 Alcor Micro Corp. SD/MMC Card Reader Bus 002 Device 003: ID 0a5c:219c Broadcom Corp. Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 1210:25f4 DigiTech Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (900, 'testing'), (800, 'unstable'), (100, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.9-1-amd64 (SMP w/4 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.9-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.50 ii initramfs-tools [linux-initramfs-tool] 0.113 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.9-1-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.9-1-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u1 pn linux-doc-3.9 <none> Versions of packages linux-image-3.9-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.39 ii firmware-linux-nonfree 0.39 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.9-1-amd64/postinst/ignoring-ramdisk: linux-image-3.9-1-amd64/postinst/missing-firmware-3.9-1-amd64: linux-image-3.9-1-amd64/prerm/removing-running-kernel-3.9-1-amd64: true linux-image-3.9-1-amd64/postinst/depmod-error-initrd-3.9-1-amd64: false -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/20130814111538.5783.41563.reportbug@urano.solar