Package: src:linux Version: 3.2.57-3+deb7u2 Severity: normal Dear Maintainer,
Under this linux-image-3.2.0-4-amd64 kernel my blu Ray writer [sr1] has severe problems so that I can not writer a Blu Ray with it. But it writes perfectly under the older squeeze linux-image-2.6.32-5-amd64 kernel. This is how I presently work around the problem (boot the older kernel). It produces endless errors of the form: Jun 7 14:08:36 azza kernel: [569395.478041] end_request: I/O error, dev sr1, sector 0 Jun 7 14:08:36 azza kernel: [569395.481744] sr 6:0:0:0: [sr1] Unhandled sense code Jun 7 14:08:36 azza kernel: [569395.481746] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE Jun 7 14:08:36 azza kernel: [569395.481748] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current] Jun 7 14:08:36 azza kernel: [569395.481751] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information Jun 7 14:08:36 azza kernel: [569395.481754] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 ... Googling around I hit upon this http://forums.debian.net/viewtopic.php?f=7&t=111795&start=30 which references https://lkml.org/lkml/2014/5/9/363 and https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=701201 which suggested : libata.atapi_passthru16=0 is needed by some hardware I tried this which allowed me to write about half a bluRay and then it failed - leaving a half written unusable disc ! Would love a fix to avoid having to flick back to the older kernel which is really inconvient to others. Thinking about trying to build kernels back to 2.6.32 and seeing where the break is - but 2.6.32 appears to have *LOTS* of problems compiling with the wheezy set up (gcc 4.7.2)... Perhaps Jessie might be a better direction - but really want to run a stable kernel on this machine as it is used by other people. Andrew -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.57-3+deb7u2 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=c5c1b15a-a6fc-11e0-a2f4-001e8c7db70d ro nmi_watchdog=1 libata.atapi_passthru16=0 ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 30.012531] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current] [ 30.014528] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information [ 30.016534] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 30.018571] end_request: I/O error, dev sr1, sector 0 [ 30.029441] sr 6:0:0:0: [sr1] Unhandled sense code [ 30.031425] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 30.033432] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current] [ 30.035432] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information [ 30.037440] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 30.039476] end_request: I/O error, dev sr1, sector 0 [ 30.050342] sr 6:0:0:0: [sr1] Unhandled sense code [ 30.052329] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 30.054327] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current] [ 30.056332] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information [ 30.058334] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 30.060376] end_request: I/O error, dev sr1, sector 0 [ 30.071236] sr 6:0:0:0: [sr1] Unhandled sense code [ 30.073223] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 30.075221] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current] [ 30.077225] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information [ 30.079223] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 30.081266] end_request: I/O error, dev sr1, sector 0 [ 30.092129] sr 6:0:0:0: [sr1] Unhandled sense code [ 30.094107] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 30.096117] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current] [ 30.098117] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information [ 30.100123] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 30.102159] end_request: I/O error, dev sr1, sector 0 [ 30.113029] sr 6:0:0:0: [sr1] Unhandled sense code [ 30.115015] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 30.117024] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current] [ 30.119024] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information [ 30.121029] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 30.123067] end_request: I/O error, dev sr1, sector 0 [ 30.133933] sr 6:0:0:0: [sr1] Unhandled sense code [ 30.135916] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 30.137924] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current] [ 30.139921] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information [ 30.141927] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 30.143965] end_request: I/O error, dev sr1, sector 0 [ 30.154831] sr 6:0:0:0: [sr1] Unhandled sense code [ 30.156823] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 30.158822] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current] [ 30.160838] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information [ 30.162839] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 30.164882] end_request: I/O error, dev sr1, sector 0 [ 30.175745] sr 6:0:0:0: [sr1] Unhandled sense code [ 30.177736] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 30.179738] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current] [ 30.181742] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information [ 30.183743] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 30.185791] end_request: I/O error, dev sr1, sector 0 [ 30.196658] sr 6:0:0:0: [sr1] Unhandled sense code [ 30.198640] sr 6:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [ 30.200651] sr 6:0:0:0: [sr1] Sense Key : Blank Check [current] [ 30.202652] sr 6:0:0:0: [sr1] Add. Sense: No additional sense information [ 30.204664] sr 6:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 01 00 [ 30.206706] end_request: I/O error, dev sr1, sector 0 [ 34.776882] net eth1: Setting full-duplex based on MII#1 link partner capability of 45e1 [ 41.824049] eth1: no IPv6 routers present [ 46.574278] atl1 0000:01:00.0: irq 46 for MSI/MSI-X [ 46.574333] atl1 0000:01:00.0: eth0 link is up 100 Mbps full duplex [ 46.574371] atl1 0000:01:00.0: eth0 link is up 1000 Mbps full duplex [ 57.488012] eth0: no IPv6 routers present [ 60.977888] RPC: Registered named UNIX socket transport module. [ 60.979501] RPC: Registered udp transport module. [ 60.981130] RPC: Registered tcp transport module. [ 60.982712] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 61.034265] FS-Cache: Loaded [ 61.063708] FS-Cache: Netfs 'nfs' registered for caching [ 61.082234] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 62.923328] fuse init (API version 7.17) [ 63.311626] NET: Registered protocol family 15 [ 63.360549] alg: No test for cipher_null (cipher_null-generic) [ 63.362792] alg: No test for ecb(cipher_null) (ecb-cipher_null) [ 63.365032] alg: No test for digest_null (digest_null-generic) [ 63.367255] alg: No test for compress_null (compress_null-generic) [ 63.390701] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation [ 63.835153] ip_tables: (C) 2000-2006 Netfilter Core Team [ 63.940393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 68.127892] Bluetooth: Core ver 2.16 [ 68.130182] NET: Registered protocol family 31 [ 68.132346] Bluetooth: HCI device and connection manager initialized [ 68.134491] Bluetooth: HCI socket layer initialized [ 68.136625] Bluetooth: L2CAP socket layer initialized [ 68.138767] Bluetooth: SCO socket layer initialized [ 68.176776] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 68.178422] Bluetooth: BNEP filters: protocol multicast [ 68.224639] Bluetooth: RFCOMM TTY layer initialized [ 68.226266] Bluetooth: RFCOMM socket layer initialized [ 68.227868] Bluetooth: RFCOMM ver 1.11 [ 68.499257] lp0: using parport0 (interrupt-driven). [ 68.509398] ppdev: user-space parallel port driver [ 77.955567] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 77.984129] NFSD: starting 90-second grace period [ 80.433682] tun: Universal TUN/TAP device driver, 1.6 [ 80.433686] tun: (C) 1999-2004 Max Krasnyansky <m...@qualcomm.com> [74816.633848] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s) [76676.497136] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s) [82080.982359] RTL2832U usb_init_bulk_setting : USB2.0 HIGH SPEED (480Mb/s) ** Model information sys_vendor: System manufacturer product_name: P5E-V HDMI product_version: System Version chassis_vendor: Chassis Manufacture chassis_version: Chassis Version bios_vendor: American Megatrends Inc. bios_version: 0204 board_vendor: ASUSTeK Computer INC. board_name: P5E-V HDMI board_version: Rev 1.xx ** Loaded modules: tun cpufreq_stats cpufreq_conservative cpufreq_userspace cpufreq_powersave battery power_supply ppdev lp rfcomm bnep bluetooth rfkill binfmt_misc ipt_MASQUERADE iptable_nat nf_nat xt_TCPMSS xt_tcpmss iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack xt_tcpudp iptable_filter ip_tables x_tables deflate zlib_deflate twofish_generic ctr twofish_x86_64_3way twofish_x86_64 twofish_common camellia serpent blowfish_generic blowfish_x86_64 blowfish_common cast5 des_generic cbc cryptd aes_x86_64 aes_generic xcbc rmd160 sha512_generic sha256_generic sha1_ssse3 sha1_generic hmac crypto_null af_key fuse nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc ext2 ext4 crc16 jbd2 firewire_sbp2 loop kvm_intel kvm dvb_usb_rtl2832u(O) tda1004x snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm_oss snd_mixer_oss snd_pcm snd_page_alloc ir_lirc_codec lirc_dev ir_mce_kbd_decoder ir_sony_decoder snd_seq_midi snd_seq_midi_event ir_jvc_decoder i915 snd_rawmidi ir_rc6_decoder dvb_usb cdc_acm rc_hauppauge ir_rc5_decoder ir_nec_decoder budget_ci budget_core ttpci_eeprom psmouse saa7146 dvb_core rc_core video acpi_cpufreq mperf serio_raw pcspkr evdev drm_kms_helper drm i2c_algo_bit i2c_i801 iTCO_wdt parport_pc parport snd_seq snd_seq_device snd_timer coretemp processor snd iTCO_vendor_support thermal_sys i2c_core soundcore button asus_atk0110 ext3 mbcache jbd dm_mod raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 md_mod sg sr_mod cdrom sd_mod crc_t10dif usbhid hid ahci ata_generic firewire_ohci floppy libahci uhci_hcd firewire_core crc_itu_t tulip pata_jmicron libata ehci_hcd atl1 mii scsi_mod usbcore usb_common ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 82G35 Express DRAM Controller [8086:2980] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8295] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller [0300]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2982] (rev 03) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device [1043:8276] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 44 Region 0: Memory at fe700000 (32-bit, non-prefetchable) [size=1M] Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at cc00 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:02.1 Display controller [0380]: Intel Corporation 82G35 Express Integrated Graphics Controller [8086:2983] (rev 03) Subsystem: ASUSTeK Computer Inc. Device [1043:8276] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at fe800000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at c480 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at c800 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe6fbc00 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at fe6f4000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: f0400000-f07fffff Prefetchable memory behind bridge: 00000000fdf00000-00000000fdffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fea00000-feafffff Prefetchable memory behind bridge: 00000000f0200000-00000000f03fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: fe900000-fe9fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at c000 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at c080 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at c400 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fe6fb800 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: feb00000-febfffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+ BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 6 port SATA Controller [AHCI mode] [8086:2922] (rev 02) (prog-if 01 [AHCI 1.0]) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 43 Region 0: I/O ports at b880 [size=8] Region 1: I/O ports at b800 [size=4] Region 2: I/O ports at b480 [size=8] Region 3: I/O ports at b400 [size=4] Region 4: I/O ports at b080 [size=32] Region 5: Memory at fe6fa800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) Subsystem: ASUSTeK Computer Inc. Device [1043:8277] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fe6fb400 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0400 [size=32] 01:00.0 Ethernet controller [0200]: Atheros Communications Inc. Attansic L1 Gigabit Ethernet [1969:1048] (rev b0) Subsystem: ASUSTeK Computer Inc. P5KPL-VM Motherboard [1043:8226] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 46 Region 0: Memory at fe9c0000 (64-bit, non-prefetchable) [size=256K] Expansion ROM at fe9a0000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: atl1 02:00.0 IDE interface [0101]: JMicron Technology Corp. JMB368 IDE controller [197b:2368] (prog-if 85 [Master SecO PriO]) Subsystem: ASUSTeK Computer Inc. Device [1043:824f] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at dc00 [size=8] Region 1: I/O ports at d880 [size=4] Region 2: I/O ports at d800 [size=8] Region 3: I/O ports at d480 [size=4] Region 4: I/O ports at d400 [size=16] Expansion ROM at feaf0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: pata_jmicron 04:00.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at e880 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 04:00.1 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 62) (prog-if 00 [UHCI]) Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 17 Region 4: I/O ports at ec00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 04:00.2 USB controller [0c03]: VIA Technologies, Inc. USB 2.0 [1106:3104] (rev 65) (prog-if 20 [EHCI]) Subsystem: VIA Technologies, Inc. USB 2.0 [1106:3104] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci_hcd 04:01.0 Ethernet controller [0200]: Digital Equipment Corporation DECchip 21142/43 [1011:0019] (rev 41) Subsystem: Hewlett-Packard Company Device [103c:1066] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (5000ns min, 10000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 17 Region 0: I/O ports at e800 [size=128] Region 1: Memory at febff800 (32-bit, non-prefetchable) [size=1K] Expansion ROM at feb80000 [disabled] [size=256K] Kernel driver in use: tulip 04:02.0 Multimedia controller [0480]: Philips Semiconductors SAA7146 [1131:7146] (rev 01) Subsystem: Technotrend Systemtechnik GmbH Technotrend-Budget/Hauppauge WinTV-NOVA-T DVB card [13c2:1011] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (3750ns min, 9500ns max) Interrupt: pin A routed to IRQ 18 Region 0: Memory at febff400 (32-bit, non-prefetchable) [size=512] Kernel driver in use: budget_ci dvb 04:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev c0) (prog-if 10 [OHCI]) Subsystem: ASUSTeK Computer Inc. M4A series motherboard [1043:81fe] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (8000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at febfe800 (32-bit, non-prefetchable) [size=2K] Region 1: I/O ports at e480 [size=128] Capabilities: <access denied> Kernel driver in use: firewire_ohci ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 002: ID 413c:2101 Dell Computer Corp. SmartCard Reader Keyboard Bus 005 Device 003: ID 2341:0001 Arduino SA Uno (CDC ACM) Bus 006 Device 002: ID 1267:0201 Logic3 / SpectraVideo plc A4Tech SWOP-3 Mouse Bus 003 Device 002: ID 1f4d:a803 G-Tek Electronics Group Bus 003 Device 003: ID 1f4d:a803 G-Tek Electronics Group -- System Information: Debian Release: 7.5 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=en_AU.UTF-8, LC_CTYPE=en_AU.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-amd64 recommends: ii firmware-linux-free 3.2 Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u2 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> ii firmware-linux-nonfree 0.36+wheezy.1 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140627114528.11766.6009.report...@azza.tqc.com.au