Control: reopen -1

Christoph Egger <christ...@christoph-egger.org> writes:
> Sorry for the delay. I can't reproduce the problem using the current
> kernel.

Taking that back. Seems just suspending for a few seconds does not
trigger this behaviour. I had the computer in suspend over the night and
now it.s back

ethtool after boot
==================
RealTek RTL8168e/8111e registers:
--------------------------------------------------------
0x00: MAC Address                      48:5b:39:c9:ec:73
0x08: Multicast Address Filter     0xffffffff 0xffffffff
0x10: Dump Tally Counter Command   0xb3a479c0 0xe2ece169
0x20: Tx Normal Priority Ring Addr 0xcb818000 0x00000000
0x28: Tx High Priority Ring Addr   0xf740e900 0xc346a1a9
0x30: Flash memory read/write                 0x00000000
0x34: Early Rx Byte Count                              0
0x36: Early Rx Status                               0x00
0x37: Command                                       0x0c
      Rx on, Tx on
0x3C: Interrupt Mask                              0x803f
      SERR LinkChg RxNoBuf TxErr TxOK RxErr RxOK 
0x3E: Interrupt Status                            0x0000
      
0x40: Tx Configuration                        0x2f100700
0x44: Rx Configuration                        0x0002870f
0x48: Timer count                             0xfacc1c23
0x4C: Missed packet counter                     0xcc1cd1
0x50: EEPROM Command                                0x00
0x51: Config 0                                      0x04
0x52: Config 1                                      0xcf
0x53: Config 2                                      0x3d
0x54: Config 3                                      0x62
0x55: Config 4                                      0x55
0x56: Config 5                                      0x02
0x58: Timer interrupt                         0x00000000
0x5C: Multiple Interrupt Select                   0x0000
0x60: PHY access                              0x80001000
0x64: TBI control and status                  0x27ffff01
0x68: TBI Autonegotiation advertisement (ANAR)    0xf70c
0x6A: TBI Link partner ability (LPAR)             0x0000
0x6C: PHY status                                    0x93
0x84: PM wakeup frame 0            0x00000000 0xfacc26f1
0x8C: PM wakeup frame 1            0x00000000 0xe5a07be8
0x94: PM wakeup frame 2 (low)      0xf17a89a9 0x33e576f9
0x9C: PM wakeup frame 2 (high)     0xf760d3c8 0x834cf908
0xA4: PM wakeup frame 3 (low)      0xe202c8c9 0xf16fe3f9
0xAC: PM wakeup frame 3 (high)     0xf064f869 0x00000000
0xB4: PM wakeup frame 4 (low)      0x00000000 0x00000000
0xBC: PM wakeup frame 4 (high)     0x00000000 0x00000000
0xC4: Wakeup frame 0 CRC                          0x0000
0xC6: Wakeup frame 1 CRC                          0x0000
0xC8: Wakeup frame 2 CRC                          0x0000
0xCA: Wakeup frame 3 CRC                          0x0000
0xCC: Wakeup frame 4 CRC                          0x0000
0xDA: RX packet maximum size                      0x4000
0xE0: C+ Command                                  0x20a1
      RX checksumming
0xE2: Interrupt Mitigation                        0x5151
      TxTimer:       5
      TxPackets:     1
      RxTimer:       5
      RxPackets:     1
0xE4: Rx Ring Addr                 0xcb800000 0x00000000
0xEC: Early Tx threshold                            0x3f
0xF0: Func Event                              0x000000ff
0xF4: Func Event Mask                         0x00000000
0xF8: Func Preset State                       0x0003ffff
0xFC: Func Force Event                        0x00000000


ethtool after resume
====================
RealTek RTL8168e/8111e registers:
--------------------------------------------------------
0x00: MAC Address                      48:5b:39:c9:ec:73
0x08: Multicast Address Filter     0xffffffff 0xffffffff
0x10: Dump Tally Counter Command   0xb3a479c0 0xe2ece169
0x20: Tx Normal Priority Ring Addr 0xcb818000 0x00000000
0x28: Tx High Priority Ring Addr   0xf740e900 0xc346a1a9
0x30: Flash memory read/write                 0x00000000
0x34: Early Rx Byte Count                              0
0x36: Early Rx Status                               0x00
0x37: Command                                       0x0c
      Rx on, Tx on
0x3C: Interrupt Mask                              0x803f
      SERR LinkChg RxNoBuf TxErr TxOK RxErr RxOK 
0x3E: Interrupt Status                            0x0000
      
0x40: Tx Configuration                        0x2f100700
0x44: Rx Configuration                        0x0002070f
0x48: Timer count                             0x5369f3a2
0x4C: Missed packet counter                     0x69f44e
0x50: EEPROM Command                                0x00
0x51: Config 0                                      0x04
0x52: Config 1                                      0xcf
0x53: Config 2                                      0x3d
0x54: Config 3                                      0x62
0x55: Config 4                                      0x55
0x56: Config 5                                      0x02
0x58: Timer interrupt                         0x00000000
0x5C: Multiple Interrupt Select                   0x0000
0x60: PHY access                              0x80001000
0x64: TBI control and status                  0x27ffff01
0x68: TBI Autonegotiation advertisement (ANAR)    0xf70c
0x6A: TBI Link partner ability (LPAR)             0x0000
0x6C: PHY status                                    0x93
0x84: PM wakeup frame 0            0x00000000 0x5369fe5c
0x8C: PM wakeup frame 1            0x00000000 0xe5a07be8
0x94: PM wakeup frame 2 (low)      0xf17a89a9 0x33e576f9
0x9C: PM wakeup frame 2 (high)     0xf760d3c8 0x834cf908
0xA4: PM wakeup frame 3 (low)      0xe202c8c9 0xf16fe3f9
0xAC: PM wakeup frame 3 (high)     0xf064f869 0x00000000
0xB4: PM wakeup frame 4 (low)      0x00000000 0x00000000
0xBC: PM wakeup frame 4 (high)     0x00000000 0x00000000
0xC4: Wakeup frame 0 CRC                          0x0000
0xC6: Wakeup frame 1 CRC                          0x0000
0xC8: Wakeup frame 2 CRC                          0x0000
0xCA: Wakeup frame 3 CRC                          0x0000
0xCC: Wakeup frame 4 CRC                          0x0000
0xDA: RX packet maximum size                      0x4000
0xE0: C+ Command                                  0x20a1
      RX checksumming
0xE2: Interrupt Mitigation                        0x5151
      TxTimer:       5
      TxPackets:     1
      RxTimer:       5
      RxPackets:     1
0xE4: Rx Ring Addr                 0xcb800000 0x00000000
0xEC: Early Tx threshold                            0x3f
0xF0: Func Event                              0x000000ff
0xF4: Func Event Mask                         0x00000000
0xF8: Func Preset State                       0x0003ffff
0xFC: Func Force Event                        0x00000000


-- 
9FED 5C6C E206 B70A 5857  70CA 9655 22B9 D49A E731
Debian Developer | Lisp Hacker | CaCert Assurer


-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/87egwice1p....@anonymous.siccegge.de

Reply via email to