Package: src:linux Version: 3.16.3-2 Severity: normal Dear Maintainer,
with Kernel 3.16, intel_idle is enabled for the Intel Atom S1260 CPU (Centerton SoC). This leads to a +20°C temperature increase when the CPU is idle, exceeding the 100°C alarm threshold for passive cooled systems like the Supermicro X9SBAA-F. With 3.14, intel_idle was blacklisted for this CPU, which runs fine. If 3.16 is booted with intel_idle.max_cstate=0 processor.max_cstate=0, which disables the intel_idle, the CPU also stays cool. -- Package-specific info: ** Version: Linux version 3.16-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-11) ) #1 SMP Debian 3.16.3-2 (2014-09-20) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.16-2-amd64 root=UUID=7b7b22dd-1baa-4772-a734-03ffc40db914 ro quiet console=ttyS1,115200n8 console=tty0 intel_idle.max_cstate=0 processor.max_cstate=0 ** Not tainted ** Kernel log: [ 2.983325] ata8.00: configured for UDMA/66 [ 2.983820] ata3.00: ATA-8: ST2000DL003-9VT166, CC3C, max UDMA/133 [ 2.983825] ata3.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 2.984577] ata3.00: configured for UDMA/133 [ 3.011761] usb 1-4: New USB device found, idVendor=0557, idProduct=2221 [ 3.011767] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.011771] usb 1-4: Product: Hermon USB hidmouse Device [ 3.011776] usb 1-4: Manufacturer: Winbond Electronics Corp [ 3.012035] usb 1-4: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.012046] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes [ 3.019168] hidraw: raw HID events driver (C) Jiri Kosina [ 3.030160] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.030313] ata1.00: ATA-7: MARVELL Raid VD, MV.R00-0, max UDMA7 [ 3.030321] ata1.00: 3906865280 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 3.030471] ata1.00: configured for UDMA/133 [ 3.030722] scsi 0:0:0:0: Direct-Access ATA MARVELL Raid VD 00-0 PQ: 0 ANSI: 5 [ 3.031345] usbcore: registered new interface driver usbhid [ 3.031351] usbhid: USB HID core driver [ 3.031737] scsi 2:0:0:0: Direct-Access ATA ST2000DL003-9VT1 CC3C PQ: 0 ANSI: 5 [ 3.032928] scsi 7:0:0:0: Processor Marvell Console 1.01 PQ: 0 ANSI: 5 [ 3.033670] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb1/1-4/1-4:1.0/0003:0557:2221.0001/input/input0 [ 3.033959] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:02:00.0-4/input0 [ 3.034460] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:02.0/0000:02:00.0/usb1/1-4/1-4:1.1/0003:0557:2221.0002/input/input1 [ 3.034625] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:02:00.0-4/input1 [ 3.046153] ata8.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 3.053518] ata8.00: irq_stat 0x40000001 [ 3.057990] scsi 7:0:0:0: CDB: [ 3.057994] Inquiry: 12 01 00 00 ff 00 [ 3.058012] ata8.00: cmd a0/01:00:00:00:01/00:00:00:00:00/a0 tag 3 dma 16640 in [ 3.058012] res 00/00:00:00:00:00/00:00:00:00:00/00 Emask 0x3 (HSM violation) [ 3.075126] ata8: hard resetting link [ 3.401934] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.402158] ata8.00: configured for UDMA/66 [ 3.402241] ata8: EH complete [ 3.410424] scsi 0:0:0:0: Attached scsi generic sg0 type 0 [ 3.410654] scsi 2:0:0:0: Attached scsi generic sg1 type 0 [ 3.410830] scsi 7:0:0:0: Attached scsi generic sg2 type 3 [ 3.415232] sd 0:0:0:0: [sda] 3906865280 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 3.415438] sd 0:0:0:0: [sda] Write Protect is off [ 3.415446] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3.415527] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.415633] sd 2:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 3.415642] sd 2:0:0:0: [sdb] 4096-byte physical blocks [ 3.415805] sd 2:0:0:0: [sdb] Write Protect is off [ 3.415813] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 3.415884] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.460487] sdb: sdb1 sdb2 [ 3.461418] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3.478857] sda: sda1 sda2 [ 3.479827] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.726640] PM: Starting manual resume from disk [ 3.726652] PM: Hibernation image partition 8:17 present [ 3.726655] PM: Looking for hibernation image. [ 3.727413] PM: Image not found (code -22) [ 3.727417] PM: Hibernation image not present or could not be loaded. [ 3.838801] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.548055] random: nonblocking pool is initialized [ 6.069726] systemd-udevd[348]: starting version 208 [ 6.604812] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 6.621429] ACPI: processor limited to max C-state 0 [ 6.626403] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2 [ 6.626417] ACPI: Power Button [PWRB] [ 6.715825] ipmi message handler version 39.2 [ 6.870470] ismt_smbus 0000:00:13.0: enabling device (0140 -> 0142) [ 6.870874] ismt_smbus 0000:00:13.0: irq 68 for MSI/MSI-X [ 6.871180] ismt_smbus 0000:00:13.1: enabling device (0140 -> 0142) [ 6.871507] ismt_smbus 0000:00:13.1: irq 69 for MSI/MSI-X [ 6.873234] IPMI System Interface driver. [ 6.873371] ipmi_si: probing via ACPI [ 6.873452] ipmi_si 00:06: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 6.873459] ipmi_si: Adding ACPI-specified kcs state machine [ 6.873520] ipmi_si: probing via SMBIOS [ 6.873527] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 6.873530] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface [ 6.873538] ipmi_si: probing via SPMI [ 6.873543] ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0 [ 6.873546] ipmi_si: Adding SPMI-specified kcs state machine duplicate interface [ 6.873554] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 [ 6.912088] EFI Variables Facility v0.08 2004-May-17 [ 7.017131] ipmi_si 00:06: Found new BMC (man_id: 0x002a7c, prod_id: 0x0651, dev_id: 0x20) [ 7.017168] ipmi_si 00:06: IPMI kcs interface initialized [ 7.079210] kvm: disabled by bios [ 7.113730] kvm: disabled by bios [ 7.207631] [drm] Initialized drm 1.1.0 20060810 [ 38.813195] Adding 8388604k swap on /dev/sdb1. Priority:-1 extents:1 across:8388604k FS [ 38.882522] EXT4-fs (sda2): re-mounted. Opts: (null) [ 39.249950] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 40.279552] ipmi device interface [ 40.346725] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 40.347523] IPMI poweroff: ATCA Detect mfg 0x2A7C prod 0x651 [ 40.347529] IPMI poweroff: Found a chassis style poweroff function [ 40.417866] IPMI Watchdog: Unable to register misc device [ 40.424022] IPMI Watchdog: set timeout error: -22 [ 40.424033] IPMI Watchdog: driver initialized [ 40.655854] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 40.758328] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: errors=remount-ro [ 42.304336] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 45.678974] igb 0000:05:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 45.679142] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 66.125526] perf interrupt took too long (2517 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 ** Model information sys_vendor: Supermicro product_name: X9SBAA product_version: 0123456789 chassis_vendor: Supermicro chassis_version: 0123456789 bios_vendor: American Megatrends Inc. bios_version: 1.1 board_vendor: Supermicro board_name: X9SBAA board_version: 0123456789 ** Loaded modules: msr cpufreq_userspace cpufreq_stats cpufreq_conservative cpufreq_powersave nls_utf8 nls_cp437 vfat fat ipmi_watchdog ipmi_poweroff ipmi_devintf ttm drm_kms_helper i2c_isch drm efi_pstore coretemp ie6xx_wdt evdev lpc_sch kvm mfd_core efivars ipmi_si tpm_tis i2c_ismt ipmi_msghandler tpm acpi_cpufreq button processor shpchp ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic sg crct10dif_common hid_generic usbhid hid ahci libahci xhci_hcd igb i2c_algo_bit i2c_core dca ptp pps_core libata usbcore usb_common scsi_mod thermal thermal_sys ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor S1200 Internal [8086:0c75] (rev 02) Subsystem: Intel Corporation Device [8086:0000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 1 [8086:0c46] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at fe460000 (64-bit, non-prefetchable) [size=128K] Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fe300000-fe3fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 2 [8086:0c47] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at fe440000 (64-bit, non-prefetchable) [size=128K] Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Memory behind bridge: fe200000-fe2fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:03.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 3 [8086:0c48] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at fe420000 (64-bit, non-prefetchable) [size=128K] Bus: primary=00, secondary=03, subordinate=04, sec-latency=0 Memory behind bridge: fd800000-fe0fffff Prefetchable memory behind bridge: 00000000fc000000-00000000fcffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:04.0 PCI bridge [0604]: Intel Corporation Atom Processor S1200 PCI Express Root Port 4 [8086:0c49] (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Region 0: Memory at fe400000 (64-bit, non-prefetchable) [size=128K] Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: fe100000-fe1fffff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:0e.0 IOMMU [0806]: Intel Corporation Atom Processor S1200 Internal [8086:0c54] (rev 02) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 5 Capabilities: <access denied> 00:13.0 System peripheral [0880]: Intel Corporation Atom Processor S1200 SMBus 2.0 Controller 0 [8086:0c59] (rev 02) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 68 Region 0: Memory at fe482000 (64-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ismt_smbus 00:13.1 System peripheral [0880]: Intel Corporation Atom Processor S1200 SMBus 2.0 Controller 1 [8086:0c5a] (rev 02) Subsystem: Intel Corporation Device [8086:0000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 69 Region 0: Memory at fe481000 (64-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ismt_smbus 00:14.0 Serial controller [0700]: Intel Corporation Atom Processor S1200 UART [8086:0c5f] (rev 02) (prog-if 02 [16550]) Subsystem: Super Micro Computer Inc Device [15d9:0651] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at f000 [size=8] Region 1: Memory at fe480000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: serial 00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor S1200 Integrated Legacy Bus [8086:0c60] (rev 02) Subsystem: Super Micro Computer Inc Device [15d9:0651] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: lpc_sch 01:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230] (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller [1b4b:9230] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 53 Region 0: I/O ports at e050 [size=8] Region 1: I/O ports at e040 [size=4] Region 2: I/O ports at e030 [size=8] Region 3: I/O ports at e020 [size=4] Region 4: I/O ports at e000 [size=32] Region 5: Memory at fe310000 (32-bit, non-prefetchable) [size=2K] Expansion ROM at fe300000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ahci 02:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller [1912:0014] (rev 03) (prog-if 30 [XHCI]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at fe200000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 03:00.0 PCI bridge [0604]: Tundra Semiconductor Corp. Device [10e3:8113] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=03, secondary=04, subordinate=04, sec-latency=64 Memory behind bridge: fd800000-fe0fffff Prefetchable memory behind bridge: 00000000fc000000-00000000fcffffff Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 04:03.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at fc000000 (32-bit, prefetchable) [size=16M] Region 1: Memory at fe000000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at fd800000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 05:00.0 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) Subsystem: Super Micro Computer Inc Device [15d9:1521] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 21 Region 0: Memory at fe120000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at d020 [size=32] Region 3: Memory at fe144000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb 05:00.1 Ethernet controller [0200]: Intel Corporation I350 Gigabit Network Connection [8086:1521] (rev 01) Subsystem: Super Micro Computer Inc Device [15d9:1521] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 22 Region 0: Memory at fe100000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at d000 [size=32] Region 3: Memory at fe140000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: igb ** USB devices: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd Winbond Hermon Bus 001 Device 002: ID 04fa:2490 Dallas Semiconductor DS1490F 2-in-1 Fob, 1-Wire adapter Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.16-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.16-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.53 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-3 ii linux-base 3.5 ii module-init-tools 18-3 Versions of packages linux-image-3.16-2-amd64 recommends: ii firmware-linux-free 3.3 Versions of packages linux-image-3.16-2-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | extlinux | lilo <none> pn linux-doc-3.16 <none> Versions of packages linux-image-3.16-2-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20140929095709.3255.93208.report...@izoard.lan