Package: src:linux
Version: 3.16.3-2
Severity: normal
Dear Maintainer,
>From the Debian linux kernel 3.16 (all versions in Jessie and Sid), I have a
>high CPU load.
With a fresh install of Debian Jessie (testing), this load is still present.
With a non Debian kernel, this issue is not present.
Also tested with the new version of the Linux Kernel, linux-image-3.17-1-amd64
(in Experimental), and I have the same problem.
Tested on several machines (Zotac ZBOX IQ01, Dell Latitude E6520).
CPU model :
Intel(R) Core(TM) i7-4770T CPU @ 2.50GHz
top :
top - 15:03:26 up 1:44, 2 users, load average: 1.00, 1.00, 0.96
Tasks: 146 total, 1 running, 145 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 0.0 sy, 0.0 ni,100.0 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem: 16165792 total, 338108 used, 15827684 free, 19292 buffers
KiB Swap: 4395004 total, 0 used, 4395004 free. 143788 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 20 0 28632 5064 3192 S 0.0 0.0 0:00.54 systemd
2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd
3 root 20 0 0 0 0 S 0.0 0.0 0:00.02 ksoftirqd/0
5 root 0 -20 0 0 0 S 0.0 0.0 0:00.00
kworker/0:0H
7 root 20 0 0 0 0 S 0.0 0.0 0:00.18 rcu_sched
8 root 20 0 0 0 0 S 0.0 0.0 0:00.00 rcu_bh
9 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
10 root rt 0 0 0 0 S 0.0 0.0 0:00.01 watchdog/0
11 root rt 0 0 0 0 S 0.0 0.0 0:00.01 watchdog/1
12 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
13 root 20 0 0 0 0 S 0.0 0.0 0:00.09 ksoftirqd/1
15 root 0 -20 0 0 0 S 0.0 0.0 0:00.00
kworker/1:0H
16 root rt 0 0 0 0 S 0.0 0.0 0:00.01 watchdog/2
17 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/2
18 root 20 0 0 0 0 S 0.0 0.0 0:00.02 ksoftirqd/2
20 root 0 -20 0 0 0 S 0.0 0.0 0:00.00
kworker/2:0H
21 root rt 0 0 0 0 S 0.0 0.0 0:00.01 watchdog/3
22 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/3
23 root 20 0 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/3
25 root 0 -20 0 0 0 S 0.0 0.0 0:00.00
kworker/3:0H
26 root rt 0 0 0 0 S 0.0 0.0 0:00.01 watchdog/4
27 root rt 0 0 0 0 S 0.0 0.0 0:00.04 migration/4
28 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/4
29 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/4:0
30 root 0 -20 0 0 0 S 0.0 0.0 0:00.00
kworker/4:0H
31 root rt 0 0 0 0 S 0.0 0.0 0:00.01 watchdog/5
32 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/5
33 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/5
35 root 0 -20 0 0 0 S 0.0 0.0 0:00.00
kworker/5:0H
36 root rt 0 0 0 0 S 0.0 0.0 0:00.01 watchdog/6
37 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/6
38 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/6
40 root 0 -20 0 0 0 S 0.0 0.0 0:00.00
kworker/6:0H
41 root rt 0 0 0 0 S 0.0 0.0 0:00.01 watchdog/7
42 root rt 0 0 0 0 S 0.0 0.0 0:00.00 migration/7
43 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/7
45 root 0 -20 0 0 0 S 0.0 0.0 0:00.00
kworker/7:0H
46 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper
47 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdevtmpfs
48 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 netns
49 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khungtaskd
50 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 writeback
51 root 25 5 0 0 0 S 0.0 0.0 0:00.00 ksmd
52 root 39 19 0 0 0 S 0.0 0.0 0:00.00 khugepaged
53 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 crypto
54 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kintegrityd
55 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 bioset
56 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 kblockd
58 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kswapd0
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: ZOTAC
product_name: ZBOX-ID92/ZBOX-IQ01
product_version: XX
chassis_vendor: To Be Filled By O.E.M.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: B220P007
board_vendor: ZOTAC
board_name: ZBOX-ID92/ZBOX-IQ01
board_version: XX
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet static
address 192.168.1.11
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
# dns-* options are implemented by the resolvconf package, if installed
dns-nameservers 192.168.1.1
dns-search fardel.local
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM
Controller [8086:0c00] (rev 06)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:b220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th
Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if
00 [VGA controller])
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:b220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 36
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core
Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:b220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 37
Region 0: Memory at f7d14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:b220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 32
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series
Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:b220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 34
Region 0: Memory at f7d1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:b220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7d1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset
High Definition Audio Controller [8086:8c20] (rev 05)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:b220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 35
Region 0: Memory at f7d10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #4 [8086:8c16] (rev d5) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #5 [8086:8c18] (rev d5) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset
Family PCI Express Root Port #6 [8086:8c1a] (rev d5) (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset
Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:b220]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation H87 Express LPC Controller
[8086:8c4a] (rev 05)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:b220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset
Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01
[AHCI 1.0])
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:b220]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 33
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7d1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family
SMBus Controller [8086:8c22] (rev 05)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:b220]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7d19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 07)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f0104000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0100000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 07)
Subsystem: ZOTAC International (MCO) Ltd. Device [19da:8168]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: I/O ports at d000 [size=256]
Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
04:00.0 Network controller [0280]: Intel Corporation Wireless 3160 [8086:08b3]
(rev 83)
Subsystem: Intel Corporation Dual Band Wireless-AC 3160 [8086:0070]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
** USB devices:
not available
-- System Information:
Debian Release: jessie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.17-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=fr_CH.UTF-8, LC_CTYPE=fr_CH.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.16-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.53
ii initramfs-tools [linux-initramfs-tool] 0.118
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16-2-amd64 recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.16-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-15
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16-2-amd64/postinst/depmod-error-initrd-3.16-2-amd64: false
linux-image-3.16-2-amd64/postinst/mips-initrd-3.16-2-amd64:
linux-image-3.16-2-amd64/prerm/removing-running-kernel-3.16-2-amd64: true
--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive:
https://lists.debian.org/20141017131659.1157.55257.reportbug@zozo.fardel.local
