Package: src:linux Version: 3.16.7-2 Severity: normal Hello,
as reported on d-d [1] after upgrading from * wheezy with * sysvinit and * linux-image-3.16-0.bpo.3-amd64 to: * jessie with * systemd and * linux-image-3.16.0-4-amd64 my system stopped being automatically able to make an attached smartphone's USB storage visible under /dev/sd*. What I do (and habe been doing in the past) is: attach the smartphone via USB to the laptop. On the smartphone a dialog pops up, that asks me how I want to make the smartphone visible to the laptop: as 'MTD', as 'installer' or as 'storage'. I select 'storage'. Normally at that point, the device would become visible as /dev/sdb. However with linux-image-3.16.0-4-amd64 it doesn't appear under /dev any more. I've tried to switch the USB device's mode's manually with usb_modeswitch, but allthough usb_modeswitch reports success issuing the command and getting an answer back from the device, it doesn't have any impact on making the device available as /dev/sd*. The only way I've found to make the device available as /dev/sdb is to reload the usb_storage module like this: rmmod usb_storage && modprobe usb_storage Here's an extract from /var/log/messages. First I attach the smartphone to the laptop's usb plug: Nov 27 13:46:41 hier kernel: [28652.975203] usb 4-1.1: new high-speed USB device number 26 using ehci-pci Nov 27 13:46:41 hier kernel: [28653.068821] usb 4-1.1: New USB device found, idVendor=12d1, idProduct=1037 Nov 27 13:46:41 hier kernel: [28653.068831] usb 4-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 Nov 27 13:46:41 hier kernel: [28653.068836] usb 4-1.1: Product: Android Nov 27 13:46:41 hier kernel: [28653.068840] usb 4-1.1: Manufacturer: Android Nov 27 13:46:41 hier kernel: [28653.068844] usb 4-1.1: SerialNumber: 4C8BEFBC3276 Nov 27 13:46:41 hier kernel: [28653.069822] usb-storage 4-1.1:1.0: USB Mass Storage device detected Nov 27 13:46:41 hier kernel: [28653.070344] scsi15 : usb-storage 4-1.1:1.0 Nov 27 13:46:41 hier mtp-probe: checking bus 4, device 26: "/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1" Nov 27 13:46:41 hier mtp-probe: bus: 4, device: 26 was not an MTP device Nov 27 13:46:42 hier usb_modeswitch: switch device 12d1:1037 on 004/026 Nothing more happens in the log. The device is not visible as /dev/sdb. Now I do a rmmod usb_storage && modprobe usb_storage at which point /var/log/messages continues like this: Nov 27 13:46:55 hier kernel: [28666.858764] usbcore: deregistering interface driver usb-storage Nov 27 13:47:01 hier kernel: [28672.635113] usb-storage 4-1.1:1.0: USB Mass Storage device detected Nov 27 13:47:01 hier kernel: [28672.635615] scsi16 : usb-storage 4-1.1:1.0 Nov 27 13:47:01 hier kernel: [28672.635915] usbcore: registered new interface driver usb-storage Nov 27 13:47:02 hier kernel: [28673.633832] scsi 16:0:0:0: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 Nov 27 13:47:02 hier kernel: [28673.634382] scsi 16:0:0:1: Direct-Access Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 Nov 27 13:47:02 hier kernel: [28673.634813] scsi 16:0:0:2: CD-ROM Linux File-CD Gadget 0000 PQ: 0 ANSI: 2 Nov 27 13:47:02 hier kernel: [28673.636127] sd 16:0:0:0: Attached scsi generic sg2 type 0 Nov 27 13:47:02 hier kernel: [28673.636856] sd 16:0:0:1: Attached scsi generic sg3 type 0 Nov 27 13:47:02 hier kernel: [28673.637294] sd 16:0:0:0: [sdb] Attached SCSI removable disk Nov 27 13:47:02 hier kernel: [28673.640180] sr1: scsi3-mmc drive: 0x/0x caddy Nov 27 13:47:02 hier kernel: [28673.641721] sr 16:0:0:2: Attached scsi generic sg4 type 5 Nov 27 13:47:02 hier kernel: [28673.642690] sd 16:0:0:1: [sdc] Attached SCSI removable disk Nov 27 13:47:11 hier kernel: [28682.358352] sd 16:0:0:0: [sdb] 2310144 512-byte logical blocks: (1.18 GB/1.10 GiB) Nov 27 13:47:11 hier kernel: [28682.363018] sdb: Nov 27 13:47:13 hier kernel: [28684.404459] sd 16:0:0:1: [sdc] 62333952 512-byte logical blocks: (31.9 GB/29.7 GiB) Nov 27 13:47:13 hier kernel: [28684.411152] sdc: sdc1 Nov 27 13:47:23 hier kernel: [28695.050516] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! Nov 27 13:47:23 hier kernel: [28695.075737] FAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. Now the smartphone's storage is visible as /dev/sdb and /dev/sdc (the smartphone's internal and external storage cards). The smartphone is a Huawei G510-0100. Thanks, *t [1] https://lists.debian.org/debian-devel/2014/11/msg01220.html -- Package-specific info: ** Version: Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-13) ) #1 SMP Debian 3.16.7-2 (2014-11-06) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=14178330-c36b-4587-8c2b-d59727c55d72 ro quiet acpi_backlight=vendor ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: ** Model information sys_vendor: Hewlett-Packard product_name: HP Pavilion dv7 Notebook PC product_version: 058D110000244620001620100 chassis_vendor: Hewlett-Packard chassis_version: Chassis Version bios_vendor: Hewlett-Packard bios_version: F.1A board_vendor: Hewlett-Packard board_name: 1659 board_version: 10.31 ** Loaded modules: dm_crypt dm_mod ctr ccm ecb btusb rfcomm bnep bluetooth 6lowpan_iphc pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) binfmt_misc uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media x86_pkg_temp_thermal intel_powerclamp intel_rapl coretemp kvm_intel kvm crc32_pclmul ghash_clmulni_intel aesni_intel aes_x86_64 arc4 rt2800pci rt2800mmio rt2800lib rt2x00pci rt2x00mmio lrw snd_hda_codec_hdmi rt2x00lib eeprom_93cx6 mac80211 radeon gf128mul snd_hda_codec_idt snd_hda_codec_generic i915 cfg80211 glue_helper ablk_helper snd_hda_intel snd_hda_controller cryptd ttm iTCO_wdt iTCO_vendor_support joydev rtsx_pci_ms memstick snd_hda_codec snd_hwdep snd_pcm drm_kms_helper drm crc_ccitt hp_wmi sparse_keymap snd_timer rfkill i2c_algo_bit i2c_i801 snd mei_me soundcore hp_accel shpchp i2c_core mei video lis3lv02d evdev lpc_ich psmouse input_polldev serio_raw processor pcspkr ac wmi button battery sch_fq_codel loop fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sg sd_mod sr_mod crc_t10dif cdrom crct10dif_generic rtsx_pci_sdmmc mmc_core ahci libahci crct10dif_pclmul crct10dif_common crc32c_intel libata ehci_pci xhci_hcd ehci_hcd scsi_mod rtsx_pci mfd_core r8169 mii usbcore usb_common thermal thermal_sys ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port [8086:0101] (rev 09) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=06, sec-latency=0 I/O behind bridge: 00005000-00005fff Memory behind bridge: c6500000-c74fffff Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 54 Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at 6000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 43 Region 0: Memory at c7504000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> Kernel driver in use: mei_me 00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at c750a000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 53 Region 0: Memory at c7500000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=0c, sec-latency=0 I/O behind bridge: 00004000-00004fff Memory behind bridge: c5500000-c64fffff Prefetchable memory behind bridge: 00000000c0400000-00000000c13fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=12, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: c4500000-c54fffff Prefetchable memory behind bridge: 00000000c1400000-00000000c23fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 [8086:1c14] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=13, subordinate=18, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: c3500000-c44fffff Prefetchable memory behind bridge: 00000000c2400000-00000000c33fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=19, subordinate=19, sec-latency=0 Memory behind bridge: c3400000-c34fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 20 Region 0: Memory at c7509000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1f.0 ISA bridge [0601]: Intel Corporation HM65 Express Chipset Family LPC Controller [8086:1c49] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 51 Region 0: I/O ports at 6088 [size=8] Region 1: I/O ports at 609c [size=4] Region 2: I/O ports at 6080 [size=8] Region 3: I/O ports at 6098 [size=4] Region 4: I/O ports at 6060 [size=32] Region 5: Memory at c7508000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 19 Region 0: Memory at c7506000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 6040 [size=32] 01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series] [1002:6760] (rev ff) (prog-if ff) !!! Unknown header type 7f Kernel driver in use: radeon 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 41 Region 0: I/O ports at 4000 [size=256] Region 2: Memory at c0404000 (64-bit, prefetchable) [size=4K] Region 4: Memory at c0400000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 0d:00.0 Network controller [0280]: Ralink corp. RT5390 [802.11 b/g/n 1T1R G-band PCI Express Single Chip] [1814:539f] Subsystem: Hewlett-Packard Company Pavilion DM1Z-3000 PCIe wireless card [103c:1637] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at c4500000 (32-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: rt2800pci 13:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 42 Region 0: Memory at c3500000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at c3510000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: rtsx_pci 19:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device [103c:1659] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at c3400000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd ** USB devices: Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 064e:e258 Suyin Corp. HP TrueVision HD Integrated Webcam Bus 001 Device 003: ID 138a:0018 Validity Sensors, Inc. Fingerprint scanner Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: jessie/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores) Locale: LANG=de_CH.utf8, LC_CTYPE=de_CH.utf8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.16.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.54 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-3 ii linux-base 3.5 ii module-init-tools 18-3 Versions of packages linux-image-3.16.0-4-amd64 recommends: ii firmware-linux-free 3.3 ii irqbalance 1.0.6-3 Versions of packages linux-image-3.16.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-15 ii linux-doc-3.16 3.16.7-2 Versions of packages linux-image-3.16.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> ii firmware-ralink 0.43 ii firmware-realtek 0.43 pn xen-hypervisor <none> -- debconf information: linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64: -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/20141203083516.11599.6797.reportbug@hier