Package: src:linux Version: 3.16.7-ckt4-2 Severity: normal Dear Maintainer,
After a clean boot everything is OK, but as soon as I reboot a domU for the first time, I start getting these lines in dmesg: xen:balloon: reserve_additional_memory: add_memory() failed: -17 And they keep repeating forever, quite frequently. This seems to have been fixed in ubuntu: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1304001 https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=3dcf63677d4eb7fdfc13290c8558c301d2588fe8 # xl dmesg (XEN) Xen version 4.4.1 (Debian 4.4.1-6) (wa...@debian.org) (gcc (Debian 4.9.2-5) 4.9.2) debug=n Thu Dec 11 14:57:34 UTC 2014 (XEN) Bootloader: GRUB 2.02~beta2-20 (XEN) Command line: placeholder dom0_mem=768M,max:768M ucode=scan And I have autoballoon="off" in /etc/xen/xl.conf -- Package-specific info: ** Version: Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-2 (2015-01-27) ** Command line: placeholder root=/dev/mapper/rvg0-dom0_80_rootfs ro quiet ** Not tainted ** Kernel log: [ 46.806552] device vif4.1 entered promiscuous mode [ 46.806719] device vif4.0 entered promiscuous mode [ 46.808018] IPv6: ADDRCONF(NETDEV_UP): vif4.1: link is not ready [ 46.808201] IPv6: ADDRCONF(NETDEV_UP): vif4.0: link is not ready [ 48.080581] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 48.096044] xen-blkback:ring-ref 9, event-channel 16, protocol 1 (x86_64-abi) persistent grants [ 48.104120] xen-blkback:ring-ref 10, event-channel 17, protocol 1 (x86_64-abi) persistent grants [ 48.111257] xen-blkback:ring-ref 11, event-channel 18, protocol 1 (x86_64-abi) persistent grants [ 48.131462] vif vif-4-0 vif4.0: Guest Rx ready [ 48.131495] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready [ 48.131532] breth1: port 4(vif4.0) entered forwarding state [ 48.131535] breth1: port 4(vif4.0) entered forwarding state [ 48.136706] vif vif-4-1 vif4.1: Guest Rx ready [ 48.136734] IPv6: ADDRCONF(NETDEV_CHANGE): vif4.1: link becomes ready [ 48.136753] breth0: port 5(vif4.1) entered forwarding state [ 48.136756] breth0: port 5(vif4.1) entered forwarding state [ 52.524439] device vif5.0 entered promiscuous mode [ 52.526017] IPv6: ADDRCONF(NETDEV_UP): vif5.0: link is not ready [ 52.810327] xen-blkback:ring-ref 8, event-channel 8, protocol 2 (x86_32-abi) [ 52.820391] xen-blkback:ring-ref 9, event-channel 9, protocol 2 (x86_32-abi) [ 52.832214] vif vif-5-0 vif5.0: Guest Rx ready [ 52.832257] IPv6: ADDRCONF(NETDEV_CHANGE): vif5.0: link becomes ready [ 52.832304] breth0: port 6(vif5.0) entered forwarding state [ 52.832308] breth0: port 6(vif5.0) entered forwarding state [ 58.840587] device vif6.0 entered promiscuous mode [ 58.842141] IPv6: ADDRCONF(NETDEV_UP): vif6.0: link is not ready [ 58.842798] device vif6.1 entered promiscuous mode [ 58.844263] IPv6: ADDRCONF(NETDEV_UP): vif6.1: link is not ready [ 60.145988] vif vif-6-0 vif6.0: Guest Rx ready [ 60.146026] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready [ 60.146070] breth1: port 5(vif6.0) entered forwarding state [ 60.146074] breth1: port 5(vif6.0) entered forwarding state [ 60.147731] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 60.158149] vif vif-6-1 vif6.1: Guest Rx ready [ 60.158178] IPv6: ADDRCONF(NETDEV_CHANGE): vif6.1: link becomes ready [ 60.158199] breth0: port 7(vif6.1) entered forwarding state [ 60.158202] breth0: port 7(vif6.1) entered forwarding state [ 60.160099] xen-blkback:ring-ref 2308, event-channel 24, protocol 1 (x86_64-abi) persistent grants [ 60.173611] xen-blkback:ring-ref 2309, event-channel 25, protocol 1 (x86_64-abi) persistent grants [ 60.181874] xen-blkback:ring-ref 2310, event-channel 26, protocol 1 (x86_64-abi) persistent grants [ 65.525950] device vif7.1 entered promiscuous mode [ 65.527393] IPv6: ADDRCONF(NETDEV_UP): vif7.1: link is not ready [ 65.528520] device vif7.0 entered promiscuous mode [ 65.529955] IPv6: ADDRCONF(NETDEV_UP): vif7.0: link is not ready [ 66.770492] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 66.783509] xen-blkback:ring-ref 9, event-channel 10, protocol 1 (x86_64-abi) persistent grants [ 66.869486] vif vif-7-0 vif7.0: Guest Rx ready [ 66.869528] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.0: link becomes ready [ 66.869567] breth0: port 8(vif7.0) entered forwarding state [ 66.869571] breth0: port 8(vif7.0) entered forwarding state [ 66.872315] vif vif-7-1 vif7.1: Guest Rx ready [ 66.872341] IPv6: ADDRCONF(NETDEV_CHANGE): vif7.1: link becomes ready [ 66.872363] breth1: port 6(vif7.1) entered forwarding state [ 66.872366] breth1: port 6(vif7.1) entered forwarding state [ 71.443566] device vif8.0 entered promiscuous mode [ 71.444965] IPv6: ADDRCONF(NETDEV_UP): vif8.0: link is not ready [ 72.662385] xen-blkback:ring-ref 8, event-channel 15, protocol 1 (x86_64-abi) persistent grants [ 72.681271] xen-blkback:ring-ref 9, event-channel 16, protocol 1 (x86_64-abi) persistent grants [ 72.695030] xen-blkback:ring-ref 10, event-channel 17, protocol 1 (x86_64-abi) persistent grants [ 72.705187] xen-blkback:ring-ref 11, event-channel 18, protocol 1 (x86_64-abi) persistent grants [ 73.852666] vif vif-8-0 vif8.0: Guest Rx ready [ 73.852704] IPv6: ADDRCONF(NETDEV_CHANGE): vif8.0: link becomes ready [ 73.852749] breth0: port 9(vif8.0) entered forwarding state [ 73.852753] breth0: port 9(vif8.0) entered forwarding state [ 196.555806] breth0: port 4(vif3.1) entered disabled state [ 196.560205] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 196.573904] breth1: port 3(vif3.0) entered disabled state [ 196.574059] device vif3.0 left promiscuous mode [ 196.574069] breth1: port 3(vif3.0) entered disabled state [ 196.598453] breth0: port 4(vif3.1) entered disabled state [ 196.598597] device vif3.1 left promiscuous mode [ 196.598605] breth0: port 4(vif3.1) entered disabled state [ 198.561389] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 200.564973] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 204.556231] device vif9.0 entered promiscuous mode [ 204.557683] IPv6: ADDRCONF(NETDEV_UP): vif9.0: link is not ready [ 204.561158] device vif9.1 entered promiscuous mode [ 204.562606] IPv6: ADDRCONF(NETDEV_UP): vif9.1: link is not ready [ 204.572990] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 205.773022] xen-blkback:ring-ref 8, event-channel 9, protocol 1 (x86_64-abi) persistent grants [ 205.793823] xen-blkback:ring-ref 9, event-channel 10, protocol 1 (x86_64-abi) persistent grants [ 205.803211] xen-blkback:ring-ref 10, event-channel 11, protocol 1 (x86_64-abi) persistent grants [ 206.924312] vif vif-9-0 vif9.0: Guest Rx ready [ 206.924356] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.0: link becomes ready [ 206.924389] breth1: port 3(vif9.0) entered forwarding state [ 206.924394] breth1: port 3(vif9.0) entered forwarding state [ 206.927176] vif vif-9-1 vif9.1: Guest Rx ready [ 206.927207] IPv6: ADDRCONF(NETDEV_CHANGE): vif9.1: link becomes ready [ 206.927229] breth0: port 4(vif9.1) entered forwarding state [ 206.927233] breth0: port 4(vif9.1) entered forwarding state [ 212.589119] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 228.637252] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 260.701567] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 292.765883] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 324.830202] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 356.894507] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 388.958821] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 421.023148] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 453.087448] xen:balloon: reserve_additional_memory: add_memory() failed: -17 [ 485.151775] xen:balloon: reserve_additional_memory: add_memory() failed: -17 ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: P55A-UD4P product_version: chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: bios_vendor: Award Software International, Inc. bios_version: F13 board_vendor: Gigabyte Technology Co., Ltd. board_name: P55A-UD4P board_version: x.x ** Loaded modules: xt_physdev iptable_filter ip_tables x_tables xen_netback xen_blkback xen_gntdev xen_evtchn xenfs xen_privcmd nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc bridge stp llc it87 hwmon_vid snd_hda_codec_hdmi nouveau iTCO_wdt ppdev iTCO_vendor_support mxm_wmi snd_hda_codec_realtek snd_hda_codec_generic video ttm drm_kms_helper drm snd_hda_intel coretemp pps_ldisc i2c_algo_bit pps_core i2c_i801 pcspkr serio_raw lpc_ich i2c_core parport_pc snd_hda_controller i7core_edac mfd_core edac_core parport snd_hda_codec snd_hwdep snd_pcm snd_timer shpchp evdev wmi snd soundcore tpm_infineon tpm_tis tpm button processor thermal_sys ext4 crc16 mbcache jbd2 dm_mod ata_generic sg sr_mod cdrom sd_mod hid_generic crc_t10dif crct10dif_generic crct10dif_common usbhid hid crc32c_intel firewire_ohci firewire_core crc_itu_t r8169 mii pata_jmicron ahci libahci ehci_pci uhci_hcd xhci_hcd ehci_hcd libata megaraid_sas usbcore usb_common scsi_mod ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d131] (rev 11) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: f9000000-faffffff Prefetchable memory behind bridge: 00000000d0000000-00000000efffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:05.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 3 [8086:d13a] (rev 11) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fbb00000-fbbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> 00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b3b] (rev 06) (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 4: I/O ports at ff00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.1 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b3e] (rev 06) (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 21 Region 4: I/O ports at fe00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.2 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b3f] (rev 06) (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fd00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1a.7 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 06) (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbfff000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1b.0 Audio device [0403]: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio [8086:3b56] (rev 06) Subsystem: Gigabyte Technology Co., Ltd Device [1458:a102] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 80 Region 0: Memory at fbff8000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: cf800000-cf9fffff Prefetchable memory behind bridge: 00000000cfa00000-00000000cfbfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: fb900000-fb9fffff Prefetchable memory behind bridge: 00000000cfc00000-00000000cfdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 00009000-00009fff Memory behind bridge: fb800000-fb8fffff Prefetchable memory behind bridge: 00000000cfe00000-00000000cfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.5 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 [8086:3b4c] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00008000-00008fff Memory behind bridge: fbe00000-fbefffff Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.6 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 7 [8086:3b4e] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f0200000-f05fffff Prefetchable memory behind bridge: 00000000fbd00000-00000000fbdfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.7 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 8 [8086:3b50] (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=08, subordinate=08, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: f0600000-f09fffff Prefetchable memory behind bridge: 00000000fbc00000-00000000fbcfffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b36] (rev 06) (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 4: I/O ports at fc00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.1 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b37] (rev 06) (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 4: I/O ports at fb00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.2 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b38] (rev 06) (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin C routed to IRQ 18 Region 4: I/O ports at fa00 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.3 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB Universal Host Controller [8086:3b39] (rev 06) (prog-if 00 [UHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 16 Region 4: I/O ports at f900 [size=32] Capabilities: <access denied> Kernel driver in use: uhci_hcd 00:1d.7 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 06) (prog-if 20 [EHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at fbffe000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a6) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=09, subordinate=09, sec-latency=32 I/O behind bridge: 0000e000-0000efff Memory behind bridge: fba00000-fbafffff Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation 5 Series Chipset LPC Interface Controller [8086:3b02] (rev 06) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich 00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 06) (prog-if 01 [AHCI 1.0]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:b005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 78 Region 0: I/O ports at f800 [size=8] Region 1: I/O ports at f700 [size=4] Region 2: I/O ports at f600 [size=8] Region 3: I/O ports at f500 [size=4] Region 4: I/O ports at f400 [size=32] Region 5: Memory at fbffd000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 06) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at fbffc000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 0500 [size=32] Kernel driver in use: i801_smbus 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller]) Subsystem: eVga.com. Corp. Device [3842:1213] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 81 Region 0: Memory at f9000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at ee000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at af00 [size=128] [virtual] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nouveau 01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1) Subsystem: eVga.com. Corp. Device [3842:1213] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at faffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 02:00.0 RAID bus controller [0104]: LSI Logic / Symbios Logic MegaRAID SAS 2208 [Thunderbolt] [1000:005b] (rev 05) Subsystem: LSI Logic / Symbios Logic MegaRAID SAS 9266-4i [1000:9269] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: I/O ports at be00 [size=256] Region 1: Memory at fbbfc000 (64-bit, non-prefetchable) [size=16K] Region 3: Memory at fbb80000 (64-bit, non-prefetchable) [size=256K] [virtual] Expansion ROM at fbb00000 [disabled] [size=128K] Capabilities: <access denied> Kernel driver in use: megaraid_sas 04:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 03) (prog-if 30 [XHCI]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5007] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: Memory at fb9fe000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 05:00.0 SATA controller [0106]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 5: Memory at fb8fe000 (32-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: ahci 05:00.1 IDE interface [0101]: JMicron Technology Corp. JMB363 SATA/IDE Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO]) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:b000] Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 17 Region 0: I/O ports at 9f00 [size=8] Region 1: I/O ports at 9e00 [size=4] Region 2: I/O ports at 9d00 [size=8] Region 3: I/O ports at 9c00 [size=4] Region 4: I/O ports at 9b00 [size=16] Capabilities: <access denied> Kernel driver in use: pata_jmicron 06:00.0 SATA controller [0106]: Marvell Technology Group Ltd. 88SE9128 PCIe SATA 6 Gb/s RAID controller [1b4b:9128] (rev 11) (prog-if 01 [AHCI 1.0]) Subsystem: Gigabyte Technology Co., Ltd Device [1458:b000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 79 Region 0: I/O ports at 8f00 [size=8] Region 1: I/O ports at 8e00 [size=4] Region 2: I/O ports at 8d00 [size=8] Region 3: I/O ports at 8c00 [size=4] Region 4: I/O ports at 8b00 [size=16] Region 5: Memory at fbeff000 (32-bit, non-prefetchable) [size=2K] [virtual] Expansion ROM at fbe00000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: ahci 07:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 71 Region 0: I/O ports at de00 [size=256] Region 2: Memory at fbdff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fbdf8000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 72 Region 0: I/O ports at ce00 [size=256] Region 2: Memory at fbcff000 (64-bit, prefetchable) [size=4K] Region 4: Memory at fbcf8000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 09:07.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI]) Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:1000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fbaff000 (32-bit, non-prefetchable) [size=2K] Region 1: Memory at fbaf8000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: firewire_ohci 3f:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c51] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: i7core_edac 3f:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 3f:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04) Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ** USB devices: not available -- System Information: Debian Release: 8.0 APT prefers testing-updates APT policy: (500, 'testing-updates'), (500, 'unstable'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: sysvinit (via /sbin/init) Versions of packages linux-image-3.16.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.55 ii initramfs-tools [linux-initramfs-tool] 0.116 ii kmod 18-3 ii linux-base 3.5 Versions of packages linux-image-3.16.0-4-amd64 recommends: ii firmware-linux-free 3.3 pn irqbalance <none> Versions of packages linux-image-3.16.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-20 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.43 ii xen-hypervisor-4.4-amd64 [xen-hypervisor] 4.4.1-6 -- debconf information: linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64: linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false -- To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: https://lists.debian.org/54c867ae.3040...@gedalya.net