Package: src:linux Version: 3.2.65-1+deb7u2 Followup-For: Bug #690162 Dear Maintainer,
The logitech-djreceiver module does not recognize and disables my Logitech K400 wireless keyboard. -- Package-specific info: ** Version: Linux version 3.2.0-4-amd64 ([email protected]) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1+deb7u2 ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=07af437e-8f03-4d95-a499-c5ba36ea9110 ro quiet ** Not tainted ** Kernel log: [ 1.601593] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.601595] sd 3:0:0:0: [sdd] 58626288 512-byte logical blocks: (30.0 GB/27.9 GiB) [ 1.601629] sd 3:0:0:0: [sdd] Write Protect is off [ 1.601631] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 1.601642] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.602453] sdd: sdd1 sdd2 < sdd5 sdd6 sdd7 sdd8 > [ 1.602527] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.602561] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.602588] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 1.602619] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 1.602768] sd 3:0:0:0: [sdd] Attached SCSI disk [ 1.641443] usb 1-1: New USB device found, idVendor=8087, idProduct=8008 [ 1.641445] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.641603] hub 1-1:1.0: USB hub found [ 1.641693] hub 1-1:1.0: 6 ports detected [ 1.654085] sdc: [ 1.654197] sd 2:0:0:0: [sdc] Attached SCSI disk [ 1.657113] sda: [ 1.657203] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.659832] sdb: [ 1.659927] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.725043] Refined TSC clocksource calibration: 3491.914 MHz. [ 1.725046] Switching to clocksource tsc [ 1.753012] usb 2-1: new high-speed USB device number 2 using ehci_hcd [ 1.889231] usb 2-1: New USB device found, idVendor=8087, idProduct=8000 [ 1.889233] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.889390] hub 2-1:1.0: USB hub found [ 1.889483] hub 2-1:1.0: 6 ports detected [ 2.056755] usb 3-6: new full-speed USB device number 2 using xhci_hcd [ 2.075033] usb 3-6: New USB device found, idVendor=046d, idProduct=c52b [ 2.075034] usb 3-6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.075035] usb 3-6: Product: USB Receiver [ 2.075036] usb 3-6: Manufacturer: Logitech [ 2.077222] usbcore: registered new interface driver usbhid [ 2.077224] usbhid: USB HID core driver [ 2.079753] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-6/input2 [ 2.079996] logitech-djreceiver 0003:046D:C52B.0003: logi_dj_probe:logi_dj_recv_query_paired_devices error:-32 [ 2.080115] logitech-djreceiver: probe of 0003:046D:C52B.0003 failed with error -32 [ 2.124592] PM: Starting manual resume from disk [ 2.124594] PM: Hibernation image partition 8:53 present [ 2.124595] PM: Looking for hibernation image. [ 2.124782] PM: Image not found (code -22) [ 2.124784] PM: Hibernation image not present or could not be loaded. [ 2.130578] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null) [ 2.343810] udevd[390]: starting version 175 [ 2.377955] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.377962] ACPI: Power Button [PWRB] [ 2.378008] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.378012] ACPI: Power Button [PWRF] [ 2.378454] ACPI: Requesting acpi_cpufreq [ 2.381359] Monitor-Mwait will be used to enter C-1 state [ 2.381369] Monitor-Mwait will be used to enter C-2 state [ 2.381378] ACPI: acpi_idle registered with cpuidle [ 2.401342] iTCO_vendor_support: vendor-support=0 [ 2.402742] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07 [ 2.402812] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 2.404931] i801_smbus 0000:00:1f.3: enabling device (0001 -> 0003) [ 2.405059] ACPI: resource 0000:00:1f.3 [io 0xf040-0xf05f] conflicts with ACPI region SMBI [io 0xf040-0xf04f] [ 2.405061] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 2.412489] input: PC Speaker as /devices/platform/pcspkr/input/input2 [ 2.425505] snd_hda_intel 0000:00:03.0: irq 43 for MSI/MSI-X [ 2.425521] snd_hda_intel 0000:00:03.0: setting latency timer to 64 [ 2.430596] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 5.449888] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 6.453046] hda-intel: No response from codec, disabling MSI: last cmd=0x000f0000 [ 7.456174] hda-intel: Codec #0 probe error; disabling it... [ 8.475307] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0001 [ 8.480116] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 8.480186] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 8.787237] Adding 3905532k swap on /dev/sdd5. Priority:-1 extents:1 across:3905532k SS [ 8.790200] EXT4-fs (sdd1): re-mounted. Opts: (null) [ 8.813448] EXT4-fs (sdd1): re-mounted. Opts: errors=remount-ro [ 8.821096] loop: module loaded [ 9.008365] EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: (null) [ 9.013279] EXT4-fs (sdd8): mounted filesystem with ordered data mode. Opts: (null) [ 9.017178] EXT4-fs (sdd7): mounted filesystem with ordered data mode. Opts: (null) [ 9.165300] RPC: Registered named UNIX socket transport module. [ 9.165302] RPC: Registered udp transport module. [ 9.165303] RPC: Registered tcp transport module. [ 9.165303] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 9.168197] FS-Cache: Loaded [ 9.172489] FS-Cache: Netfs 'nfs' registered for caching [ 9.175269] Installing knfsd (copyright (C) 1996 [email protected]). [ 9.474021] Bluetooth: Core ver 2.16 [ 9.474034] NET: Registered protocol family 31 [ 9.474035] Bluetooth: HCI device and connection manager initialized [ 9.474037] Bluetooth: HCI socket layer initialized [ 9.474038] Bluetooth: L2CAP socket layer initialized [ 9.474041] Bluetooth: SCO socket layer initialized [ 9.479476] Bluetooth: RFCOMM TTY layer initialized [ 9.479479] Bluetooth: RFCOMM socket layer initialized [ 9.479481] Bluetooth: RFCOMM ver 1.11 [ 9.498706] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 9.498709] Bluetooth: BNEP filters: protocol multicast [ 9.634371] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [ 9.738268] e1000e 0000:00:19.0: irq 40 for MSI/MSI-X [ 9.738614] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.820782] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 12.821887] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.722355] eth0: no IPv6 routers present ** Model information sys_vendor: Gigabyte Technology Co., Ltd. product_name: B85N PHOENIX product_version: To be filled by O.E.M. chassis_vendor: Gigabyte Technology Co., Ltd. chassis_version: To Be Filled By O.E.M. bios_vendor: American Megatrends Inc. bios_version: F6 board_vendor: Gigabyte Technology Co., Ltd. board_name: B85N PHOENIX-CF board_version: x.x ** Loaded modules: bnep rfcomm bluetooth rfkill binfmt_misc nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop snd_hda_codec_realtek coretemp crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 aes_generic cryptd snd_hda_intel evdev snd_hda_codec snd_hwdep psmouse snd_pcm pcspkr snd_page_alloc snd_seq serio_raw snd_seq_device snd_timer i2c_i801 i2c_core iTCO_wdt snd iTCO_vendor_support acpi_cpufreq mperf soundcore video processor button ext4 crc16 jbd2 mbcache hid_logitech_dj usbhid hid sg sd_mod crc_t10dif xhci_hcd thermal fan thermal_sys ahci libahci ehci_hcd libata scsi_mod usbcore usb_common e1000e ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Haswell DRAM Controller [8086:0c00] (rev 06) Subsystem: Giga-byte Technology Device [1458:5000] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:02.0 VGA compatible controller [0300]: Intel Corporation Device [8086:041e] (rev 06) (prog-if 00 [VGA controller]) Subsystem: Giga-byte Technology Device [1458:d000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M] Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M] Region 4: I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> 00:03.0 Audio device [0403]: Intel Corporation Haswell HD Audio Controller [8086:0c0c] (rev 06) Subsystem: Intel Corporation Device [8086:2010] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7c34000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.0 USB controller [0c03]: Intel Corporation Lynx Point USB xHCI Host Controller [8086:8c31] (rev 05) (prog-if 30 [XHCI]) Subsystem: Giga-byte Technology Device [1458:5007] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at f7c20000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:16.0 Communication controller [0780]: Intel Corporation Lynx Point MEI Controller #1 [8086:8c3a] (rev 04) Subsystem: Giga-byte Technology Device [1458:1c3a] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f7c40000 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:16.3 Serial controller [0700]: Intel Corporation Lynx Point KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550]) Subsystem: Giga-byte Technology Device [1458:1c3a] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 19 Region 0: I/O ports at f0e0 [size=8] Region 1: Memory at f7c3e000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: serial 00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-V [8086:153b] (rev 05) Subsystem: Giga-byte Technology Device [1458:e000] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 40 Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f7c3d000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at f080 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e 00:1a.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced Host Controller #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at f7c3c000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1b.0 Audio device [0403]: Intel Corporation Lynx Point High Definition Audio Controller [8086:8c20] (rev 05) Subsystem: Giga-byte Technology Device [1458:a002] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f7c30000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:1d.0 USB controller [0c03]: Intel Corporation Lynx Point USB Enhanced Host Controller #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI]) Subsystem: Giga-byte Technology Device [1458:5006] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 23 Region 0: Memory at f7c3b000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point LPC Controller [8086:8c50] (rev 05) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller [0106]: Intel Corporation Lynx Point 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0]) Subsystem: Giga-byte Technology Device [1458:b005] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 41 Region 0: I/O ports at f0d0 [size=8] Region 1: I/O ports at f0c0 [size=4] Region 2: I/O ports at f0b0 [size=8] Region 3: I/O ports at f0a0 [size=4] Region 4: I/O ports at f060 [size=32] Region 5: Memory at f7c3a000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point SMBus Controller [8086:8c22] (rev 05) Subsystem: Giga-byte Technology Device [1458:5001] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin C routed to IRQ 18 Region 0: Memory at f7c39000 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at f040 [size=32] ** USB devices: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:8008 Intel Corp. Bus 002 Device 002: ID 8087:8000 Intel Corp. Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver -- System Information: Debian Release: 7.8 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages linux-image-3.2.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.49 ii initramfs-tools [linux-initramfs-tool] 0.109.1 ii kmod 9-3 ii linux-base 3.5 ii module-init-tools 9-3 Versions of packages linux-image-3.2.0-4-amd64 recommends: pn firmware-linux-free <none> Versions of packages linux-image-3.2.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 1.99-27+deb7u2 pn linux-doc-3.2 <none> Versions of packages linux-image-3.2.0-4-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk: linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: https://lists.debian.org/[email protected]
