Package: src:linux
Version: 3.16.7-ckt9-2
Severity: normal

Dear Maintainer,

My USB mouse intermittently stops working (pointer not responding to it, but responding normally to the internal trackpad); this has been happening for at least 1-2 months (possibly since install), but has been unusually frequent for the last few days.

When not working, the mouse continues to appear in lsusb and /dev/bus/usb, but sudo cat /dev/input/mouse0 gives nothing; nothing appears in kern.log. It can be made to work again by a suspend/resume or hibernate/resume cycle, or by physically disconnecting and reconnecting it.

Unlike #780923, it only ever affects the mouse, not the (also USB) keyboard.

Boot messages for this device:
Apr 20 20:01:10 rnpalmer-laptop kernel: [ 3.212600] usb 3-2: new low-speed USB device number 3 using xhci_hcd Apr 20 20:01:10 rnpalmer-laptop kernel: [ 3.380727] usb 3-2: device descriptor read/64, error -71 Apr 20 20:01:10 rnpalmer-laptop kernel: [ 3.616509] usb 3-2: New USB device found, idVendor=13ee, idProduct=0001 Apr 20 20:01:10 rnpalmer-laptop kernel: [ 3.616515] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Apr 20 20:01:10 rnpalmer-laptop kernel: [ 3.616518] usb 3-2: Product: AND Apr 20 20:01:10 rnpalmer-laptop kernel: [ 3.616521] usb 3-2: Manufacturer: MOON Apr 20 20:01:10 rnpalmer-laptop kernel: [ 3.616524] usb 3-2: SerialNumber: @ɌAB Apr 20 20:01:10 rnpalmer-laptop kernel: [ 3.616790] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes Apr 20 20:01:10 rnpalmer-laptop kernel: [ 3.619421] input: MOON AND as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:13EE:0001.0003/input/input7 Apr 20 20:01:10 rnpalmer-laptop kernel: [ 3.619602] hid-generic 0003:13EE:0001.0003: input,hidraw2: USB HID v1.00 Mouse [MOON AND ] on usb-0000:00:14.0-2/input0


$ sudo lsusb -d 13ee:0001 -v

Bus 003 Device 003: ID 13ee:0001 MosArt
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0         8
  idVendor           0x13ee MosArt
  idProduct          0x0001
  bcdDevice            0.10
  iManufacturer           1 MOON
  iProduct                2 AND
  iSerial                 3 @ɌAB
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           34
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           1
      bInterfaceClass         3 Human Interface Device
      bInterfaceSubClass      1 Boot Interface Subclass
      bInterfaceProtocol      2 Mouse
      iInterface              0
        HID Device Descriptor:
          bLength                 9
          bDescriptorType        33
          bcdHID               1.00
          bCountryCode            0 Not supported
          bNumDescriptors         1
          bDescriptorType        34 Report
          wDescriptorLength      52
         Report Descriptors:
           ** UNAVAILABLE **
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval              10
Device Status:     0x0000
  (Bus Powered)
rnpalmer@rnpalmer-laptop:~$


-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13)

** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=UUID=1ebca590-0a18-44f5-8d75-f96f5ca7c36e ro quiet

** Not tainted

** Kernel log:
[  629.323176] ehci-pci 0000:00:1a.0: using default PCI settings
[  629.323189] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  629.323196] pcieport 0000:00:1c.0: no hotplug settings from platform
[  629.323202] pcieport 0000:00:1c.1: no hotplug settings from platform
[  629.323266] ath9k 0000:02:00.0: no hotplug settings from platform
[  629.323273] pcieport 0000:00:1c.2: no hotplug settings from platform
[  629.323291] alx 0000:03:00.0: no hotplug settings from platform
[  629.323297] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  629.323300] ehci-pci 0000:00:1d.0: using default PCI settings
[  629.323315] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  629.323318] lpc_ich 0000:00:1f.0: using default PCI settings
[  629.323332] ahci 0000:00:1f.2: no hotplug settings from platform
[  629.323335] ahci 0000:00:1f.2: using default PCI settings
[  629.323348] pci 0000:00:1f.3: no hotplug settings from platform
[  629.323351] pci 0000:00:1f.3: using default PCI settings
[ 629.323385] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  629.323397] ivb_uncore 0000:00:00.0: no hotplug settings from platform
[  629.323401] ivb_uncore 0000:00:00.0: using default PCI settings
[  629.323411] i915 0000:00:02.0: no hotplug settings from platform
[  629.323414] i915 0000:00:02.0: using default PCI settings
[  629.323424] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  629.323427] xhci_hcd 0000:00:14.0: using default PCI settings
[  629.323441] mei_me 0000:00:16.0: no hotplug settings from platform
[  629.323444] mei_me 0000:00:16.0: using default PCI settings
[  629.323458] ehci-pci 0000:00:1a.0: no hotplug settings from platform
[  629.323461] ehci-pci 0000:00:1a.0: using default PCI settings
[  629.323476] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  629.323483] pcieport 0000:00:1c.0: no hotplug settings from platform
[  629.323491] pcieport 0000:00:1c.1: no hotplug settings from platform
[  629.323556] ath9k 0000:02:00.0: no hotplug settings from platform
[  629.323563] pcieport 0000:00:1c.2: no hotplug settings from platform
[  629.323581] alx 0000:03:00.0: no hotplug settings from platform
[  629.323588] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  629.323590] ehci-pci 0000:00:1d.0: using default PCI settings
[  629.323605] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  629.323609] lpc_ich 0000:00:1f.0: using default PCI settings
[  629.323626] ahci 0000:00:1f.2: no hotplug settings from platform
[  629.323635] ahci 0000:00:1f.2: using default PCI settings
[  629.323655] pci 0000:00:1f.3: no hotplug settings from platform
[  629.323664] pci 0000:00:1f.3: using default PCI settings
[  629.324003] pci_bus 0000:01: Allocating resources
[  629.324030] pci_bus 0000:02: Allocating resources
[  629.324113] pci_bus 0000:03: Allocating resources
[ 629.324140] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  629.324154] ivb_uncore 0000:00:00.0: no hotplug settings from platform
[  629.324157] ivb_uncore 0000:00:00.0: using default PCI settings
[  629.324166] i915 0000:00:02.0: no hotplug settings from platform
[  629.324170] i915 0000:00:02.0: using default PCI settings
[  629.324179] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  629.324182] xhci_hcd 0000:00:14.0: using default PCI settings
[  629.324195] mei_me 0000:00:16.0: no hotplug settings from platform
[  629.324198] mei_me 0000:00:16.0: using default PCI settings
[  629.324212] ehci-pci 0000:00:1a.0: no hotplug settings from platform
[  629.324215] ehci-pci 0000:00:1a.0: using default PCI settings
[  629.324229] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  629.324236] pcieport 0000:00:1c.0: no hotplug settings from platform
[  629.324243] pcieport 0000:00:1c.1: no hotplug settings from platform
[  629.324308] ath9k 0000:02:00.0: no hotplug settings from platform
[  629.324315] pcieport 0000:00:1c.2: no hotplug settings from platform
[  629.324334] alx 0000:03:00.0: no hotplug settings from platform
[  629.324341] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  629.324344] ehci-pci 0000:00:1d.0: using default PCI settings
[  629.324358] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  629.324363] lpc_ich 0000:00:1f.0: using default PCI settings
[  629.324378] ahci 0000:00:1f.2: no hotplug settings from platform
[  629.324381] ahci 0000:00:1f.2: using default PCI settings
[  629.324394] pci 0000:00:1f.3: no hotplug settings from platform
[  629.324397] pci 0000:00:1f.3: using default PCI settings
[ 629.324633] i915 0000:00:02.0: BAR 6: [??? 0x00000000 flags 0x2] has bogus alignment
[  629.324646] ivb_uncore 0000:00:00.0: no hotplug settings from platform
[  629.324649] ivb_uncore 0000:00:00.0: using default PCI settings
[  629.324658] i915 0000:00:02.0: no hotplug settings from platform
[  629.324661] i915 0000:00:02.0: using default PCI settings
[  629.324671] xhci_hcd 0000:00:14.0: no hotplug settings from platform
[  629.324674] xhci_hcd 0000:00:14.0: using default PCI settings
[  629.324686] mei_me 0000:00:16.0: no hotplug settings from platform
[  629.324689] mei_me 0000:00:16.0: using default PCI settings
[  629.324702] ehci-pci 0000:00:1a.0: no hotplug settings from platform
[  629.324705] ehci-pci 0000:00:1a.0: using default PCI settings
[  629.324719] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
[  629.324725] pcieport 0000:00:1c.0: no hotplug settings from platform
[  629.324732] pcieport 0000:00:1c.1: no hotplug settings from platform
[  629.324797] ath9k 0000:02:00.0: no hotplug settings from platform
[  629.324804] pcieport 0000:00:1c.2: no hotplug settings from platform
[  629.324821] alx 0000:03:00.0: no hotplug settings from platform
[  629.324828] ehci-pci 0000:00:1d.0: no hotplug settings from platform
[  629.324831] ehci-pci 0000:00:1d.0: using default PCI settings
[  629.324845] lpc_ich 0000:00:1f.0: no hotplug settings from platform
[  629.324849] lpc_ich 0000:00:1f.0: using default PCI settings
[  629.324863] ahci 0000:00:1f.2: no hotplug settings from platform
[  629.324866] ahci 0000:00:1f.2: using default PCI settings
[  629.324879] pci 0000:00:1f.3: no hotplug settings from platform
[  629.324882] pci 0000:00:1f.3: using default PCI settings
[  629.341512] alx 0000:03:00.0: irq 45 for MSI/MSI-X
[  629.341990] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  629.357586] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  629.655003] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[  629.658401] ata1.00: configured for UDMA/100
[  634.897563] alx 0000:03:00.0 eth0: NIC Up: 100 Mbps Full
[  634.898040] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

** Model information
sys_vendor: TOSHIBA
product_name: SATELLITE PRO C50-A-1E4
product_version: PSCG7E-02E042EN
chassis_vendor: OEM Chassis Manufacturer
chassis_version: OEM Chassis Version
bios_vendor: Insyde Corp.
bios_version: 1.20
board_vendor: Intel
board_name: PT10F
board_version: Type2 - Board Version

** Loaded modules:
bnep
binfmt_misc
nls_utf8
nls_cp437
vfat
fat
arc4
uvcvideo
x86_pkg_temp_thermal
ath9k
intel_powerclamp
videobuf2_vmalloc
videobuf2_memops
ath9k_common
videobuf2_core
ath9k_hw
intel_rapl
ath
mac80211
ecb
btusb
v4l2_common
coretemp
videodev
media
iTCO_wdt
iTCO_vendor_support
kvm_intel
kvm
bluetooth
joydev
6lowpan_iphc
psmouse
pcspkr
cfg80211
snd_hda_codec_hdmi
evdev
efi_pstore
i915
sparse_keymap
serio_raw
rfkill
snd_hda_codec_idt
snd_hda_codec_generic
efivars
snd_hda_intel
toshiba_bluetooth
drm_kms_helper
wmi
snd_hda_controller
snd_hda_codec
video
drm
i2c_algo_bit
mei_me
button
processor
snd_hwdep
shpchp
i2c_i801
i2c_core
mei
ac
battery
snd_pcm
lpc_ich
mfd_core
snd_timer
snd
soundcore
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
algif_skcipher
af_alg
usb_storage
dm_crypt
dm_mod
hid_generic
usbhid
hid
sg
sd_mod
sr_mod
crc_t10dif
cdrom
crct10dif_generic
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
ahci
libahci
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
libata
scsi_mod
ehci_pci
xhci_hcd
ehci_hcd
alx
mdio
usbcore
thermal
usb_common
thermal_sys

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
        Subsystem: Toshiba America Info Systems Device [1179:fa30]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: ivb_uncore

00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
        Subsystem: Toshiba America Info Systems Device [1179:fa31]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 44
        Region 0: Memory at c2000000 (64-bit, non-prefetchable) [size=4M]
        Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
        Region 4: I/O ports at 3000 [size=64]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: <access denied>
        Kernel driver in use: i915

00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
        Subsystem: Toshiba America Info Systems Device [1179:fa30]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 40
        Region 0: Memory at c2500000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
        Subsystem: Toshiba America Info Systems Device [1179:fa30]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 42
        Region 0: Memory at c2514000 (64-bit, non-prefetchable) [size=16]
        Capabilities: <access denied>
        Kernel driver in use: mei_me

00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
        Subsystem: Toshiba America Info Systems Device [1179:fa30]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at c2519000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
        Subsystem: Toshiba America Info Systems Device [1179:fa30]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 43
        Region 0: Memory at c2510000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: <access denied>
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: c2400000-c24fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=08, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: c1000000-c1ffffff
        Prefetchable memory behind bridge: 00000000c0000000-00000000c0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: <access denied>
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
        Subsystem: Toshiba America Info Systems Device [1179:fa30]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at c2518000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>
        Kernel driver in use: ehci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
        Subsystem: Toshiba America Info Systems Device [1179:fa30]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: <access denied>
        Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
        Subsystem: Toshiba America Info Systems Device [1179:fa30]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 41
        Region 0: I/O ports at 3088 [size=8]
        Region 1: I/O ports at 3094 [size=4]
        Region 2: I/O ports at 3080 [size=8]
        Region 3: I/O ports at 3090 [size=4]
        Region 4: I/O ports at 3060 [size=32]
        Region 5: Memory at c2517000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
        Subsystem: Toshiba America Info Systems Device [1179:fa30]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin C routed to IRQ 19
        Region 0: Memory at c2515000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 3040 [size=32]

02:00.0 Network controller [0280]: Qualcomm Atheros AR9462 Wireless Network Adapter [168c:0034] (rev 01)
        Subsystem: Lite-On Communications Inc Device [11ad:6611]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 17
        Region 0: Memory at c2400000 (64-bit, non-prefetchable) [size=512K]
        Expansion ROM at c2480000 [disabled] [size=64K]
        Capabilities: <access denied>
        Kernel driver in use: ath9k

03:00.0 Ethernet controller [0200]: Qualcomm Atheros QCA8171 Gigabit Ethernet [1969:10a1] (rev 10)
        Subsystem: Toshiba America Info Systems Device [1179:fa30]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at c1000000 (64-bit, non-prefetchable) [size=256K]
        Region 2: I/O ports at 2000 [size=128]
        Capabilities: <access denied>
        Kernel driver in use: alx


** USB devices:
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 005: ID 04f2:b3b1 Chicony Electronics Co., Ltd
Bus 001 Device 004: ID 07b5:0316 Mega World International, Ltd
Bus 001 Device 003: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 0930:021c Toshiba Corp.
Bus 003 Device 003: ID 13ee:0001 MosArt
Bus 003 Device 002: ID 1241:1603 Belkin Keyboard
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 8.0
  APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing'), (100, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.56
ii  initramfs-tools [linux-initramfs-tool]  0.120
ii  kmod                                    18-3
ii  linux-base                              3.5

Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.0.6-3

Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-efi                2.02~beta2-22
pn  linux-doc-3.16          <none>

Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:

linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
  linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:

linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false


--
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/553961a8.9000...@zoho.com

Reply via email to