Package: src:linux
Version: 3.2.60-1+deb7u3
Severity: normal
Tags: upstream


Sometimes when connecting an USB hard disk (USB3 2TB Western Digital, 3.5 
inches with its own power supply, connected to an USB2 port) I get this log:


[14522591.720609] ehci_hcd 0000:00:1d.0: fatal error
[14522591.724639] ehci_hcd 0000:00:1d.0: HC died; cleaning up
[14522591.727660] ehci_hcd 0000:00:1d.0: force halt; handshake ffffc900057a8024 
00004000 00004000 -> -110
[14522591.727843] ehci_hcd 0000:00:1d.0: HC died; cleaning up
[14522591.736560] usb 2-1.2: device descriptor read/all, error -108
[14522591.736708] hub 2-1:1.0: cannot disable port 2 (err = -19)
[14522591.736858] hub 2-1:1.0: cannot reset port 2 (err = -19)
[14522591.737001] hub 2-1:1.0: cannot disable port 2 (err = -19)
[14522591.737146] hub 2-1:1.0: cannot reset port 2 (err = -19)
[14522591.737289] hub 2-1:1.0: cannot disable port 2 (err = -19)
[14522591.737433] hub 2-1:1.0: cannot reset port 2 (err = -19)
[14522591.737576] hub 2-1:1.0: cannot disable port 2 (err = -19)
[14522591.737716] hub 2-1:1.0: unable to enumerate USB device on port 2
[14522591.737859] hub 2-1:1.0: cannot disable port 2 (err = -19)
[14522591.738014] usb 2-1.4: USB disconnect, device number 4
[14522591.972629] usb 2-1: USB disconnect, device number 2
[14522739.554636] ehci_hcd 0000:00:1d.0: remove, state 1
[14522739.554653] usb usb2: USB disconnect, device number 1
[14522739.558852] ehci_hcd 0000:00:1d.0: USB bus 2 deregistered
[14522739.558903] ehci_hcd 0000:00:1a.0: remove, state 1
[14522739.558918] usb usb1: USB disconnect, device number 1
[14522739.558920] usb 1-1: USB disconnect, device number 2
[14522739.558923] usb 1-1.1: USB disconnect, device number 3


After that, no usb device work unless I rmmod and then modprobe again the 
module ehci_hcd. 

This behaviour began some months ago (Maybe a kernel update, but I am not sure 
because I do not always disconnect and connect usb disks). The mainboard is an 
Intel Server board S1200BTSR. I cannot do many tests on this computer because 
it is a production server.

If the ehci driver does not crash, of after having reloaded the module after a 
crash, the USB disk works flawlessly even under intense load (rsync of 2TB of 
data). 

I have tried swapping USB cable, I have tried using a different USB port, and 
also swapping USB drive (I have 4 of them, same model and maker) to no avail. 
Issue remains.

I have googled a little and found that this behaviour is not new, it happened 
in 2.6 kernels too. I have found a bug report from RedHat that refers to issues 
after hibernation and resume, but this is not the case because this is a server 
and is never hibernated.





-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 
(Debian 4.6.3-14) ) #1 SMP Debian 3.2.60-1+deb7u3

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 
root=UUID=0193ca94-cdc0-44bf-8205-2ff864d54170 ro quiet

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[14522591.737146] hub 2-1:1.0: cannot reset port 2 (err = -19)
[14522591.737289] hub 2-1:1.0: cannot disable port 2 (err = -19)
[14522591.737433] hub 2-1:1.0: cannot reset port 2 (err = -19)
[14522591.737576] hub 2-1:1.0: cannot disable port 2 (err = -19)
[14522591.737716] hub 2-1:1.0: unable to enumerate USB device on port 2
[14522591.737859] hub 2-1:1.0: cannot disable port 2 (err = -19)
[14522591.738014] usb 2-1.4: USB disconnect, device number 4
[14522591.972629] usb 2-1: USB disconnect, device number 2
[14522739.554636] ehci_hcd 0000:00:1d.0: remove, state 1
[14522739.554653] usb usb2: USB disconnect, device number 1
[14522739.558852] ehci_hcd 0000:00:1d.0: USB bus 2 deregistered
[14522739.558903] ehci_hcd 0000:00:1a.0: remove, state 1
[14522739.558918] usb usb1: USB disconnect, device number 1
[14522739.558920] usb 1-1: USB disconnect, device number 2
[14522739.558923] usb 1-1.1: USB disconnect, device number 3
[14522739.724813] ehci_hcd 0000:00:1a.0: USB bus 1 deregistered
[14522745.683355] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[14522745.683412] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[14522745.683417] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[14522745.683449] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus 
number 1
[14522745.683473] ehci_hcd 0000:00:1a.0: debug port 2
[14522745.687352] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[14522745.687371] ehci_hcd 0000:00:1a.0: irq 22, io mem 0xc2860000
[14522745.702586] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[14522745.702628] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[14522745.702631] usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[14522745.702633] usb usb1: Product: EHCI Host Controller
[14522745.702635] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[14522745.702637] usb usb1: SerialNumber: 0000:00:1a.0
[14522745.702828] hub 1-0:1.0: USB hub found
[14522745.702833] hub 1-0:1.0: 2 ports detected
[14522745.730669] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[14522745.730676] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[14522745.730688] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 2
[14522745.730718] ehci_hcd 0000:00:1d.0: debug port 2
[14522745.734614] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[14522745.734629] ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc2850000
[14522745.746577] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[14522745.746608] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[14522745.746611] usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[14522745.746614] usb usb2: Product: EHCI Host Controller
[14522745.746617] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[14522745.746619] usb usb2: SerialNumber: 0000:00:1d.0
[14522745.746814] hub 2-0:1.0: USB hub found
[14522745.746820] hub 2-0:1.0: 2 ports detected
[14522746.014512] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[14522746.146858] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[14522746.146863] usb 1-1: New USB device strings: Mfr=0, Product=0, 
SerialNumber=0
[14522746.147174] hub 1-1:1.0: USB hub found
[14522746.147340] hub 1-1:1.0: 6 ports detected
[14522746.258475] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[14522746.390799] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[14522746.390804] usb 2-1: New USB device strings: Mfr=0, Product=0, 
SerialNumber=0
[14522746.391089] hub 2-1:1.0: USB hub found
[14522746.391167] hub 2-1:1.0: 6 ports detected
[14522746.462531] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[14522746.556262] usb 1-1.1: New USB device found, idVendor=046b, idProduct=ff10
[14522746.556267] usb 1-1.1: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[14522746.556270] usb 1-1.1: Product: Virtual Keyboard and Mouse
[14522746.556273] usb 1-1.1: Manufacturer: American Megatrends Inc.
[14522746.556275] usb 1-1.1: SerialNumber: serial
[14522746.557688] input: American Megatrends Inc. Virtual Keyboard and Mouse as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input29
[14522746.557902] generic-usb 0003:046B:FF10.0020: input,hidraw0: USB HID v1.10 
Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on 
usb-0000:00:1a.0-1.1/input0
[14522746.558888] input: American Megatrends Inc. Virtual Keyboard and Mouse as 
/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input30
[14522746.559200] generic-usb 0003:046B:FF10.0021: input,hidraw1: USB HID v1.10 
Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on 
usb-0000:00:1a.0-1.1/input1
[14522746.662490] usb 2-1.2: new high-speed USB device number 3 using ehci_hcd
[14522746.755591] usb 2-1.2: New USB device found, idVendor=18a5, idProduct=0400
[14522746.755596] usb 2-1.2: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[14522746.755599] usb 2-1.2: Product: USB 3.0 Desktop HD
[14522746.755602] usb 2-1.2: Manufacturer: Verbatim
[14522746.755604] usb 2-1.2: SerialNumber: 306219092965
[14522746.756222] scsi18 : usb-storage 2-1.2:1.0
[14522746.826452] usb 2-1.4: new low-speed USB device number 4 using ehci_hcd
[14522746.926302] usb 2-1.4: New USB device found, idVendor=04d9, idProduct=1400
[14522746.926307] usb 2-1.4: New USB device strings: Mfr=0, Product=0, 
SerialNumber=0
[14522746.932870] input: HID 04d9:1400 as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input31
[14522746.933004] generic-usb 0003:04D9:1400.0022: input,hidraw2: USB HID v1.10 
Keyboard [HID 04d9:1400] on usb-0000:00:1d.0-1.4/input0
[14522746.944906] input: HID 04d9:1400 as 
/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/input/input32
[14522746.945238] generic-usb 0003:04D9:1400.0023: input,hidraw3: USB HID v1.10 
Mouse [HID 04d9:1400] on usb-0000:00:1d.0-1.4/input1
[14522754.615491] scsi 18:0:0:0: Direct-Access     ST2000DL 003-9VT166       
CC45 PQ: 0 ANSI: 6
[14522754.617121] sd 18:0:0:0: Attached scsi generic sg0 type 0
[14522754.617964] sd 18:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 
TB/1.81 TiB)
[14522754.618830] sd 18:0:0:0: [sda] Write Protect is off
[14522754.618836] sd 18:0:0:0: [sda] Mode Sense: 1f 00 00 08
[14522754.619549] sd 18:0:0:0: [sda] No Caching mode page found
[14522754.619683] sd 18:0:0:0: [sda] Assuming drive cache: write through
[14522754.622032] sd 18:0:0:0: [sda] No Caching mode page found
[14522754.622166] sd 18:0:0:0: [sda] Assuming drive cache: write through
[14522754.625328]  sda: sda1
[14522754.627909] sd 18:0:0:0: [sda] No Caching mode page found
[14522754.628039] sd 18:0:0:0: [sda] Assuming drive cache: write through
[14522754.628172] sd 18:0:0:0: [sda] Attached SCSI disk
[14523040.820260] kjournald starting.  Commit interval 5 seconds
[14523040.820608] EXT3-fs (sda1): warning: checktime reached, running e2fsck is 
recommended
[14523040.821316] EXT3-fs (sda1): using internal journal
[14523040.821321] EXT3-fs (sda1): mounted filesystem with ordered data mode
[14523096.244264] kjournald starting.  Commit interval 5 seconds
[14523096.244571] EXT3-fs (sda1): warning: checktime reached, running e2fsck is 
recommended
[14523096.245387] EXT3-fs (sda1): using internal journal
[14523096.245392] EXT3-fs (sda1): mounted filesystem with ordered data mode

** Model information
sys_vendor: Intel Corporation
product_name: S1200BTL
product_version: ....................
chassis_vendor: To Be Filled By O.E.M.
chassis_version: ..................
bios_vendor: Intel Corp.
bios_version: S1200BT.86B.02.00.0037.053020121529
board_vendor: Intel Corporation
board_name: S1200BTL
board_version: E98681-352

** Loaded modules:
ehci_hcd
usb_storage
usbhid
ext3
jbd
ipmi_si
ipmi_devintf
ipmi_msghandler
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
loop
coretemp
snd_pcm
snd_page_alloc
snd_timer
snd
joydev
crc32c_intel
iTCO_wdt
soundcore
i2c_i801
ghash_clmulni_intel
evdev
i2c_core
iTCO_vendor_support
pcspkr
aesni_intel
aes_x86_64
aes_generic
cryptd
acpi_cpufreq
mperf
processor
button
video
ext4
crc16
jbd2
mbcache
raid1
md_mod
sg
sd_mod
crc_t10dif
hid
ahci
libahci
fan
mptsas
thermal
scsi_transport_sas
thermal_sys
mptscsih
mptbase
libata
scsi_mod
e1000e
usbcore
usb_common

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM 
Controller [8086:0158] (rev 09)
        Subsystem: Intel Corporation Device [8086:2010]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:06.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core 
processor PCI Express Root Port [8086:015d] (rev 09) (prog-if 00 [Normal 
decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: c1a00000-c1cfffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [88] Subsystem: Intel Corporation Device [8086:2010]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee002d8  Data: 0000
        Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #5, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 
<1us, L1 <8us
                        ClockPM- Surprise- LLActRep- BwNot+
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ 
DLActive- BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #529, PowerLimit 75.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet+ LinkState-
                RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna+ 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -3.5dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -6dB, 
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
        Capabilities: [140 v1] Root Complex Link
                Desc:   PortNumber=05 ComponentID=01 EltType=Config
                Link0:  Desc:   TargetPort=00 TargetComponent=01 AssocRCRB- 
LinkType=MemMapped LinkValid+
                        Addr:   00000000fed19000
        Kernel driver in use: pcieport

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network 
Connection [8086:1502] (rev 05)
        Subsystem: Intel Corporation Device [8086:3578]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 45
        Region 0: Memory at c2800000 (32-bit, non-prefetchable) [size=128K]
        Region 1: Memory at c2870000 (32-bit, non-prefetchable) [size=4K]
        Region 2: I/O ports at 5040 [size=32]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee00358  Data: 0000
        Capabilities: [e0] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset 
Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05) (prog-if 20 [EHCI])
        Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011] 
[8086:7270]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 22
        Region 0: Memory at c2860000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ehci_hcd

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 1 [8086:1c10] (rev b5) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: c1d00000-c26fffff
        Prefetchable memory behind bridge: 00000000c2900000-00000000c32fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #1, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 
<1us, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ 
Surprise+
                        Slot #259, PowerLimit 75.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+ 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna+ 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee002f8  Data: 0000
        Capabilities: [90] Subsystem: Intel Corporation Apple MacBookPro8,2 
[Core i7, 15", 2011] [8086:7270]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 5 [8086:1c18] (rev b5) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: c2700000-c27fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #5, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 
<512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna+ 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00318  Data: 0000
        Capabilities: [90] Subsystem: Intel Corporation Device [8086:7270]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1c.5 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset 
Family PCI Express Root Port 6 [8086:1c1a] (rev b5) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        Memory behind bridge: c0000000-c18fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #6, Speed 5GT/s, Width x1, ASPM L0s L1, Latency L0 
<512ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt+ ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #0, PowerLimit 10.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState+
                RootCtl: ErrCorrectable+ ErrNon-Fatal+ ErrFatal+ PMEIntEna+ 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
                DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
                DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
                LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, 
Selectable De-emphasis: -6dB
                         Transmit Margin: Normal Operating Range, 
EnterModifiedCompliance- ComplianceSOS-
                         Compliance De-emphasis: -6dB
                LnkSta2: Current De-emphasis Level: -3.5dB, 
EqualizationComplete-, EqualizationPhase1-
                         EqualizationPhase2-, EqualizationPhase3-, 
LinkEqualizationRequest-
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00338  Data: 0000
        Capabilities: [90] Subsystem: Intel Corporation Device [8086:7270]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset 
Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05) (prog-if 20 [EHCI])
        Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011] 
[8086:7270]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at c2850000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Capabilities: [98] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP+
        Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
a5) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
        Capabilities: [50] Subsystem: Intel Corporation Device [8086:7270]

00:1f.0 ISA bridge [0601]: Intel Corporation C204 Chipset Family LPC Controller 
[8086:1c54] (rev 05)
        Subsystem: Intel Corporation Device [8086:7270]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset 
Family SATA AHCI Controller [8086:1c02] (rev 05) (prog-if 01 [AHCI 1.0])
        Subsystem: Intel Corporation Device [8086:7270]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 49
        Region 0: I/O ports at 5090 [size=8]
        Region 1: I/O ports at 5080 [size=4]
        Region 2: I/O ports at 5070 [size=8]
        Region 3: I/O ports at 5060 [size=4]
        Region 4: I/O ports at 5020 [size=32]
        Region 5: Memory at c2840000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee00418  Data: 0000
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
        Capabilities: [b0] PCI Advanced Features
                AFCap: TP+ FLR+
                AFCtrl: FLR-
                AFStatus: TP-
        Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family 
SMBus Controller [8086:1c22] (rev 05)
        Subsystem: Intel Corporation Apple MacBookPro8,2 [Core i7, 15", 2011] 
[8086:7270]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin D routed to IRQ 22
        Region 0: Memory at c2830000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 5000 [size=32]

01:00.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic SAS1064ET 
PCI-Express Fusion-MPT SAS [1000:0056] (rev 08)
        Subsystem: Intel Corporation Device [8086:34dc]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at 4000 [size=256]
        Region 1: Memory at c1c10000 (64-bit, non-prefetchable) [size=16K]
        Region 3: Memory at c1c00000 (64-bit, non-prefetchable) [size=64K]
        Expansion ROM at c1a00000 [disabled] [size=2M]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency 
L0 <64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- 
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [98] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [b0] MSI-X: Enable- Count=1 Masked-
                Vector table: BAR=1 offset=00002000
                PBA: BAR=1 offset=00003000
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UESvrt: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ 
RxOF+ MalfTLP+ ECRC+ UnsupReq+ ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
        Kernel driver in use: mptsas

03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network 
Connection [8086:10d3]
        Subsystem: Intel Corporation Device [8086:3578]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at c2700000 (32-bit, non-prefetchable) [size=128K]
        Region 2: I/O ports at 2000 [size=32]
        Region 3: Memory at c2720000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, 
L1 <64us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ 
Unsupported+
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 512 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency 
L0 <128ns, L1 <64us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
                Vector table: BAR=3 offset=00000000
                PBA: BAR=3 offset=00002000
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UESvrt: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt+ UnxCmplt+ 
RxOF+ MalfTLP+ ECRC- UnsupReq+ ACSViol-
                CESta:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
                AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
        Capabilities: [140 v1] Device Serial Number 00-1e-67-ff-ff-47-42-2c
        Kernel driver in use: e1000e

04:00.0 VGA compatible controller [0300]: Matrox Electronics Systems Ltd. MGA 
G200e [Pilot] ServerEngines (SEP1) [102b:0522] (rev 02) (prog-if 00 [VGA 
controller])
        Subsystem: Intel Corporation Device [8086:0102]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ 
Stepping- SERR+ FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 3
        Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at c1810000 (32-bit, non-prefetchable) [size=16K]
        Region 2: Memory at c1000000 (32-bit, non-prefetchable) [size=8M]
        Expansion ROM at c1800000 [disabled] [size=64K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [e4] Express (v1) Legacy Endpoint, MSI 00
                DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, 
L1 <1us
                        ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 
<64ns, L1 <1us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [54] MSI: Enable- Count=1/1 Maskable- 64bit-
                Address: 00000000  Data: 0000


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 046b:ff10 American Megatrends, Inc. Virtual Keyboard and 
Mouse
Bus 002 Device 003: ID 18a5:0400 Verbatim, Ltd 
Bus 002 Device 004: ID 04d9:1400 Holtek Semiconductor, Inc. PS/2 keyboard + 
mouse controller


-- System Information:
Debian Release: 7.6
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.49
ii  initramfs-tools [linux-initramfs-tool]  0.109.1
ii  kmod                                    9-3
ii  linux-base                              3.5
ii  module-init-tools                       9-3

Versions of packages linux-image-3.2.0-4-amd64 recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 1.99-27+deb7u2
pn  linux-doc-3.2           <none>

Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
  linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
  linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
  linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:


-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: 
https://lists.debian.org/20150616123547.4190.11089.report...@otaria.galileo.lan

Reply via email to