Package: src:linux
Version: 4.0.5-1
Severity: minor
File: linux-image-4.0.0.2-686-pae

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * What led up to the situation?
   * What exactly did you do (or not do) that was effective (or
     ineffective)?
   * What was the outcome of this action?
   * What outcome did you expect instead?

*** End of the template - remove these template lines ***


-- Package-specific info:
** Version:
Linux version 4.0.0-2-686-pae (debian-kernel@lists.debian.org) (gcc version 
4.9.2 (Debian 4.9.2-21) ) #1 SMP Debian 4.0.5-1 (2015-06-16)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.0.0-2-686-pae 
root=UUID=51052b81-aa31-419e-8bb0-8a6ca7f0b466 ro vga=0x11a quiet 
init=/lib/sysvinit/init

** Tainted: O (4096)
 * Out-of-tree module has been loaded.

** Kernel log:
[   19.696746] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   20.316204] [drm] Initialized drm 1.1.0 20060810
[   20.744029] floppy0: no floppy controllers found
[   20.755732] [drm] Memory usable by graphics device = 512M
[   20.755735] [drm] Replacing VGA console driver
[   20.756336] Console: switching to colour dummy device 80x25
[   20.780035] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   20.780038] [drm] Driver supports precise vblank timestamp query.
[   20.780093] vgaarb: device changed decodes: 
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   20.781167] [drm] initialized overlay support
[   20.781213] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD 
(20150204/video-1257)
[   20.781216] ACPI: Video Device [GFX0] (multi-head: no  rom: yes  post: no)
[   20.781295] input: Video Bus as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9
[   20.781347] [drm] Initialized i915 1.6.0 20150130 for 0000:00:02.0 on minor 0
[   20.800834] fbcon: inteldrmfb (fb0) is primary device
[   20.830537] Console: switching to colour frame buffer device 128x48
[   20.843142] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   20.843144] i915 0000:00:02.0: registered panic notifier
[   22.176370] input: A4Tech USB Mouse as 
/devices/pci0000:00/0000:00:1d.2/usb3/3-1/3-1:1.0/0003:09DA:000A.0001/input/input10
[   22.176833] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse 
[A4Tech USB Mouse] on usb-0000:00:1d.2-1/input0
[   28.193828] Adding 979928k swap on /dev/sda5.  Priority:-1 extents:1 
across:979928k FS
[   28.236676] EXT4-fs (sda1): re-mounted. Opts: (null)
[   77.056307] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   77.268900] lp: driver loaded but no devices found
[   77.274114] ppdev: user-space parallel port driver
[   77.288182] loop: module loaded
[   80.855184] EXT4-fs (sda2): mounting ext3 file system using the ext4 
subsystem
[   80.892495] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: 
(null)
[   80.918973] EXT4-fs (sda6): mounting ext3 file system using the ext4 
subsystem
[   80.929943] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: 
(null)
[   80.943836] EXT4-fs (sda7): mounting ext3 file system using the ext4 
subsystem
[   80.956608] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: 
(null)
[   80.970449] EXT4-fs (sda8): mounting ext3 file system using the ext4 
subsystem
[   80.998096] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: 
(null)
[   81.015903] EXT4-fs (sdb1): mounting ext3 file system using the ext4 
subsystem
[   81.041080] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: 
(null)
[   81.063360] EXT4-fs (sdb10): mounting ext3 file system using the ext4 
subsystem
[   81.087308] EXT4-fs (sdb10): mounted filesystem with ordered data mode. 
Opts: (null)
[   81.099346] EXT4-fs (sdb11): mounting ext3 file system using the ext4 
subsystem
[   81.169432] EXT4-fs (sdb11): mounted filesystem with ordered data mode. 
Opts: (null)
[   81.186146] EXT4-fs (sdb2): mounting ext3 file system using the ext4 
subsystem
[   81.212094] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: 
(null)
[   81.216840] EXT4-fs (sdb5): mounting ext3 file system using the ext4 
subsystem
[   81.262717] EXT4-fs (sdb5): mounted filesystem with ordered data mode. Opts: 
(null)
[   81.278349] EXT4-fs (sdb6): mounting ext3 file system using the ext4 
subsystem
[   81.297096] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: 
(null)
[   81.303350] EXT4-fs (sdb7): mounting ext3 file system using the ext4 
subsystem
[   81.324473] EXT4-fs (sdb7): mounted filesystem with ordered data mode. Opts: 
(null)
[   81.324636] EXT4-fs (sdb8): mounting ext3 file system using the ext4 
subsystem
[   81.346535] EXT4-fs (sdb8): mounted filesystem with ordered data mode. Opts: 
(null)
[   81.346695] EXT4-fs (sdb9): mounting ext3 file system using the ext4 
subsystem
[   81.377029] EXT4-fs (sdb9): mounted filesystem with ordered data mode. Opts: 
(null)
[   81.945284] r8169 0000:03:00.0 eth0: link down
[   81.945293] r8169 0000:03:00.0 eth0: link down
[   81.945307] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   83.633760] RPC: Registered named UNIX socket transport module.
[   83.633763] RPC: Registered udp transport module.
[   83.633764] RPC: Registered tcp transport module.
[   83.633765] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   83.644466] FS-Cache: Loaded
[   83.685387] FS-Cache: Netfs 'nfs' registered for caching
[   83.738541] Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
[   84.257309] r8169 0000:03:00.0 eth0: link up
[   84.257319] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   85.045855] statnetd uses obsolete (PF_INET,SOCK_PACKET)
[   85.045876] device eth0 entered promiscuous mode
[   85.795078] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery 
directory
[   85.848099] NFSD: starting 90-second grace period (net c16c2300)
[   90.869581] Process accounting resumed
[  110.993259] systemd-logind[3120]: New seat seat0.
[  111.027322] systemd-logind[3120]: Watching system buttons on 
/dev/input/event3 (Power Button)
[  111.027420] systemd-logind[3120]: Watching system buttons on 
/dev/input/event9 (Video Bus)
[  111.027513] systemd-logind[3120]: Watching system buttons on 
/dev/input/event2 (Power Button)
[  111.027606] systemd-logind[3120]: Watching system buttons on 
/dev/input/event1 (Sleep Button)
[  111.031516] systemd-logind[3120]: Failed to start user service: Unknown 
unit: user@1000.service
[  111.034794] systemd-logind[3120]: New session 1 of user yx.
[  137.002034] vboxdrv: Found 2 processor cores.
[  137.002146] vboxdrv: fAsync=0 offMin=0x2ac offMax=0x831
[  137.002211] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 
'normal'.
[  137.002213] vboxdrv: Successfully loaded version 4.3.28_Debian (interface 
0x001a000a).
[  138.245549] vboxpci: IOMMU not found (not compiled)
[  606.644153] systemd-logind[3120]: New session 2 of user yx.
[  666.647546] systemd-logind[3120]: Failed to start user service: Unknown 
unit: user@0.service
[  666.650854] systemd-logind[3120]: New session 3 of user root.
[  795.659964] systemd-logind[3120]: New session 4 of user root.
[  896.933285] r8169 0000:03:00.0 eth0: link down
[  896.933311] r8169 0000:03:00.0 eth0: link down
[  896.933498] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[  899.631743] r8169 0000:03:00.0 eth0: link up
[  899.631752] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  903.613031] systemd-logind[3120]: New session 5 of user root.
[ 3788.336059] device eth1 entered promiscuous mode
[ 3788.370365] Bluetooth: Core ver 2.20
[ 3788.370381] NET: Registered protocol family 31
[ 3788.370383] Bluetooth: HCI device and connection manager initialized
[ 3788.370387] Bluetooth: HCI socket layer initialized
[ 3788.370389] Bluetooth: L2CAP socket layer initialized
[ 3788.370395] Bluetooth: SCO socket layer initialized
[ 3788.404624] Netfilter messages via NETLINK v0.30.
[ 3803.355179] perf interrupt took too long (2509 > 2500), lowering 
kernel.perf_event_max_sample_rate to 50000

** Model information
not available

** Loaded modules:
nfnetlink_queue
nfnetlink_log
nfnetlink
bluetooth
rfkill
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
loop
parport_pc
ppdev
lp
parport
hid_a4tech
i915
drm_kms_helper
drm
iTCO_wdt
i2c_algo_bit
iTCO_vendor_support
pcspkr
i2c_i801
snd_hda_codec_realtek
snd_hda_codec_generic
coretemp
evdev
serio_raw
snd_hda_intel
snd_hda_controller
sg
lpc_ich
mfd_core
snd_hda_codec
snd_hwdep
rng_core
shpchp
8250_fintek
video
snd_pcm
snd_timer
snd
soundcore
button
acpi_cpufreq
processor
thermal_sys
ext4
crc16
mbcache
jbd2
md_mod
usbhid
hid
sr_mod
cdrom
sd_mod
ata_generic
ata_piix
via_rhine
libata
scsi_mod
ehci_pci
r8169
mii
uhci_hcd
ehci_hcd
usbcore
usb_common

** Network interface configuration:

auto lo
iface lo inet loopback



allow-hotplug eth0
iface eth0 inet static
        address 10.0.1.13 
        netmask 255.255.255.224
        network 10.0.1.0
        broadcast 10.0.1.31
        gateway 10.0.0.3
        hardware ether 00:1c:c0:1d:e1:e0
        dns-nameservers 10.0.1.13 10.0.0.3
        dns-search at

allow-hotplug eth1
iface eth1 inet static
        address 10.0.0.3
        netmask 255.255.255.0
        network 10.0.0.0
        broadcast 10.0.0.255    
        gateway 10.0.0.138
        hardware ether 00:11:95:80:93:98
        dns-nameservers 194.183.128.35 194.183.128.36
        dns-searche at

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group 
default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast 
state UP group default qlen 1000
    link/ether 00:1c:c0:1d:e1:e0 brd ff:ff:ff:ff:ff:ff
    inet 10.0.1.13/24 brd 10.0.1.31 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::21c:c0ff:fe1d:e1e0/64 scope link 
       valid_lft forever preferred_lft forever
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP 
group default qlen 1000
    link/ether 00:11:95:80:93:98 brd ff:ff:ff:ff:ff:ff
    inet 10.0.0.3/24 brd 10.0.0.255 scope global eth1
       valid_lft forever preferred_lft forever
    inet6 fe80::211:95ff:fe80:9398/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    
packets errs drop fifo colls carrier compressed
    lo:  228780     898    0    0    0     0          0         0   228780     
898    0    0    0     0       0          0
  eth0:   36646     327    0    0    0     0          0         0   418578    
2705    0    0    0     0       0          0
  eth1: 15793392   43344    0    0    0     0          0         0 14988633   
44416    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    43505 total packets received
    11 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    43494 incoming packets delivered
    45323 requests sent out
    14 dropped because of missing route
    16 fragments received ok
    32 fragments created
Icmp:
    62 ICMP messages received
    5 input ICMP message failed.
    InCsumErrors: 4
    ICMP input histogram:
        destination unreachable: 58
    7 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 7
IcmpMsg:
        InType3: 58
        OutType3: 7
Tcp:
    1406 active connections openings
    110 passive connection openings
    96 failed connection attempts
    8 connection resets received
    111 connections established
    25938 segments received
    25986 segments send out
    664 segments retransmited
    0 bad segments received.
    4408 resets sent
Udp:
    17788 packets received
    7 packets to unknown port received.
    0 packet receive errors
    18766 packets sent
    IgnoredMulti: 57
UdpLite:
TcpExt:
    2 resets received for embryonic SYN_RECV sockets
    60 TCP sockets finished time wait in fast timer
    1 packets rejects in established connections because of timestamp
    876 delayed acks sent
    3 delayed acks further delayed because of locked socket
    Quick ack mode was activated 27 times
    40 packets directly queued to recvmsg prequeue.
    32 bytes directly received in process context from prequeue
    5728 packet headers predicted
    6570 acknowledgments not containing data payload received
    1856 predicted acknowledgments
    22 congestion windows recovered without slow start after partial ack
    3 timeouts after SACK recovery
    176 other TCP timeouts
    TCPLossProbes: 147
    TCPLossProbeRecovery: 9
    29 DSACKs sent for old packets
    117 DSACKs received
    2 connections reset due to unexpected data
    5 connections aborted due to timeout
    TCPDSACKIgnoredNoUndo: 38
    TCPSackShiftFallback: 2
    TCPRcvCoalesce: 341
    TCPOFOQueue: 450
    TCPAutoCorking: 766
    TCPSynRetrans: 459
    TCPOrigDataSent: 10834
    TCPHystartTrainDetect: 1
    TCPHystartTrainCwnd: 16
    TCPHystartDelayDetect: 2
    TCPHystartDelayCwnd: 57
    TCPACKSkippedSeq: 4
IpExt:
    InMcastPkts: 2242
    OutMcastPkts: 2368
    InBcastPkts: 347
    OutBcastPkts: 228
    InOctets: 15530142
    OutOctets: 14647705
    InMcastOctets: 234983
    OutMcastOctets: 275339
    InBcastOctets: 55572
    OutBcastOctets: 33728
    InNoECTPkts: 43437
    InECT1Pkts: 21
    InECT0Pkts: 9
    InCEPkts: 38


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM 
Controller [8086:29c0] (rev 02)
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information: Len=0b <?>
        Kernel driver in use: agpgart-intel

00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI 
Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000]
        Capabilities: [80] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee0300c  Data: 41a1
        Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE+
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- 
TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <8us
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- 
Surprise-
                        Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- 
LinkChg-
                        Control: AttnInd Off, PwrInd On, Power- Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending+ InProgress-
        Capabilities: [140 v1] Root Complex Link
                Desc:   PortNumber=02 ComponentID=01 EltType=Config
                Link0:  Desc:   TargetPort=00 TargetComponent=01 AssocRCRB- 
LinkType=MemMapped LinkValid+
                        Addr:   00000000fed19000
        Kernel driver in use: pcieport

00:02.0 VGA compatible controller [0300]: Intel Corporation 82G33/G31 Express 
Integrated Graphics Controller [8086:29c2] (rev 02) (prog-if 00 [VGA 
controller])
        Subsystem: Intel Corporation 82G33/G31 Express Integrated Graphics 
Controller [8086:29c2]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 29
        Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=512K]
        Region 1: I/O ports at d140 [size=8]
        Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
        Region 3: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
        Expansion ROM at <unassigned> [disabled]
        Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee0300c  Data: 4182
        Capabilities: [d0] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: i915

00:1b.0 Audio device [0403]: Intel Corporation NM10/ICH7 Family High Definition 
Audio Controller [8086:27d8] (rev 01)
        Subsystem: Intel Corporation Device [8086:d608]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 28
        Region 0: Memory at feb80000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
                Address: 00000000fee0300c  Data: 4172
        Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
                VC1:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable- ID=0 ArbSelect=Fixed TC/VC=00
                        Status: NegoPending- InProgress-
        Capabilities: [130 v1] Root Complex Link
                Desc:   PortNumber=0f ComponentID=02 EltType=Config
                Link0:  Desc:   TargetPort=00 TargetComponent=02 AssocRCRB- 
LinkType=MemMapped LinkValid+
                        Addr:   00000000fed1c000
        Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 
1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: e4000000-e41fffff
        Prefetchable memory behind bridge: 0000000130000000-00000001301fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <1us, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ 
Surprise+
                        Slot #1, PowerLimit 10.000W; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ 
LinkChg+
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee0300c  Data: 41b1
        Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI 
Express Port 1 [8086:27d0]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed+ WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
                        Status: NegoPending- InProgress-
                VC1:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable- ID=0 ArbSelect=Fixed TC/VC=00
                        Status: NegoPending- InProgress-
        Capabilities: [180 v1] Root Complex Link
                Desc:   PortNumber=01 ComponentID=02 EltType=Config
                Link0:  Desc:   TargetPort=00 TargetComponent=02 AssocRCRB- 
LinkType=MemMapped LinkValid+
                        Addr:   00000000fed1c001
        Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI Express Port 
2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
        I/O behind bridge: 0000c000-0000cfff
        Memory behind bridge: fea00000-feafffff
        Prefetchable memory behind bridge: 0000000130200000-00000001303fffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
                DevCap: MaxPayload 128 bytes, PhantFunc 0
                        ExtTag- RBE-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                        MaxPayload 128 bytes, MaxReadReq 128 bytes
                DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ 
TransPend-
                LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit 
Latency L0s <256ns, L1 <4us
                        ClockPM- Surprise- LLActRep+ BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive+ BWMgmt- ABWMgmt-
                SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ 
Surprise+
                        Slot #2, PowerLimit 10.000W; Interlock- NoCompl-
                SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ 
LinkChg+
                        Control: AttnInd Unknown, PwrInd Unknown, Power- 
Interlock-
                SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ 
Interlock-
                        Changed: MRL- PresDet- LinkState-
                RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ 
CRSVisible-
                RootCap: CRSVisible-
                RootSta: PME ReqID 0000, PMEStatus- PMEPending-
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
                Address: fee0300c  Data: 41d1
        Capabilities: [90] Subsystem: Intel Corporation NM10/ICH7 Family PCI 
Express Port 2 [8086:27d2]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [100 v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed+ WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
                VC1:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable- ID=1 ArbSelect=Fixed TC/VC=00
                        Status: NegoPending- InProgress-
        Capabilities: [180 v1] Root Complex Link
                Desc:   PortNumber=02 ComponentID=02 EltType=Config
                Link0:  Desc:   TargetPort=00 TargetComponent=02 AssocRCRB- 
LinkType=MemMapped LinkValid+
                        Addr:   00000000fed1c001
        Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 
[8086:27c8]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at d080 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 
[8086:27c9]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at d060 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 
[8086:27ca]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at d040 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB UHCI 
Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
        Subsystem: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 
[8086:27cb]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin D routed to IRQ 16
        Region 4: I/O ports at d020 [size=32]
        Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI 
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
        Subsystem: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller 
[8086:27cc]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at feb84000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port: BAR=1 offset=00a0
        Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 
e1) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
        I/O behind bridge: 0000b000-0000bfff
        Memory behind bridge: fe900000-fe9fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
                PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
        Capabilities: [50] Subsystem: Device [0000:0000]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC 
Interface Bridge [8086:27b8] (rev 01)
        Subsystem: Intel Corporation DeskTop Board D945GTP [8086:544e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information: Len=0c <?>
        Kernel driver in use: lpc_ich

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE 
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
        Subsystem: Intel Corporation 82801G (ICH7 Family) IDE Controller 
[8086:27df]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374
        Region 4: I/O ports at d0f0 [size=16]
        Kernel driver in use: ata_piix

00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA 
Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP 
PriO])
        Subsystem: Intel Corporation NM10/ICH7 Family SATA Controller [IDE 
mode] [8086:27c0]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0
        Interrupt: pin B routed to IRQ 17
        Region 0: I/O ports at d0e0 [size=8]
        Region 1: I/O ports at d0d0 [size=4]
        Region 2: I/O ports at d0c0 [size=8]
        Region 3: I/O ports at d0b0 [size=4]
        Region 4: I/O ports at d0a0 [size=16]
        Capabilities: [70] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller 
[8086:27da] (rev 01)
        Subsystem: Intel Corporation Device [8086:d608]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Interrupt: pin B routed to IRQ 17
        Region 4: I/O ports at d000 [size=32]
        Kernel driver in use: i801_smbus

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 01)
        Subsystem: Intel Corporation Device [8086:d608]
        Physical Slot: 2
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 27
        Region 0: I/O ports at c000 [size=256]
        Region 2: Memory at fea20000 (64-bit, non-prefetchable) [size=4K]
        Expansion ROM at fea00000 [disabled] [size=128K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA 
PME(D0-,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME+
        Capabilities: [48] Vital Product Data
                Unknown small resource type 05, will not decode more.
        Capabilities: [50] MSI: Enable+ Count=1/2 Maskable- 64bit+
                Address: 00000000fee0200c  Data: 4152
        Capabilities: [60] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <128ns, 
L1 unlimited
                        ExtTag+ AttnBtn+ AttnInd+ PwrInd+ RBE- FLReset-
                DevCtl: Report errors: Correctable- Non-Fatal- Fatal- 
Unsupported-
                        RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 128 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ 
TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Exit 
Latency L0s unlimited, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ 
DLActive- BWMgmt- ABWMgmt-
        Capabilities: [84] Vendor Specific Information: Len=4c <?>
        Capabilities: [100 v1] Advanced Error Reporting
                UESta:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk:  DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
                UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- 
RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
                CESta:  RxErr+ BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk:  RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn-
        Capabilities: [12c v1] Virtual Channel
                Caps:   LPEVC=0 RefClk=100ns PATEntryBits=1
                Arb:    Fixed- WRR32- WRR64- WRR128-
                Ctrl:   ArbSelect=Fixed
                Status: InProgress-
                VC0:    Caps:   PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
                        Arb:    Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
                        Ctrl:   Enable+ ID=0 ArbSelect=Fixed TC/VC=01
                        Status: NegoPending- InProgress-
        Capabilities: [148 v1] Device Serial Number 00-00-00-00-00-ec-81-68
        Capabilities: [154 v1] Power Budgeting <?>
        Kernel driver in use: r8169

04:06.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105/VT6106S 
[Rhine-III] [1106:3106] (rev 86)
        Subsystem: D-Link System Inc DFE-530TX rev C [1186:1403]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping+ SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (750ns min, 2000ns max), Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 21
        Region 0: I/O ports at b000 [size=256]
        Region 1: Memory at fe910000 (32-bit, non-prefetchable) [size=256]
        Expansion ROM at fe900000 [disabled] [size=64K]
        Capabilities: [40] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Kernel driver in use: via-rhine


** USB devices:
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 09da:000a A4 Tech Co., Ltd Optical Mouse Opto 510D
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (650, 'testing'), (600, 'unstable'), (500, 'oldstable-updates'), 
(500, 'oldstable')
Architecture: i386 (i686)

Kernel: Linux 4.0.0-2-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: unable to detect

Versions of packages linux-image-4.0.0-2-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.56
ii  initramfs-tools [linux-initramfs-tool]  0.120
ii  kmod                                    20-1
ii  linux-base                              3.5

Versions of packages linux-image-4.0.0-2-686-pae recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.0.6-3
ii  libc6-i686           2.19-18

Versions of packages linux-image-4.0.0-2-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-26
pn  linux-doc-4.0           <none>

Versions of packages linux-image-4.0.0-2-686-pae is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-4.0.0-2-686-pae/postinst/mips-initrd-4.0.0-2-686-pae:
  linux-image-4.0.0-2-686-pae/postinst/depmod-error-initrd-4.0.0-2-686-pae: 
false
  linux-image-4.0.0-2-686-pae/prerm/removing-running-kernel-4.0.0-2-686-pae: 
true

Sorry for sending so much
sorry for sending so much :->>


-- 
To UNSUBSCRIBE, email to debian-kernel-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Archive: https://lists.debian.org/20150702081218.6308.27844.reportbug@9398

Reply via email to