Hi, Once again, I'm trying to get translations completed for Debian Installer. Attached is sublevel 5 for your language, which is currently incomplete.
Please consider completing and committing it (feel free to ask me in case you have trouble committing). There is no strict deadline, but Debian will likely release in 2012, so it really begins to be worrying when languages are not complete in D-I. Thanks in advance,
# Danish messages for debian-installer. # This file is distributed under the same license as debian-installer. # # Jacob Sparre Andersen <[email protected]>, 2008, 2010. # Reviewed 2007 by Niels Rasmussen. # Claus Hindsgaul <[email protected]>, 2004-2007. # msgid "" msgstr "" "Project-Id-Version: debian-installer\n" "Report-Msgid-Bugs-To: \n" "POT-Creation-Date: 2011-11-27 22:51+0000\n" "PO-Revision-Date: 2010-09-12 05:44+0100\n" "Last-Translator: Anders Jenbo <[email protected]>\n" "Language-Team: Danish <[email protected]>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" "Content-Transfer-Encoding: 8bit\n" "Plural-Forms: nplurals=2; plural=(n != 1);\n" "X-Poedit-Bookmarks: 282,1006,1041,-1,-1,-1,-1,-1,-1,-1\n" "X-Generator: KBabel 1.11.4\n" #. Type: text #. Description #. :sl5: #: ../partman-base.templates:60001 #, no-c-format msgid "ZFS pool %s, volume %s" msgstr "" #. Type: text #. Description #. :sl5: #: ../partman-base.templates:62001 #, no-c-format msgid "DASD %s (%s)" msgstr "DASD %s (%s)" #. Type: text #. Description #. :sl5: #: ../partman-base.templates:63001 #, no-c-format msgid "DASD %s (%s), partition #%s" msgstr "DASD %s (%s), partition #%s" #. Type: text #. Description #. :sl5: #. Setting to reserve a small part of the disk for use by BIOS-based bootloaders #. such as GRUB. #: ../partman-partitioning.templates:36001 msgid "Reserved BIOS boot area" msgstr "Reserveret BIOS-opstartsområde" #. Type: text #. Description #. :sl5: #. short variant of 'Reserved BIOS boot area' #. Up to 10 character positions #: ../partman-partitioning.templates:37001 msgid "biosgrub" msgstr "biosgrub" #. Type: text #. Description #. :sl5: #: ../partman-efi.templates:1001 msgid "" "In order to start your new system, the firmware on your Itanium system loads " "the boot loader from its private EFI partition on the hard disk. The boot " "loader then loads the operating system from that same partition. An EFI " "partition has a FAT16 file system formatted on it and the bootable flag set. " "Most installations place the EFI partition on the first primary partition of " "the same hard disk that holds the root file system." msgstr "" "For at starte dit nye system, vil dit Itanium-systems firmware indlæse " "opstartsindlæseren fra sin private EFI-partition på harddisken. " "Opstartsindlæseren indlæser derefter styresystemet fra den samme partition. " "EFI-partitionen er formateret med et FAT16-filsystem markeret som opstartbar " "(\"bootable flag\" sat). De fleste installationer lægger EFI-partitionen på " "den første primære partition på den harddisk, der indeholder rodfilsystemet." #. Type: text #. Description #. :sl5: #. Type: text #. Description #. :sl5: #: ../partman-efi.templates:2001 ../partman-efi.templates:4001 msgid "EFI boot partition" msgstr "EFI-opstartspatition" #. Type: boolean #. Description #. :sl5: #: ../partman-efi.templates:3001 msgid "No EFI partition was found." msgstr "Fandt ingen EFI-partition." #. Type: text #. Description #. :sl5: #. short variant of 'EFI boot partition' #. Up to 10 character positions #: ../partman-efi.templates:5001 msgid "EFIboot" msgstr "EFIboot" #. Type: text #. Description #. :sl5: #: ../partman-efi.templates:7001 msgid "EFI-fat16" msgstr "EFI-fat16" #. Type: error #. Description #. :sl5: #: ../partconf.templates:1001 msgid "" "No partitions were found in your system. You may need to partition your hard " "drives or load additional kernel modules." msgstr "" "Fandt ingen partitioner på dit system. Du er muligvis nødt til at " "partitionere dine harddiske eller indlæse yderligere kernemoduler." #. Type: error #. Description #. :sl5: #: ../partconf.templates:2001 msgid "No file systems found" msgstr "Fandt ingen filsystemer" #. Type: error #. Description #. :sl5: #: ../partconf.templates:2001 msgid "" "No usable file systems were found. You may need to load additional kernel " "modules." msgstr "" "Der blev ikke fundet nogen brugbare filsystemer. Du er muligvis nødt til at " "indlæse yderligere kernemoduler." #. Type: select #. Choices #. :sl5: #: ../partconf.templates:3001 msgid "Abort" msgstr "Afbryd" #. Type: select #. Choices #. :sl5: #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) #: ../partconf.templates:4001 msgid "Leave the file system intact" msgstr "Efterlad filsystemet intakt" #. Type: select #. Choices #. :sl5: #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) #. Type: select #. Choices #. :sl5: #. Note to translators : Please keep your translations of each choice #. (separated by commas) #. below a 65 columns limit (which means 65 characters #. in single-byte languages) #: ../partconf.templates:4001 ../partconf.templates:5001 msgid "Create swap space" msgstr "Opret swapområde" #. Type: select #. Description #. :sl5: #. Type: select #. Description #. :sl5: #: ../partconf.templates:4002 ../partconf.templates:5002 msgid "Action on ${PARTITION}:" msgstr "Handling på ${PARTITION}:" #. Type: select #. Description #. :sl5: #: ../partconf.templates:4002 msgid "" "This partition seems to already have a file system (${FSTYPE}). You can " "choose to leave this file system intact, create a new file system, or create " "swap space." msgstr "" "Partitionen lader allerede til at indeholde et filsystem (${FSTYPE}). Du kan " "vælge at efterlade det intakt, oprette et filsystem eller et swapområde." #. Type: select #. Description #. :sl5: #: ../partconf.templates:5002 msgid "" "This partition does not seem to have a file system. You can create a file " "system or swap space on it." msgstr "" "Denne partition lader ikke til at have et filsystem. Du kan oprette et " "filsystem eller et swapområde på den." #. Type: select #. Choices #. Note to translators : Please keep your translations of each choice #. (separated by commas) #. below a 65 columns limit (which means 65 characters #. in single-byte languages) #. :sl5: #. "it" is a partition #: ../partconf.templates:6001 msgid "Don't mount it" msgstr "Montér det ikke" #. Type: select #. Description #. :sl5: #. Type: string #. Description #. :sl5: #: ../partconf.templates:6002 ../partconf.templates:7001 msgid "Mount point for ${PARTITION}:" msgstr "Monteringspunkt for ${PARTITION}:" #. Type: select #. Description #. :sl5: #: ../partconf.templates:6002 msgid "" "When a partition is mounted, it is available to the users of the system. You " "always need a root (\"/\") partition, and it's often good to have a separate " "partition for /home." msgstr "" "Når en partition er monteret, er den tilgængelig for brugerne på systemet. " "Du skal altid have en rodpartition (\"/\"), og det er ofte en god idé at " "have en separat partition til /home." #. Type: string #. Description #. :sl5: #: ../partconf.templates:7001 msgid "Please enter where the partition should be mounted." msgstr "Angiv hvor partitionen skal monteres." #. Type: boolean #. Description #. :sl5: #: ../partconf.templates:8001 msgid "Do you want to unmount the partitions so you can make changes?" msgstr "Ønsker du at afmontere partitionerne, så du kan udføre ændringer?" #. Type: boolean #. Description #. :sl5: #: ../partconf.templates:8001 msgid "" "Since the partitions have already been mounted, you cannot do any changes." msgstr "" "Da partitionerne allerede er monterede, kan du ikke udføre nogen ændringer." #. Type: error #. Description #. :sl5: #: ../partconf.templates:9001 msgid "Failed to unmount partitions" msgstr "Kunne ikke afmontere partitionerne" #. Type: error #. Description #. :sl5: #: ../partconf.templates:9001 msgid "An unexpected error occurred while unmounting the partitions." msgstr "Der opstod en uventet fejl under afmonteringen af partitionerne." #. Type: error #. Description #. :sl5: #: ../partconf.templates:9001 msgid "The partition configuration process has been aborted." msgstr "Partitioneringen blev afbrudt." #. Type: text #. Description #. :sl5: #: ../partconf.templates:10001 #, no-c-format msgid "Create %s file system" msgstr "Opret %s-filsystem" #. Type: error #. Description #. :sl5: #: ../partconf.templates:11001 msgid "No root partition (/)" msgstr "Ingen rodpartition (/)" #. Type: error #. Description #. :sl5: #: ../partconf.templates:11001 msgid "" "You need a root partition. Please assign a partition to the root mount point " "before continuing." msgstr "" "Du skal have en rodpartition. Udpeg en partition til at være monteringspunkt " "for roden, før du fortsætter." #. Type: error #. Description #. :sl5: #: ../partconf.templates:12001 msgid "Partition assigned to ${MOUNT}" msgstr "Partition udpeget til ${MOUNT}" #. Type: error #. Description #. :sl5: #: ../partconf.templates:12001 msgid "Mounting a partition on ${MOUNT} makes no sense. Please change this." msgstr "" "Det giver ingen mening at montere en partition på ${MOUNT}. Ret det venligst." #. Type: error #. Description #. :sl5: #: ../partconf.templates:13001 msgid "Several partitions assigned to ${MOUNT}" msgstr "Flere partitioner er blevet tildelt ${MOUNT}" #. Type: error #. Description #. :sl5: #: ../partconf.templates:13001 msgid "" "You cannot assign several partitions to the same mount point. Please change " "all but one of them." msgstr "" "Du kan ikke udpege flere partitioner til samme monteringspunkt. Ret venligst " "alle undtagen én." #. Type: boolean #. Description #. :sl5: #: ../partconf.templates:14001 msgid "Ready to create file systems and mount partitions?" msgstr "Klar til at oprette filsystemer og montere partitioner?" #. Type: boolean #. Description #. :sl5: #: ../partconf.templates:14001 msgid "File systems will be created and partitions mounted." msgstr "Filsystemer vil blive oprettet og partitioner monteret." #. Type: boolean #. Description #. :sl5: #: ../partconf.templates:14001 msgid "" "WARNING: This will destroy all data on the partitions you have assigned file " "systems to." msgstr "" "ADVARSEL: Dette vil ødelægge alle data på de partitioner, du har udpeget " "filsystemer til." #. Type: error #. Description #. :sl5: #: ../partconf.templates:15001 msgid "Failed to create swap space on ${PARTITION}" msgstr "Kunne ikke oprette swapområde på ${PARTITION}" #. Type: error #. Description #. :sl5: #: ../partconf.templates:15001 msgid "An error occurred when the swap space was created on ${PARTITION}." msgstr "Der opstod en fejl, da swapområdet blev oprettet på ${PARTITION}." #. Type: error #. Description #. :sl5: #. Type: error #. Description #. :sl5: #. Type: error #. Description #. :sl5: #. Type: error #. Description #. :sl5: #: ../partconf.templates:15001 ../partconf.templates:16001 #: ../partconf.templates:17001 ../partconf.templates:18001 msgid "" "Please check the error log on the third console or /var/log/messages for " "more information." msgstr "" "Tjek fejlloggen på den tredje konsol eller /var/log/messages for flere " "oplysninger." #. Type: error #. Description #. :sl5: #: ../partconf.templates:16001 msgid "Failed to activate the swap space on ${PARTITION}" msgstr "Kunne ikke aktivere swapområdet på ${PARTITION}" #. Type: error #. Description #. :sl5: #: ../partconf.templates:16001 msgid "An error occurred when the swap space on ${PARTITION} was activated." msgstr "Der opstod en fejl, da swapområdet på ${PARTITION} blev aktiveret." #. Type: error #. Description #. :sl5: #: ../partconf.templates:17001 msgid "Failed to create ${FS} file system on ${PARTITION}" msgstr "Kunne ikke oprette ${FS}-filsystem på ${PARTITION}" #. Type: error #. Description #. :sl5: #: ../partconf.templates:17001 msgid "" "An error occurred when the ${FS} file system was created on ${PARTITION}." msgstr "" "Der opstod en fejl, da ${FS}-filsystemet blev oprettet på ${PARTITION}." #. Type: error #. Description #. :sl5: #: ../partconf.templates:18001 msgid "Failed to mount ${PARTITION} on ${MOUNT}" msgstr "Kunne ikke montere ${PARTITION} på ${MOUNT}" #. Type: error #. Description #. :sl5: #: ../partconf.templates:18001 msgid "An error occurred when ${PARTITION} was mounted on ${MOUNT}." msgstr "Der opstod en fejl, da ${PARTITION} blev monteret på ${MOUNT}." #. Type: text #. Description #. Main menu item #. :sl5: #: ../partconf.templates:19001 msgid "Configure and mount partitions" msgstr "Sæt partitioner op og montér dem" #. Type: select #. Description #. :sl5: #: ../partitioner.templates:1002 msgid "Disk to partition:" msgstr "Disk at partitionere:" #. Type: select #. Description #. :sl5: #: ../partitioner.templates:1002 msgid "Please choose one of the listed disks to create partitions on it." msgstr "Vælg en af de viste diske for at oprette partitioner på den." #. Type: select #. Description #. :sl5: #: ../partitioner.templates:1002 ../s390-dasd.templates:1002 msgid "Select \"Finish\" at the bottom of the list when you are done." msgstr "Vælg \"Afslut\" i bunden af listen, når du er færdig." #. Type: error #. Description #. :sl5: #: ../partitioner.templates:2001 msgid "No disk found" msgstr "Fandt ingen disk" #. Type: error #. Description #. :sl5: #: ../partitioner.templates:2001 msgid "" "Unable to find any disk in your system. Maybe some kernel modules need to be " "loaded." msgstr "" "Kunne ikke finde nogle diske på dit system. Måske skal du indlæse nogle " "kernemoduler." #. Type: error #. Description #. :sl5: #: ../partitioner.templates:3001 msgid "Partitioning error" msgstr "Partitioneringsfejl" #. Type: error #. Description #. :sl5: #: ../partitioner.templates:3001 msgid "Failed to partition the disk ${DISC}." msgstr "Kunne ikke partitionere disken ${DISC}." #. Type: text #. Description #. :sl5: #. Main menu item #: ../partitioner.templates:4001 msgid "Partition a hard drive" msgstr "Partitionér en harddisk" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl5: #: ../s390-netdevice.templates:1001 msgid "ctc: Channel to Channel (CTC) or ESCON connection" msgstr "ctc: Channel-to-Channel (CTC) eller ESCON-forbindelse" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl5: #: ../s390-netdevice.templates:1001 msgid "qeth: OSA-Express in QDIO mode / HiperSockets" msgstr "qeth: OSA-Express i QDIO-tilstand / HiperSockets" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl5: #: ../s390-netdevice.templates:1001 msgid "iucv: Inter-User Communication Vehicle - available for VM guests only" msgstr "iucv: Mellem-bruger kommunikations-transport - kun for VM-gæster" #. Type: select #. Choices #. Note to translators : Please keep your translations of the choices #. below a 65 columns limit (which means 65 characters #. in single-byte languages) including the initial path #. :sl5: #: ../s390-netdevice.templates:1001 msgid "virtio: KVM VirtIO" msgstr "" #. Type: select #. Description #. :sl5: #: ../s390-netdevice.templates:1002 msgid "Network device type:" msgstr "Netkorts-type:" #. Type: select #. Description #. :sl5: #: ../s390-netdevice.templates:1002 msgid "" "Please choose the type of your primary network interface that you will need " "for installing the Debian system (via NFS or HTTP). Only the listed devices " "are supported." msgstr "" "Vælg typen på det primære netkort, som du vil bruge til at installere Debian-" "systemet fra (via NFS eller HTTP). Kun de viste enheder understøttes." #. Type: select #. Description #. :sl5: #: ../s390-netdevice.templates:2001 msgid "CTC read device:" msgstr "CTC-læseenhed:" #. Type: select #. Description #. :sl5: #. Type: select #. Description #. :sl5: #: ../s390-netdevice.templates:2001 ../s390-netdevice.templates:3001 msgid "The following device numbers might belong to CTC or ESCON connections." msgstr "Følgende enhedsnumre kan tilhøre CTC- eller ESCON-forbindelser." #. Type: select #. Description #. :sl5: #: ../s390-netdevice.templates:3001 msgid "CTC write device:" msgstr "CTC-skriveenhed:" #. Type: boolean #. Description #. :sl5: #. Type: boolean #. Description #. :sl5: #. Type: boolean #. Description #. :sl5: #: ../s390-netdevice.templates:4001 ../s390-netdevice.templates:8001 #: ../s390-netdevice.templates:13001 msgid "Do you accept this configuration?" msgstr "Vil du acceptere denne opsætning?" #. Type: boolean #. Description #. :sl5: #: ../s390-netdevice.templates:4001 msgid "" "The configured parameters are:\n" " read channel = ${device_read}\n" " write channel = ${device_write}\n" " protocol = ${protocol}" msgstr "" "De konfigurerede indstillinger er:\n" " læsekanal = ${device_read}\n" " skrivekanal = ${device_write}\n" " protokol = ${protocol}" #. Type: error #. Description #. :sl5: #: ../s390-netdevice.templates:5001 msgid "No CTC or ESCON connections" msgstr "Ingen CTC- eller ESCON-forbindelser" #. Type: error #. Description #. :sl5: #: ../s390-netdevice.templates:5001 msgid "Please make sure that you have set them up correctly." msgstr "Sørg for at du har sat dem korrekt op." #. Type: select #. Description #. :sl5: #: ../s390-netdevice.templates:6001 msgid "Protocol for this connection:" msgstr "Protokol for denne forbindelse:" #. Type: select #. Description #. :sl5: #: ../s390-netdevice.templates:7001 msgid "Device:" msgstr "Enhed:" #. Type: select #. Description #. :sl5: #: ../s390-netdevice.templates:7001 msgid "Please select the OSA-Express QDIO / HiperSockets device." msgstr "Vælg OSA-Express QDIO / HiperSockets-enhed." #. Type: boolean #. Description #. :sl5: #: ../s390-netdevice.templates:8001 msgid "" "The configured parameters are:\n" " channels = ${device0}, ${device1}, ${device2}\n" " port = ${port}\n" " portname = ${portname}\n" " layer2 = ${layer2}" msgstr "" "De indstillede parametre er:\n" " kanaler = ${device0}, ${device1}, ${device2}\n" " port = ${port}\n" " portnavn = ${portname}\n" " lag2 = ${layer2}" #. Type: error #. Description #. :sl5: #: ../s390-netdevice.templates:9001 msgid "No OSA-Express QDIO cards / HiperSockets" msgstr "Ingen OSA-Express QDIO-kort / HiperSockets" #. Type: error #. Description #. :sl5: #: ../s390-netdevice.templates:9001 msgid "" "No OSA-Express QDIO cards / HiperSockets were detected. If you are running " "VM please make sure that your card is attached to this guest." msgstr "" "Fandt ingen OSA-Express QDIO-kort eller HiperSockets. Hvis du kører VM, så " "sørg for at dit kort er forbundet til denne gæst." #. Type: string #. Description #. :sl5: #: ../s390-netdevice.templates:10001 msgid "Portname:" msgstr "Portnavn:" #. Type: string #. Description #. :sl5: #: ../s390-netdevice.templates:10001 msgid "" "Please enter the portname of your OSA-Express card. This name must be 1 to 8 " "characters long and must be equal on all systems accessing the same card." msgstr "" "Angiv portnavnet for dit OSA-Express-kort. Det skal være mellem 1 og 8 tegn " "langt og være det samme på alle systemer, der tilgår det samme kort." #. Type: string #. Description #. :sl5: #: ../s390-netdevice.templates:10001 msgid "" "Leave it empty if you want to use HiperSockets. This parameter is required " "for cards with microcode level 2.10 or later or when you want to share a " "card." msgstr "" "Lad feltet stå tomt, hvis du vil bruge HiperSockets. Denne indstilling " "kræves for kort med microcode-niveau 2.10 eller senere, eller når du vil " "dele et kort." #. Type: string #. Description #. :sl5: #: ../s390-netdevice.templates:10001 msgid "The name will automatically be converted to uppercase." msgstr "Navnet bliver automatisk omsat til store bogstaver." #. Type: string #. Description #. :sl5: #: ../s390-netdevice.templates:11001 msgid "Port:" msgstr "Port:" #. Type: string #. Description #. :sl5: #: ../s390-netdevice.templates:11001 msgid "Please enter a relative port for this connection." msgstr "Angiv en port for denne forbindelse." #. Type: boolean #. Description #. :sl5: #: ../s390-netdevice.templates:12001 msgid "Use this device in layer2 mode?" msgstr "Benyt denne enhed i lag2-tilstand?" #. Type: boolean #. Description #. :sl5: #: ../s390-netdevice.templates:12001 msgid "" "By default OSA-Express cards use layer3 mode. In that mode LLC headers are " "removed from incoming IPv4 packets. Using the card in layer2 mode will make " "it keep the MAC addresses of IPv4 packets." msgstr "" "Som udgangspunkt benytter OSA-Express kort lag3-tilstand. I denne tilstand, " "fjernes LLC-hoveder fra indkommende IPv4-pakker. Hvis kortet benyttes i lag2-" "tilstand, bevares IPv4-pakkernes MAC-adresser." #. Type: boolean #. Description #. :sl5: #: ../s390-netdevice.templates:13001 msgid "" "The configured parameter is:\n" " peer = ${peer}" msgstr "" "Det opsatte parameter er:\n" " vært = ${peer}" #. Type: string #. Description #. :sl5: #: ../s390-netdevice.templates:14001 msgid "VM peer:" msgstr "VM-vært:" #. Type: string #. Description #. :sl5: #: ../s390-netdevice.templates:14001 msgid "Please enter the name of the VM peer you want to connect to." msgstr "Angiv navnet på den VM-vært (VM-peer), du vil forbinde til." #. Type: string #. Description #. :sl5: #: ../s390-netdevice.templates:14001 msgid "" "If you want to connect to multiple peers, separate the names by colons, e." "g. tcpip:linux1." msgstr "" "Hvis du vil forbinde til flere værter, kan du adskille navnene med kolonner, " "som f.eks. tcpip:linux1." #. Type: string #. Description #. :sl5: #: ../s390-netdevice.templates:14001 msgid "" "The standard TCP/IP server name on VM is TCPIP; on VIF it's $TCPIP. Note: " "IUCV must be enabled in the VM user directory for this driver to work and it " "must be set up on both ends of the communication." msgstr "" "Standardnavnet på en TCP/IP-server på VM er TCPIP, på VIF er det $TCPIP. " "Bemærk: IUCV skal være aktiveret i VM-brugermappen for at denne driver kan " "fungere og det skal sættes op i begge ender af kommunikationen." #. Type: text #. Description #. Main menu item #. :sl5: #: ../s390-netdevice.templates:15001 msgid "Configure the network device" msgstr "Sæt netkortet op" #. Type: select #. Description #. :sl5: #: ../s390-dasd.templates:1002 msgid "Available devices:" msgstr "Tilgængelige enheder:" #. Type: select #. Description #. :sl5: #: ../s390-dasd.templates:1002 msgid "" "The following direct access storage devices (DASD) are available. Please " "select each device you want to use one at a time." msgstr "" "Følgende lagerenheder med direkte adgang (DASD) er tilgængelige. Vælg de " "enheder, du vil benytte en ad gangen." #. Type: string #. Description #. :sl5: #: ../s390-dasd.templates:2001 msgid "Choose device:" msgstr "Vælg enhed:" #. Type: string #. Description #. :sl5: #: ../s390-dasd.templates:2001 msgid "" "Please choose a device. You have to specify the complete device number, " "including leading zeros." msgstr "" "Vælg en enhed. Du skal angive det komplette enhedsnummer inklusive " "foranstillede nuller." #. Type: error #. Description #. :sl5: #: ../s390-dasd.templates:3001 msgid "Invalid device" msgstr "Ugyldig enhed" #. Type: error #. Description #. :sl5: #: ../s390-dasd.templates:3001 msgid "An invalid device number has been chosen." msgstr "Der blev valgt et ugyldigt enhedsnummer." #. Type: boolean #. Description #. :sl5: #: ../s390-dasd.templates:4001 msgid "Format the device?" msgstr "Formatér enheden?" #. Type: boolean #. Description #. :sl5: #: ../s390-dasd.templates:4001 msgid "" "The installer is unable to detect if the device ${device} has already been " "formatted or not. Devices need to be formatted before you can create " "partitions." msgstr "" "Installationsprogrammet kan ikke afgøre, om enheden ${device} allerede er " "blevet formateret eller ej. Enheder skal formateres, før du kan oprette " "partitioner." #. Type: boolean #. Description #. :sl5: #: ../s390-dasd.templates:4001 msgid "" "If you are sure the device has already been correctly formatted, you don't " "need to do so again." msgstr "" "Hvis du er sikker på, at enheden allerede er blevet formateret korrekt, " "behøver du ikke at gøre det igen." #. Type: text #. Description #. :sl5: #: ../s390-dasd.templates:5001 msgid "Formatting ${device}..." msgstr "Formaterer ${device}..." #. Type: text #. Description #. Main menu item. Keep translations below 55 columns #. :sl5: #: ../s390-dasd.templates:6001 msgid "Configure direct access storage devices (DASD)" msgstr "Sæt lagerenheder med direkte adgang (DASD) op" #. Type: text #. Description #. Main menu item #. :sl5: #: ../zipl-installer.templates:1001 msgid "Install the ZIPL boot loader on a hard disk" msgstr "Installér opstartsindlæseren ZIPL på en harddisk"
