On Mon, Sep 01, 2003 at 07:46:53AM +1200, Mike Beattie wrote: > On Sun, Aug 31, 2003 at 12:26:15PM -0400, Sridhar Srinivasan wrote: > > I have a Linksys wireless card that uses the orinoco_cs pcmcia driver. > > The card works fine (for a while) and then I begin to get a huge > > number of errors in the syslog of the form: > > > > Aug 31 11:15:35 hoth kernel: eth1: Error -110 writing Tx descriptor to > > BAP > > I had a lot of those with an old orinoco_cs version, and older firmware on a > prism2 card. > > How about you start by telling us the driver version, and the > chipset/firmware version of your card? (nearly all of this you'll get from > driver as it loads)
These are the messages that are reported in the syslog: (some of the lines are wrapped) Aug 31 21:31:30 hoth kernel: hermes.c: 5 Apr 2002 David Gibson <[EMAIL PROTECTED]> Aug 31 21:31:30 hoth kernel: orinoco.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others) Aug 31 21:31:30 hoth kernel: orinoco_cs.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others) Aug 31 21:31:30 hoth kernel: eth1: Station identity 001f:0002:0001:0004 Aug 31 21:31:30 hoth kernel: eth1: Looks like an Intersil firmware version 1.04 Aug 31 21:31:30 hoth kernel: eth1: Ad-hoc demo mode supported Aug 31 21:31:30 hoth kernel: eth1: IEEE standard IBSS ad-hoc mode supported Aug 31 21:31:30 hoth kernel: eth1: WEP supported, 104-bit key Aug 31 21:31:30 hoth kernel: eth1: MAC address 00:06:25:15:C9:BD Aug 31 21:31:30 hoth kernel: eth1: Station name "Prism I" Aug 31 21:31:30 hoth kernel: eth1: ready Aug 31 21:31:30 hoth kernel: eth1: index 0x01: Vcc 3.3, irq 3, io 0x0100-0x013f So I take it that the driver version is 0.11b and the firmware is Intersil 1.04, correct? thanks for replying, sridhar
