Hi, please do not hijack threads, simple start a new one. Its hard to read, and harder for people in the futures if they try to read the archive to get a solution for their problems.
On Mon, 15 Jän 2007, Jean-Louis Crouzet wrote: > I do not know if this will help but I get a slightly older kernel > running with this adapter. > I have to admit even if I'm not yet under 2.6.19, I'm currently under > Etch 2.6.18-7. > Anyhow I faced to a very annoying issue with a HP Laptop Omnibook900 and > exactly the same Cisco 350 Wireless adapter. > When using the Debian package linux-image package (2.6.18-7) from Debian > the pcmcia card is configured an work like a charm. a look at linux-source-2.6.18 - Linux kernel source for version 2.6.18 with Debian patches reveals that there is no debian specfic patch for that card.. so you should ask that the kernel ML. > But when I do use my own compiled kernel I have always the same problem > (I have tried many .config w/o any success): > - The card is recognized in both cases (Yenta CardBus Bridge) and I do > have equivalent tons of kprintf messages with my compiled airo module I > always have the following: > > airo(eth0): BAP error 4000 0 > airo(eth0): Bad size 2630 > airo(eth0): BAP error 4000 0 > airo(eth0): Bad size 2636 > airo(eth0): airo: BAP setup error too many retries > ... -- Florian Reitmeir
