Hi, On Thu, 04 Oct 2007, Thibaud Hulin wrote:
> I've just acquired a nice hp compaq nx9010 (pentium IV 2,8 Ghz), and I > installed Debian etch on dual boot. > I'm using the applet of gnome to read the cpu. > Unfortunately, I see that the cpu don't work at the realtime of the cpu, 2,8 > , but 1,6 Ghz. many notebooks, only reach their max frequency when attached to AC power. > I tried to use cpufrequtils package, but I failed. > With XP, cpu continue to be normally recognized at 2,6. > I tried to do that : > echo "2790000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq try echo "2790000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq and post us the output of: cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor and cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies maybe you have loaded the "powersave" govenor, which always chooses the lowest speed. -- Florian Reitmeir -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
