Thanks for the insight! > So my guess is the following: > > -Either the AE title that should receive the images is not configured > with IP and port on the server.
It should be configured correctly, because when I run the downloadable pre-compiled version of Ginkgocadx, it uses the same configuration files, and the MOVE operation works. > -Or there is such an AE title's IP and port configured (or even > guessed by the server) but no one is listening at that address. Well, I can do telnet localhost 11112 and get the standard answer Trying 127.0.0.1 Connected to localhost Escape character is ... and the GinkgoCADx side says D: setting network send timeout to 60 seconds D: setting network receive timeout to 60 seconds E: Receiving Association failed: 0006:031a DUL network read timeout Which means the port is open, and listening. It seems that either I introduced some regression when I ported the code - although I barely touched the DCMTK related part - I only changed some constant names, or dcmtk-3.6.1 changed this part with respect to dcmtk-3.6.0 (the version used by the pre-compiled ginkgocadx), and I would need to adjust the parameters of the corresponding DIMSE call. Best, Gert