hi there, i have an indigo2 *currently running* irix 6.5 and i'd like to install debian. i made a serial wire and booted the d-i into the machine with pxe+tftpd.
the kernel reports this scsi error and the d-i doesn't recognize the hard-disk with these messages: ---TROUBLE: target 1.0 not in disconnect queue--- scsi0: Abort - command 128 found on disconnected_Q - Abort SNOOZE. scsi0: Abort - command 129 found on disconnected_Q - Abort SNOOZE. scsi0: Abort - removing command 130 from input_Q. scsi0: Abort - removing command 130 from input_Q. scsi0: Abort - command 143 found on disconnected_Q - Abort SNOOZE. scsi0: Abort - removing command 144 from input_Q. scsi0: Abort - removing command 144 from input_Q. scsi0: Abort - command 146 found on disconnected_Q - Abort SNOOZE. scsi0: Abort - command 163 found on disconnected_Q - Abort SNOOZE. scsi0: Abort - command 180 found on disconnected_Q - Abort SNOOZE. scsi0: Abort - removing command 181 from input_Q. scsi0: Abort - removing command 181 from input_Q. scsi0: Abort - command 182 found on disconnected_Q - Abort SNOOZE. scsi0: reset. sending SDTR 0103013f0csync_xfer=2c sending SDTR 0103013f0csync_xfer=2c sending SDTR 0103013f0csync_xfer=2c sending SDTR 0103013f0csync_xfer=2c sending SDTR 0103013f0csync_xfer=2c sending SDTR 0103013f0csync_xfer=2c sending SDTR 0103013f0csync_xfer=2cscsi0: Abort - command 185 found on disconnected_Q - Abort SNOOZE. scsi0: Abort - removing command 186 from input_Q. scsi0: Abort - removing command 186 from input_Q. scsi0: Abort - command 187 found on disconnected_Q - Abort SNOOZE. scsi0: Abort - command 188 found on disconnected_Q - Abort SNOOZE. scsi0: Abort - command 189 found on disconnected_Q - Abort SNOOZE. scsi0: Abort - removing command 190 from input_Q. scsi0: Abort - removing command 190 from input_Q. scsi0: Abort - command 191 found on disconnected_Q - Abort SNOOZE. scsi0: Abort - removing command 192 from input_Q. scsi0: Abort - removing command 192 from input_Q. scsi0: Aborting connected command 194 - stopping DMA - sending wd33c93 ABORT command - flushing fifo - asr=20, sr=ff, 16777215 bytes un-transferred (timeout=-1) - sending wd33c93 DISCONNECT command - asr=20, sr=16.scsi0: Abort - removing command 194 from input_Q. scsi0: Aborting connected command 195 - stopping DMA - sending wd33c93 ABORT command - flushing fifo - asr=80, sr=22, 0 bytes un-transferred (timeout=1000000) - sending wd33c93 DISCONNECT command - asr=00, sr=22.scsi0: Aborting connected command 195 - stopping DMA - sending wd33c93 ABORT command - flushing fifo - asr=80, sr=22, 0 bytes un-transferred (timeout=1000000) - sending wd33c93 DISCONNECT command - asr=00, sr=22.scsi0: reset. scsi0: warning : SCSI command probably completed successfully before abortion. scsi0: Abort - removing command 186 from input_Q. scsi0: Abort - removing command 187 from input_Q. Starting system log daemon: syslogd, klogd. does this mean the hard disk is broken ? any clue ? full boot log: http://bencer.cauterized.net/tmp/minicom.cap -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
