Hi, Thanks for the quick reply,
On Sat, Aug 28, 2010 at 11:06:58PM +0800, liushiwei wrote: > yeeloong run debia6, just above this 3 patches. > > sm712 patch: > http://www.bjlx.org.cn/loongson2f/squeeze/xserver-xorg-video-siliconmotion/98_sm712_CRT_enable.diff > http://www.bjlx.org.cn/loongson2f/squeeze/xserver-xorg-video-siliconmotion/99_xf86-video-siliconmotion-1.7.3-fix-loongson.diff I get the following error, either when I try to build your package or when I try to apply your second patch: libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../../src -I.. -Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations -Wnested-externs -fno-strict-aliasing -Wbad-function-cast -Wformat=2 -Wold-style-definition -Wdeclaration-after-statement -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -Wall -g -O2 -MT smi_video.lo -MD -MP -MF .deps/smi_video.Tpo -c ../../src/smi_video.c -fPIC -DPIC -o .libs/smi_video.o /tmp/ccBqSRfw.s: Assembler messages: /tmp/ccBqSRfw.s:4469: Error: illegal operands `xor $f0,$f0,$f0' /tmp/ccBqSRfw.s:4470: Error: opcode not supported on this processor: mips1 (mips1) `ldc1 $f4,($6)' /tmp/ccBqSRfw.s:4471: Error: opcode not supported on this processor: mips1 (mips1) `punpcklbh $f2,$f4,$f0' /tmp/ccBqSRfw.s:4472: Error: opcode not supported on this processor: mips1 (mips1) `punpckhbh $f4,$f4,$f0' /tmp/ccBqSRfw.s:4473: Error: opcode not supported on this processor: mips1 (mips1) `ldc1 $f16,8($6)' /tmp/ccBqSRfw.s:4474: Error: opcode not supported on this processor: mips1 (mips1) `punpcklbh $f14,$f16,$f0' /tmp/ccBqSRfw.s:4475: Error: opcode not supported on this processor: mips1 (mips1) `punpckhbh $f16,$f16,$f0' /tmp/ccBqSRfw.s:4478: Error: opcode not supported on this processor: mips1 (mips1) `punpcklbh $f8,$f8,$f12' /tmp/ccBqSRfw.s:4479: Error: opcode not supported on this processor: mips1 (mips1) `punpcklbh $f6,$f0,$f8' /tmp/ccBqSRfw.s:4480: Error: opcode not supported on this processor: mips1 (mips1) `punpckhbh $f8,$f0,$f8' /tmp/ccBqSRfw.s:4483: Error: opcode not supported on this processor: mips1 (mips1) `punpcklbh $f18,$f18,$f12' /tmp/ccBqSRfw.s:4484: Error: opcode not supported on this processor: mips1 (mips1) `punpcklbh $f10,$f0,$f18' /tmp/ccBqSRfw.s:4485: Error: opcode not supported on this processor: mips1 (mips1) `punpckhbh $f12,$f0,$f18' /tmp/ccBqSRfw.s:4486: Error: illegal operands `or $f2,$f2,$f6' /tmp/ccBqSRfw.s:4487: Error: illegal operands `or $f4,$f4,$f8' /tmp/ccBqSRfw.s:4488: Error: illegal operands `or $f14,$f14,$f10' /tmp/ccBqSRfw.s:4489: Error: illegal operands `or $f16,$f16,$f12' /tmp/ccBqSRfw.s:4490: Error: opcode not supported on this processor: mips1 (mips1) `sdc1 $f2,($23)' /tmp/ccBqSRfw.s:4491: Error: opcode not supported on this processor: mips1 (mips1) `sdc1 $f4,8($23)' /tmp/ccBqSRfw.s:4495: Error: opcode not supported on this processor: mips1 (mips1) `sdc1 $f14,0x10($23)' /tmp/ccBqSRfw.s:4496: Error: opcode not supported on this processor: mips1 (mips1) `sdc1 $f16,0x18($23)' /tmp/ccBqSRfw.s:4511: Error: illegal operands `xor $f0,$f0,$f0' /tmp/ccBqSRfw.s:4512: Error: opcode not supported on this processor: mips1 (mips1) `ldc1 $f4,($6)' /tmp/ccBqSRfw.s:4513: Error: opcode not supported on this processor: mips1 (mips1) `punpcklbh $f2,$f4,$f0' /tmp/ccBqSRfw.s:4514: Error: opcode not supported on this processor: mips1 (mips1) `punpckhbh $f4,$f4,$f0' /tmp/ccBqSRfw.s:4517: Error: opcode not supported on this processor: mips1 (mips1) `punpcklbh $f8,$f8,$f12' /tmp/ccBqSRfw.s:4518: Error: opcode not supported on this processor: mips1 (mips1) `punpcklbh $f6,$f0,$f8' /tmp/ccBqSRfw.s:4519: Error: opcode not supported on this processor: mips1 (mips1) `punpckhbh $f8,$f0,$f8' /tmp/ccBqSRfw.s:4520: Error: illegal operands `or $f2,$f2,$f6' /tmp/ccBqSRfw.s:4521: Error: illegal operands `or $f4,$f4,$f8' /tmp/ccBqSRfw.s:4522: Error: opcode not supported on this processor: mips1 (mips1) `sdc1 $f2,($23)' /tmp/ccBqSRfw.s:4523: Error: opcode not supported on this processor: mips1 (mips1) `sdc1 $f4,8($23)' make[3]: *** [smi_video.lo] Error 1 make[3]: Leaving directory `/home/tzafrir/Packs/siliconmotion/sm-loongson-1.7.3/build/src' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/tzafrir/Packs/siliconmotion/sm-loongson-1.7.3/build' make[1]: *** [all] Error 2 make[1]: Leaving directory `/home/tzafrir/Packs/siliconmotion/sm-loongson-1.7.3/build' make: *** [build-stamp] Error 2 > > xorg-server-1.7.7 patch: > http://www.bjlx.org.cn/loongson2f/squeeze/xorg-server/xorg-server-1.7.7_999_loongson-mips-sarea.diff > > > > > /etc/X11/xorg.conf: > http://www.bjlx.org.cn/loongson2f/squeeze/xorg-server/xorg.conf.yeeloong Is there really a need for such a xorg.conf file? -- Tzafrir Cohen | [email protected] | VIM is http://tzafrir.org.il | | a Mutt's [email protected] | | best [email protected] | | friend -- To UNSUBSCRIBE, email to [email protected] with a subject of "unsubscribe". Trouble? Contact [email protected] Archive: http://lists.debian.org/[email protected]
