On Thu, Feb 03, 2005 at 02:39:48PM -0800, Brad Boyer wrote: > On Thu, Feb 03, 2005 at 10:13:17AM -0500, Pedro Sanchez wrote: > > 4. /target/etc/yaboot.config (as installed by the d-i): > > > > boot=/dev/sdb2 > > device=/[EMAIL PROTECTED]/[EMAIL PROTECTED]: > > This last line seems odd. My G5 has only one disk and has a very > similar line for device. That makes me think that it isn't getting > the right OF path for /dev/sdb2. I would have expected the second > drive to be on the second sata channel. Without having a second > device on sata on my G5, I can't really test, but it seems worth > investigating for someone who knows the installer better.
The installer uses ofpath to translate from device nodes to open firmware paths. Pedro: Can you run the following commands in Linux: ofpath /dev/sda ofpath /dev/sdb My guess is that ofpath does not output the correct path for your second harddisk. You can see the whole open firmware device-tree in /proc/device-tree or by entering open firmware and issuing dev / ls If my guess is correct and ofpath does not give you the correct device path then please file a bug on the yaboot package, which contains ofpath. BTW, you can directly load the second-stage yaboot from open firmware with something like this: boot openFirmwarePath:partition,\yaboot If you are new to OpenFirmware you will find some usefull information on http://d-i.alioth.debian.org/manual/en.powerpc/ch05s01.html (look into the usb booting section) Gaudenz
signature.asc
Description: Digital signature