Hi peter, I read: > this is a bit complicated, due to big/little endian issues, perhaps. > I am trying to load the firmware into my hdsp pcmcia card.
what kernel version are you using ? I think there was an endianness bug in alsa some time ago, but it should have been at least fixed in the sources one can get from alsa-project.org (dunno about the kernel, might give 2.6.11 a shot tomorrow and report back.) I don't have the breakoutbox with me so I can't really test this stuff unless I find another one to borrow for an afternoon. > peter:~# hdsploader > hdsploader - firmware loader for RME Hammerfall DSP cards > Looking for HDSP + Multiface or Digiface cards : > Card 0 : PowerMac Screamer Rev 0 > Card 1 : RME Hammerfall DSP at 0xf3000000, irq 58 > Upload firmware for card hw:1 > Hwdep ioctl error on card hw:1 : Input/output error. > > I am using debian testing, running a 2.6.8 kernel with manually compiled > 1.0.8 alsa drivers on a G3 powerpc laptop. ah ok, so it /should/ work, maybe give 1.0.9rc1 a shot ? did you reinsert the card a couple of times and tried to run hdsploader more than once ? good luck, x -- [EMAIL PROTECTED] Postmodernism is german romanticism with better http://pilot.fm/ special effects. (Jeff Keuss / via ctheory.com) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]