hi shouldn't pcmcia-cs tell you these settings need to be fixed during its install or figure the ranges itself? has anyone considered filing a bug report?
could the lspci output be parsed by the install script? hmm. maybe my config, although working, isn't optimal. using a bronze g3 and the ranges came from the pcmcia-cs faq. $ lspci -v ... 00:13.0 CardBus bridge: Texas Instruments PCI1211 Flags: bus master, medium devsel, latency 168, IRQ 22 Memory at 80880000 (32-bit, non-prefetchable) [size=4K] Bus: primary=00, secondary=01, subordinate=01, sec-latency=176 Memory window 0: fd000000-fd3ff000 (prefetchable) Memory window 1: 80000000-803ff000 I/O window 0: 00001000-000010ff I/O window 1: 00001400-000014ff 16-bit legacy interface ports at 0001 $ cat /etc/pcmcia/config.opts ... include port 0x100-0x4ff, port 0x1000-0x17ff include memory 0x80000000-0x80ffffff ... > the resource ranges available to PCMCIA in /etc/pcmcia/config.opts: > > # PowerPC ioports and memory: > include port 0x1000-0x10ff, port 0x1400-0x14ff > include memory 0x80400000-0x807ff000, memory 0xf3000000-0xf33ff000 > > Remove the default ranges. Above is for my TiBook. > > For other machines, get these ranges out of a lspci listing. -- [EMAIL PROTECTED] Brad Midgley