I have a 6-in-1 card reader. On my i386 machine (2.4.20) I attach the card reader and see the following in dmesg:
usb.c: registered new driver usb-storage scsi1 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: Generic CF Rev: 2.5D Type: Direct-Access ANSI SCSI revision: 02 Vendor: Generic Model: Generic MS Rev: 2.5D Type: Direct-Access ANSI SCSI revision: 02 Vendor: Generic Model: Generic MMC/SD Rev: 2.5D Type: Direct-Access ANSI SCSI revision: 02 Vendor: Generic Model: Generic SM Rev: 2.5D Type: Direct-Access ANSI SCSI revision: 02 Under this setup I am able to mount a memory stick put in the card reader as /dev/sdc1. On my iBook (2.4.20-ben6) I insert the same reader, and only see this: usb.c: registered new driver usb-storage scsi1 : SCSI emulation for USB Mass Storage devices Vendor: Generic Model: Generic CF Rev: 2.5D Type: Direct-Access ANSI SCSI revision: 02 So I am restricted to reading CF cards only on the iBook. I have all the same modules loaded: sg, sd_mod. Anybody got any ideas what I'm doing wrong and how to remedy this? Thanks -- Edd
signature.asc
Description: This is a digitally signed message part