First of all thanks for your answer > (**) Chipset ATI Radeon 9100 QM (AGP) found (I >have an radeon 9200)
>You probably override the ChipID in the XF86Config-4 >Device section? Yes, you are right. I override de ChipID in the XF86Config-4, but if I don´t use this option the XFree86.0.log says "no device found" or something like that, I can fix this??? > You need uninorth_agp with a 2.6 kernel. I will rebuild my kernel and try it, what you recommend, built-in or as a module?? Thanks Manuel ----- Original Message ----- From: "Michel Dänzer" <[EMAIL PROTECTED]> To: "Manuel García Urreta" <[EMAIL PROTECTED]> Cc: <debian-powerpc@lists.debian.org> Sent: Friday, January 09, 2004 3:01 PM Subject: Re: IBook G4, kernel 2.6, DRM, Xfree86 and some questions ??? > On Thu, 2004-01-08 at 14:38, Manuel García Urreta wrote: > > > > I finally get working Xfree with 3D accel. in my iBook G4 1Ghz, radeon 9200, > > 14''. > > [...] > > > 2) Then I start X server, and all start perfectly, then i switch to a > > virtual terminal and start > > reading the /var/log/XFree86.0.log file, i noticed some errors: > > > > /****************/ > > (II) LoadModule: "GLcore" > > (II) Loading /usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a > > Skipping > > "/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_clip.o": > > No symbols found > > Skipping > > "/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_norm.o": > > No symbols found > > Skipping > > "/usr/X11R6/lib/modules-dri-trunk/extensions/libGLcore.a:m_debug_xform.o": > > No symbols found > > (II) LoadModule: "speedo" > > (II) Loading /usr/X11R6/lib/modules-dri-trunk/fonts/libspeedo.a > > Skipping > > "/usr/X11R6/lib/modules-dri-trunk/fonts/libspeedo.a:spencode.o": No symbols > > found > > Harmless. > > > > (**) Chipset ATI Radeon 9100 QM (AGP) found (I have an radeon 9200) > > You probably override the ChipID in the XF86Config-4 Device section? > > > > drmOpenDevice: minor is 0 > > drmOpenDevice: node name is /dev/dri/card0 > > drmOpenDevice: open result is 8, (OK) > > drmGetBusid returned '' > > Harmless. > > > > (WW) RADEON(0): [agp] AGP not available > > (WW) RADEON(0): [agp] AGP failed to initialize -- falling back to PCI > > mode. > > (WW) RADEON(0): [agp] If this is an AGP card, you may want to make sure > > the agpgart > > kernel module is loaded before the radeon kernel module. > > > > I am sure agpgart is loaded in the kernel > > You need uninorth_agp with a 2.6 kernel. > > > The direct rendering appear to be enable (in Xfree86.0.log say that), but > > when i run glxgears I get only 547 FPS, i know that this video card is > > better than that. > > Should be better with AGP. > > > It shouldn't have been too hard to find most if not all of this > information in the list archives. > > > -- > Earthling Michel Dänzer | Debian (powerpc), X and DRI developer > Software libre enthusiast | http://svcs.affero.net/rm.php?r=daenzer > > -- > Este mensaje ha sido analizado por DeMonteGrande.com.ar MailScanner > en busca de virus y otros contenidos peligrosos, y se considera que > est limpio. -- Este mensaje ha sido analizado por DeMonteGrande.com.ar MailScanner en busca de virus y otros contenidos peligrosos, y se considera que est�impio.