On Sun, Jan 11, 2004 at 03:30:07PM +0100, [EMAIL PROTECTED] wrote: > Hi, > > Luis Sanjuan a écrit : > >On Sun, Jan 11, 2004 at 04:47:49AM +0100, Sven Herzberg, GNOME Deutschland > >wrote: > > > >>Hi, > >> > >> today I tried to get burning working with my new Powerbook 15". Has > >>anyone of you already burnt successfully with the PBook? > > > > > >Succes here as well with CD burning on an AlBook 17" (now without SCSI > >emulation): > > > >cdrecord -dev=/dev/hdc <your-image-file> > > > > The docuumentation of cdrecord says the syntax is : > dev=ATAPI:bus,target,lun >
Thanks for your advise, Eric. '-dev=/dev/hdc' option is a recomendation I've read in many documents about 2.5-2.6 migration. For example: http://www.linux.org.uk/~davej/docs/post-halloween-2.6.txt http://lwn.net/Articles/13160/ Greetings. > So, now, how to find the good device ? > > For example : > > cdrecord -scanbus -dev=ATAPI give : > > alube:/home/eric# cdrecord -scanbus -dev=ATAPI > Cdrecord-Clone 2.01a19 (powerpc-unknown-linux-gnu) Copyright (C) > 1995-2003 Jörg Schilling > scsidev: 'ATAPI' > devname: 'ATAPI' > scsibus: -2 target: -2 lun: -2 > Warning: Using ATA Packet interface. > Warning: The related libscg interface code is in pre alpha. > Warning: There may be fatal problems. > Using libscg version 'schily-0.7' > scsibus0: > 0,0,0 0) 'MATSHITA' 'DVD-R UJ-816 ' 'DXJ3' Removable CD-ROM > 0,1,0 1) * > 0,2,0 2) * > 0,3,0 3) * > 0,4,0 4) * > 0,5,0 5) * > 0,6,0 6) * > 0,7,0 7) * > > > So, for direct CD-burning, you'll have to do : > > cdrecord -v image.iso speed=supported_speed dev=ATAPI:bus,target,lun > > BTW : first : what is new is "ATAPI:", secondly I don't know the > supported speed value ] > > > Finally, a good command line is : > > > cdrecord -v image.iso speed=supported_speed dev=ATAPI:0,0,0 > > > >DVD burning not tested. > > > > For DVD burning, you'll have to download the powerpc version of > cdreocrd-dvd-pro, called, if I'm not wrong, > "cdrecord-prodvd-2.0-powerpc-unknown-linux-gnu" on the cdrecord ftp > site. (free for personnal use) > > I think You'll have to ask a key. For this, read the doc carefully. > > > > > > Regards, > eric > > > -- > NO ePATENTS / NON AUX BREVETS SUR LES LOGICIELS. See / Voir > http://swpat.ffii.org/ > > eric bachard > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact > [EMAIL PROTECTED] >