Brad Boyer wrote:
What does it do when you try cmd-opt-o-f? Have you explicitly set the
output-device and input-device? OF is pretty dumb about auto-detecting
which devices you want to use for your console. Early models defaulted
to using the serial ports, but most G3 based models default to using
ADB keyboard and built-in video, if possible.
One problem may be that the primary (i.e. built-in) display adapter
on this box failed a couple of years ago. We've been using the PCI video
board ever since (at least until my wife decided she'd had enough of
Macs and got a Windows laptop. Yeah, I know, I tried to tell her....).
So a normal MacOS boot on this box goes something like this:
- Turn on the power
- Listen to chime
- Watch pretty blank screen for about a minute. Monitor shows "No sync".
- Then admire nice grey screen, which eventually shows a nice MacOS logo
and boot proceeds normally.
When I press cmd-opt-o-f (should I do this with power off and turn
the box on while holding them down, or can I do it a bit later? If so,
how long do you get to do it?), I get the same sequence as that above.
It may, of course, be trying to display the OF console on the primary
adapter, but I have no way of telling. How do I set OF's input and
output devices?
Thanks,
.....Ron
--
Ron Murray ([EMAIL PROTECTED])
http://www.rjmx.net/~ron
GPG Public Key Fingerprint: F2C1 FC47 5EF7 0317 133C D66B 8ADA A3C4
D86C 74DE