[I hope this is the right list.] I have a G3 (Gossamer) running sid, which hasn't been updated for fairly long time. I installed linux-image-2.6.16-1-powerpc, but it fails to boot. I tried the last few versions (9-12). I see the initial message
Welcome to Linux, kernel 2.6.16-1-powerpc Linked at : 0xc00..... Frame buffer at : 0x........ (phys), 0xx.... (log) klimit : 0......... boot_info at : 0......... MSR : 0......... PUR : 0......... HID0 : 0......... ICTC : 0......... Total space used by parameters & ramdisk: 00503000 Preparing boot params... Preparing BAT... pmac_init():exit id mach():done MMU:enter MMU:hw init hash:enter hash:find piece hash:batch hash:done MMU:mapin MMU:setio MMU:exit and it stays forever. I use BootX 1.2.2, if it matters, ramdisk size 8192. I copy vmlinux-2.6.16-1-powerpc and initrd.img-2.6.16-powerpc to the MuckOS partition and point to them, as usual. My current kernel is 2.6.8 and it boots fine. What am I doing wrong? Thanks in advance. -- "Every non-free program has a lord, a master -- and if you use the program, he is your master." --RMS -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]