Hello. I attemped to install Debian Etch on a IBM JS20 using an iso from 09/22/2006. The install works correctly until it tries (and fails) to detect the PATA hard drive. None of the modules listed will work with it.
When I install SuSE 9.1 on the same blade, it shows the hard drive in the logs as: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx AMD8111: IDE controller at PCI slot 0000:00:04.1 AMD8111: chipset revision 3 AMD8111: 0000:00:04.1 (rev 03) UDMA133 controller AMD8111: 100% native mode on irq 32 ide0: BM-DMA at 0x7c00-0x7c07, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x7c08-0x7c0f, BIOS settings: hdc:pio, hdd:pio Probing IDE interface ide0... hda: FUJITSU MHT2040AS, ATA DISK drive Unhandled interrupt 20, disabled ide0 at 0x7400-0x7407,0x6c02 on irq 32 Probing IDE interface ide1... Probing IDE interface ide1... hda: max request size: 128KiB hda: 78140160 sectors (40007 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 hda3 I'm presuming that the AMD8111 chipset is not currently supported under Debian Etch for PPC. Am I wrong, or is there another explanation? Thanks! Mat -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]