-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi,
Georg Heinrich wrote: > I don't get wlan with wpa working on my powerbook g4 with etch. you probably need bcm43xxx-fwcutter package. i wrote up how i got mine working: http://travelsoforion.net/debian-wireless --asm > This is the lspci output: > > 0001:10:12:0 Network controller: Broadcom Corporation BCM4306 802.11b/g > Wireless LAN Controller (rev 03) > > This is my /etc/network/interfaces file: > > auto eth2 > iface eth2 inet manual > wpa-sriver wext > wpa-roam /etc/wpa_supplicant/wpa_supplicant.conf > > iface office inet dhcp > > iface anywhere inet dhcp > > This is my /etc/wpa_supplicant/wpa_supplicant.conf: > > ctrl_interface=/var/run/wpa_supplicant > > network={ > id_str="office" > ssid="gh-office-wlan" # = airport network name > psk="64-byte hex-string obtained with wpa_passphrase" > } > > network={ > id_str="anywhere" > ssid="" > key_mgmt=NONE > } > > The network-admin says "wireless network eth2 active" but under > properties, the network is not selected. It appears in the pop-up menu > though and I can select it, but afterwards ping returns "network unreachable". > There is no wpa_action.log file in /var/log. > > Any ideas? > Thanks in advance, > > G. Heinrich > > > -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGX7MlDSUj23OxwYIRAttGAJ9B6+iDUglYiKtQxCTSo4Ue049ttgCaAyt1 4OQzNl8d0O9xO6CA5+FUjTU= =kYYw -----END PGP SIGNATURE----- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]