Thank you for the reply.
Michel Dänzer wrote:
On Wed, 2007-09-05 at 14:40 +0200, Eugen Dedu wrote:
I own a PowerBook G4
Titanium or aluminium? What panel size?
Aluminium.
snoopy:~$ cat /proc/cpuinfo
processor : 0
cpu : 7447/7457, altivec supported
clock : 612.000000MHz
revision : 0.1 (pvr 8002 0101)
bogomips : 36.73
timebase : 18432000
platform : PowerMac
machine : PowerBook5,2
motherboard : PowerBook5,2 MacRISC3 Power Macintosh
detected as : 287 (PowerBook G4 15")
pmac flags : 0000001b
L2 cache : 512K unified
pmac-generation : NewWorld
Sorry, how to find the panel size? The resolution of the laptop screen
is 1280x854.
snoopy:~$ grep -i panel /var/log/Xorg.0.log
(II) RADEON(0): Existing panel PLL dividers will be used.
(WW) RADEON(0): Panel size 1280x854 is derived, this may not be correct.
If not, use PanelSize option to overwrite this setting
(EE) RADEON(0): Panel size is not correctly detected.
Please try to use PanelSize option for correct settings.
(II) RADEON(0): Panel infos found from DDC detailed: 1280x854
(II) RADEON(0): Panel infos found from DDC VESA/EDID: 1280x1024
and I do not succeed in using the 2nd monitor after
using these steps (I am not an Xorg specialist):
1. Add Option ... in xorg.conf
... what?
Option "MacModel" "powerbook"
2. Restart computer and enter X
3. snoopy:~$ xrandr -q
Screen 0: minimum 320 x 200, current 1280 x 854, maximum 1280 x 1280
LVDS connected 1280x854+0+0 (normal left inverted right x axis y axis)
0mm x 0mm
1280x854 60.0*+
1280x800 60.0
1280x768 60.0
1024x768 60.0
800x600 60.3
640x480 59.9
VGA-0 disconnected (normal left inverted right x axis y axis)
If you specify
Option "MacModel" "powerbook"
or "powerbook-duallink", the above should say DVI-0 instead of VGA-0.
However, it prints VGA-0...
Note: I have just upgraded xbase-clients and xutils to 1:7.3~rc1, the
test from my previous email was with xbase-clients 1:7.1.ds.3-1 and
xutils 1:7.2.ds2-2. I redid the steps from my previous email, the same
output is shown except that I have some information about S-video:
snoopy:~$ xrandr -q
Screen 0: minimum 320 x 200, current 1280 x 854, maximum 1280 x 1280
LVDS connected 1280x854+0+0 (normal left inverted right x axis y axis)
0mm x 0mm
1280x854 60.0*+
1280x800 60.0
1280x768 60.0
1024x768 60.0
800x600 60.3
640x480 59.9
VGA-0 connected (normal left inverted right x axis y axis)
1280x1024 60.0 + 59.9
1280x960 59.9
1024x768 60.0
800x600 60.3
640x480 60.0
720x400 70.1
S-video disconnected 800x600+0+0 (normal left inverted right x axis y
axis) 0mm x 0mm
800x600 (0x55) 38.2MHz
h: width 800 start 832 end 912 total 1024 skew 0 clock
37.4KHz
v: height 600 start 603 end 607 total 624 clock
59.9Hz
Thank you,
--
Eugen Dedu
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]