I am running a ppc mac mini with the broadcom chip (bcm4306); am running
debian unstable with kernel 2.6.26-1; have just updated with apt-get
hoping this would ix the problem but it didn't. My wireless suddenly
stopped working--using airport extreme--but still works fine on the mac
side of the computer. /var/log/messages shows all the broadcom components
being loaded but shows link not ready when brought up. cat /proc/net/dev
shows wlan0_rename (also a eth1) but all zeros. The relevant part of lspci
-knn shows:
0001:10:12.0 Network controller [0280]: Broadcom Corporation BCM4306 802.11b/g
Wireless LAN Controller [14e4:4320] (rev 03)
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
I did make the firmware changes as instructed with the 2.6.25 kernel
and this problem didn't occur when I changed to 2.6.26.
Has anybody had
this happen and are there other tests I should run or other
logs in which I need to look to find out wt is wrong?
tia.
--
Cheryl
"Where your treasure is,
there will your heart be also."
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
