Hey everyone, I picked up a dual G5 2.5GHz Power Mac the other day. It has the AGP NVIDIA GeForce 6800 Ultra card installed. I was hoping to get the nouveau driver with 2D acceleration working with it, but I have been struggling.
I stumbled on this article here: http://powerpcliberation.blogspot.com/2015/07/g5-nouveau-2d-acceleration.html and recompiled a 3.16.7 kernel from the Debian sources with 4k page sizes instead of the default 64k kernel page size. I also confirmed that the system is not using MSI interrupts. When I boot, I just get a black screen after the system tries to start lightdm, a dmesg reveals this: [ 28.113131] [drm:drm_edid_block_valid] *ERROR* EDID checksum is invalid, remainder is 163 [ 28.113138] Raw EDID: [ 28.113141] c0 00 00 01 65 d8 ca a0 c0 00 00 01 64 20 60 00 [ 28.113143] c0 00 00 01 65 7a 0e 00 00 00 00 00 00 00 00 00 [ 28.113145] c0 00 00 01 64 20 1d 00 00 00 00 00 00 00 00 01 [ 28.113147] c0 00 00 01 64 17 f0 00 c0 00 00 01 65 d8 ca a0 [ 28.113149] c0 00 00 01 64 20 50 00 c0 00 00 01 65 5f 05 00 [ 28.113151] 00 00 00 00 00 00 00 00 c0 00 00 01 64 20 1c e0 [ 28.113153] 00 00 00 00 00 00 00 01 c0 00 00 01 65 79 f1 00 [ 28.113155] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 and some other messages like this: [ 138.991484] nouveau E[Xorg[837]] failed to idle channel 0xcccc0000 [Xorg[837]] Booting with nouveau.noaccel=1 works, but the software 2D acceleration makes the system unusable. Any suggestions where to go from here? I know getting an ATI card is the easy way out, but I'd like to get this 6800 Ultra I have to work if possible. Thanks for your time! Logan Anteau
