Package: hplip Version: 3.20.9+dfsg0-4 Severity: important Dear Maintainer,
The hplip package was update in testing from 3.20.5+dfsg0-3+b1 to 3.20.9+dfsg0-4 After which I'm no longer able to install my network HP LaserJet MFP M148 printer. Installing the printer using hp-setup -i fails with the following: hp-setup -i -a -x 192.168.89.196 HP Linux Imaging and Printing System (ver. 3.20.9) Printer/Fax Setup Utility ver. 9.0 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. -------------------------------- | SELECT CONNECTION (I/O) TYPE | -------------------------------- Num Connection Description Type -------- ---------- ---------------------------------------------------------- 0* usb Universal Serial Bus (USB) 1 net Network/Ethernet/Wireless (direct connection or JetDirect) Enter number 0...1 for connection type (q=quit, enter=usb*) ? 1 Using connection type: net error: No device selected/specified or that supports this functionality. I can print to the printer using the KDE cups connection: implicitclass://HP_LaserJet_Pro_M148fdw_E27AD3_/ Thank you, Andrew -- Package-specific info: Saving output in log file: /home/andrew/Downloads/hp-check.log HP Linux Imaging and Printing System (ver. 3.20.9) Dependency/Version Check Utility ver. 15.1 Copyright (c) 2001-18 HP Development Company, LP This software comes with ABSOLUTELY NO WARRANTY. This is free software, and you are welcome to distribute it under certain conditions. See COPYING file for more details. Note: hp-check can be run in three modes: 1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP. 2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run. 3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies). Check types: a. EXTERNALDEP - External Dependencies b. GENERALDEP - General Dependencies (required both at compile and run time) c. COMPILEDEP - Compile time Dependencies d. [All are run-time checks] PYEXT SCANCONF QUEUES PERMISSION Status Types: OK MISSING - Missing Dependency or Permission or Plug-in INCOMPAT - Incompatible dependency-version or Plugin-version warning: debian-testing version is not supported. Using debian-10.4 versions dependencies to verify and install... --------------- | SYSTEM INFO | --------------- Kernel: 5.9.0-3-amd64 #1 SMP Debian 5.9.9-1 (2020-11-19) GNU/Linux Host: workhorse Proc: 5.9.0-3-amd64 #1 SMP Debian 5.9.9-1 (2020-11-19) GNU/Linux Distribution: debian testing Bitness: 64 bit ----------------------- | HPLIP CONFIGURATION | ----------------------- HPLIP-Version: HPLIP 3.20.9 HPLIP-Home: /usr/share/hplip warning: HPLIP-Installation: Auto installation is not supported for debian distro testing version Current contents of '/etc/hp/hplip.conf' file: # hplip.conf. Generated from hplip.conf.in by configure. [hplip] version=3.20.9 [dirs] home=/usr/share/hplip run=/var/run ppd=/usr/share/ppd/hplip/HP ppdbase=/usr/share/ppd/hplip doc=/usr/share/doc/hplip html=/usr/share/doc/hplip-doc icon=no cupsbackend=/usr/lib/cups/backend cupsfilter=/usr/lib/cups/filter drv=/usr/share/cups/drv bin=/usr/bin apparmor=/etc/apparmor.d # Following values are determined at configure time and cannot be changed. [configure] network-build=yes libusb01-build=no pp-build=no gui-build=yes scanner-build=yes fax-build=yes dbus-build=yes cups11-build=no doc-build=yes shadow-build=no hpijs-install=yes foomatic-drv-install=yes foomatic-ppd-install=no foomatic-rip-hplip-install=no hpcups-install=yes cups-drv-install=yes cups-ppd-install=no internal-tag=3.20.9 restricted-build=no ui-toolkit=qt5 qt3=no qt4=no qt5=yes policy-kit=yes lite-build=no udev_sysfs_rules=no hpcups-only-build=no hpijs-only-build=no apparmor_build=no class-driver=no Current contents of '/var/lib/hp/hplip.state' file: [plugin] installed = 1 eula = 1 version = 3.20.9 Current contents of '~/.hplip/hplip.conf' file: [commands] scan = /usr/bin/xsane -V %SANE_URI% [fax] email_address = voice_phone = [installation] date_time = 12/01/20 17:00:07 version = 3.20.9 [last_used] device_uri = "hp:/net/HP_LaserJet_Pro_M148f-M149f?ip=192.168.89.196" printer_name = HP_LaserJet_Pro_M148f-M149f working_dir = /home/andrew/Documents/Downloads/hplip-3.19.1-plugin.run [polling] device_list = enable = false interval = 5 [refresh] enable = true rate = 30 type = 1 [settings] systray_messages = 0 systray_visible = 0 [upgrade] last_upgraded_time = 1521572661 notify_upgrade = false pending_upgrade_time = 0 <Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment> ------------------------- | External Dependencies | ------------------------- error: cups CUPS - Common Unix Printing System REQUIRED 1.1 - INCOMPAT 'CUPS may not be installed or not running' gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.52 OK - xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK - scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.31 OK - error: dbus DBus - Message bus system REQUIRED - 1.12.20 MISSING 'DBUS may not be installed or not running' policykit PolicyKit - Administrative policy framework OPTIONAL - 0.105 OK - network network -wget OPTIONAL - 1.20.3 OK - error: avahi-utils avahi-utils OPTIONAL - - MISSING 'avahi-utils needs to be installed' ------------------------ | General Dependencies | ------------------------ error: libjpeg libjpeg - JPEG library REQUIRED - - MISSING 'libjpeg needs to be installed' error: cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - - MISSING 'cups-devel needs to be installed' error: cups-image CUPS image - CUPS image development files REQUIRED - - MISSING 'cups-image needs to be installed' libpthread libpthread - POSIX threads library REQUIRED - b'2.31' OK - error: libusb libusb - USB library REQUIRED - 1.0 MISSING 'libusb needs to be installed' sane SANE - Scanning library REQUIRED - - OK - error: sane-devel SANE - Scanning library development files REQUIRED - - MISSING 'sane-devel needs to be installed' error: libavahi-dev libavahi-dev REQUIRED - - MISSING 'libavahi-dev needs to be installed' error: libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 - MISSING 'libnetsnmp-devel needs to be installed' error: libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 MISSING 'libcrypto needs to be installed' python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.8.6 OK - python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK - error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed' error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed' python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK - python3-xml Python XML libraries REQUIRED - 2.2.10 OK - error: python3-devel Python devel - Python development files REQUIRED 2.2 3.8.6 MISSING 'python3-devel needs to be installed' python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 8.0.1 OK - python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.55 OK - -------------- | COMPILEDEP | -------------- error: libtool libtool - Library building support services REQUIRED - - MISSING 'libtool needs to be installed' gcc gcc - GNU Project C and C++ Compiler REQUIRED - 10.2.0 OK - make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK - --------------------- | Python Extentions | --------------------- cupsext CUPS-Extension REQUIRED - 3.20.9 OK - hpmudext IO-Extension REQUIRED - 3.20.9 OK - ---------------------- | Scan Configuration | ---------------------- '/etc/sane.d/dll.d/hpaio' not found. hpaio HPLIP-SANE-Backend REQUIRED - 3.20.9 OK 'hpaio found in /etc/sane.d/dll.conf' scanext Scan-SANE-Extension REQUIRED - 3.20.9 OK - ------------------------------ | DISCOVERED SCANNER DEVICES | ------------------------------ device `escl:https://192.168.89.196:443' is a HP LaserJet Pro M148fdw (E27AD3) flatbed scanner device `hpaio:/net/hp_laserjet_pro_m148f-m149f?ip=192.168.89.196&queue=false' is a Hewlett-Packard hp_laserjet_pro_m148f-m149f all-in-one device `escl:https://192.168.89.196:443' is a HP LaserJet Pro M148fdw (E27AD3) flatbed scanner device `hpaio:/net/hp_laserjet_pro_m148f-m149f?ip=192.168.89.196&queue=false' is a Hewlett-Packard hp_laserjet_pro_m148f-m149f all-in-one -------------------------- | DISCOVERED USB DEVICES | -------------------------- No devices found. --------------------------------- | INSTALLED CUPS PRINTER QUEUES | --------------------------------- HP_LaserJet_Pro_M148fdw_E27AD3_ ------------------------------- Type: Unknown Device URI: implicitclass://HP_LaserJet_Pro_M148fdw_E27AD3_/ PPD: /etc/cups/ppd/HP_LaserJet_Pro_M148fdw_E27AD3_.ppd warning: Failed to read /etc/cups/ppd/HP_LaserJet_Pro_M148fdw_E27AD3_.ppd ppd file PPD Description: Printer status: printer HP_LaserJet_Pro_M148fdw_E27AD3_ is idle. enabled since Tue Dec 1 09:02:35 2020 warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices. -------------- | PERMISSION | -------------- ----------- | SUMMARY | ----------- Missing Required Dependencies ----------------------------- error: 'cups' package is missing or 'cups' service is not running. error: 'libcups2' package is missing/incompatible error: 'libdbus-1-dev' package is missing/incompatible error: 'libjpeg62-turbo-dev' package is missing/incompatible error: 'libcups2-dev' package is missing/incompatible error: 'cups-bsd' package is missing/incompatible error: 'cups-client' package is missing/incompatible error: 'libcupsimage2' package is missing/incompatible error: 'libcupsimage2-dev' package is missing/incompatible error: 'libusb-1.0.0-dev' package is missing/incompatible error: 'libsane-dev' package is missing/incompatible error: 'libavahi-client-dev' package is missing/incompatible error: 'libavahi-core-dev' package is missing/incompatible error: 'libavahi-common-dev' package is missing/incompatible error: 'libsnmp-dev' package is missing/incompatible error: 'snmp' package is missing/incompatible error: 'libssl-dev' package is missing/incompatible error: 'python3-pyqt4' package is missing/incompatible error: 'gtk2-engines-pixbuf' package is missing/incompatible error: 'python3-dev' package is missing/incompatible error: 'libtool' package is missing/incompatible error: 'libtool-bin' package is missing/incompatible Missing Optional Dependencies ----------------------------- error: 'avahi-utils' package is missing/incompatible error: 'python3-dbus.mainloop.qt' package is missing/incompatible Total Errors: 15 Total Warnings: 1 Done. -- System Information: Debian Release: bullseye/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.9.0-3-amd64 (SMP w/8 CPU threads) Kernel taint flags: TAINT_WARN, TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages hplip depends on: ii adduser 3.118 ii cups 2.3.3op1-2 ii hplip-data 3.20.9+dfsg0-4 ii libc6 2.31-4 ii libcups2 2.3.3op1-2 ii libdbus-1-3 1.12.20-1 ii libhpmud0 3.20.9+dfsg0-4 ii libpython3.8 3.8.6-1 ii libsane-hpaio 3.20.9+dfsg0-4 ii libsane1 1.0.31-3 ii lsb-base 11.1.0 ii printer-driver-hpcups 3.20.9+dfsg0-4 ii python3 3.8.6-1 ii python3-dbus 1.2.16-4 ii python3-gi 3.38.0-1+b1 ii python3-pexpect 4.6.0-4 ii python3-pil 8.0.1-1 ii python3-reportlab 3.5.55-1 ii wget 1.20.3-1+b3 ii xz-utils 5.2.4-1+b1 Versions of packages hplip recommends: ii avahi-daemon 0.8-3 ii policykit-1 0.105-29 ii printer-driver-postscript-hp 3.20.9+dfsg0-4 ii sane-utils 1.0.31-3 Versions of packages hplip suggests: pn hplip-doc <none> ii hplip-gui 3.20.9+dfsg0-4 ii python3-notify2 0.3-4 ii system-config-printer 1.5.12-1 -- no debconf information