On the related PC there is up to now no mailer installed. Therefor I'm worrying if my report was sent and has arrived the buglist. ---------------------------------------------- I'm not able to configure lilo for the actual installation. Hardware: Three SCSI HD's with three different systems which should be started simultaniously. First HD SCSI ID=0; 4,5 GB SEAGATE ; Sarge (testing) with Kernel 2.4 Second HD SCSI ID=2; 16GB SEAGATE; FreeBSD 4.10 Third HD SCSI ID=3; 4,4GB Maxtor: Sarge (testing) with Kernel 2.6
Each system can be started easily selecting the individual HD by BIOS. I can not addjust LILO on the first disk to start each system. I tried few variants, changing the bootpartition /dev/sda, /dev/sda1. Installing lilo on the third (last) HD resulted in quite the same problem. Bevor I had SuSE 8.1 (ID=0) respectivly 9.1 (ID=3) installed. Installing of lilo was no problem. Unfortunately I can not say what version of lilo I used. I had to edit /etc/lilo.conf and run /sbin/lilo ---------------------------------------------- boot="/dev/sda" lba32 prompt timeout="10000" root=/dev/sda1 # linear delay=0 lock vga="Frage" default=linux image="/boot/vmlinuz-2.4.26-1-386" label="Sarge 2.4" root="/boot/vmlinuz-2.4.26-1-386" # read-only initrd="/boot/initrd.img-2.4.26-1-386" vga="Standar" other=/dev/sdb1 label="FreeBSD 4.10" other=/dev/sdc1 label="Sarge 2.6" ----------------------------------------------------------------------- Die Einstellungen sind nicht in Ordnung. Ausgabe von LILO: LILO version 22.5.9 (test mode), Copyright (C) 1992-1998 Werner Almesberger Development beyond version 21 Copyright (C) 1999-2004 John Coffman Released 08-Apr-2004, and compiled at 15:30:00 on Aug 15 2004 Debian GNU/Linux Reading boot sector from /dev/sda Warning: '/proc/partitions' does not match '/dev' directory structure. Name change: '/dev/scsi/host0/bus0/target1/lun0/disc' -> '/dev/sda' Name change: '/dev/scsi/host0/bus0/target1/lun0/part1' -> '/dev/sda1' Name change: '/dev/scsi/host0/bus0/target1/lun0/part2' -> '/dev/sda2' Name change: '/dev/scsi/host0/bus0/target1/lun0/part5' -> '/dev/sda5' Name change: '/dev/scsi/host0/bus0/target1/lun0/part6' -> '/dev/sda6' Name change: '/dev/scsi/host0/bus0/target1/lun0/part7' -> '/dev/sda7' Name change: '/dev/scsi/host0/bus0/target1/lun0/part8' -> '/dev/sda8' Name change: '/dev/scsi/host0/bus0/target1/lun0/part9' -> '/dev/sda9' Name change: '/dev/scsi/host0/bus0/target2/lun0/disc' -> '/dev/sdb' Name change: '/dev/scsi/host0/bus0/target2/lun0/part1' -> '/dev/sdb1' Name change: '/dev/scsi/host0/bus0/target2/lun0/part5' -> '/dev/sdb5' Name change: '/dev/scsi/host0/bus0/target2/lun0/part6' -> '/dev/sdb6' Name change: '/dev/scsi/host0/bus0/target2/lun0/part7' -> '/dev/sdb7' Name change: '/dev/scsi/host0/bus0/target2/lun0/part8' -> '/dev/sdb8' Name change: '/dev/scsi/host0/bus0/target2/lun0/part9' -> '/dev/sdb9' Name change: '/dev/scsi/host0/bus0/target2/lun0/part10' -> '/dev/sdb10' Name change: '/dev/scsi/host0/bus0/target3/lun0/disc' -> '/dev/sdc' Name change: '/dev/scsi/host0/bus0/target3/lun0/part1' -> '/dev/sdc1' Name change: '/dev/scsi/host0/bus0/target3/lun0/part2' -> '/dev/sdc2' Name change: '/dev/scsi/host0/bus0/target3/lun0/part5' -> '/dev/sdc5' Using MENU secondary loader Calling map_insert_data Fatal: Not a number: "Standar"