Добрый день. Столкнулся со следующей проблемой: PQI CoolDrive 512М при включении в мою машину не работает:
Apr 29 12:42:22 zulu kernel: usb 4-6: new high speed USB device using ehci_hcd and address 6 Apr 29 12:42:23 zulu kernel: usb 3-2: new full speed USB device using uhci_hcd and address 4 Apr 29 12:42:23 zulu kernel: usb 3-2: device descriptor read/64, error -71 Apr 29 12:42:23 zulu kernel: usb 3-2: device descriptor read/64, error -71 Apr 29 12:42:23 zulu kernel: usb 3-2: new full speed USB device using uhci_hcd and address 5 Apr 29 12:42:23 zulu kernel: usb 3-2: device descriptor read/64, error -71 Ядро 2.6.10, дебиановское из Сид. При этом при включении в соседнюю машину с таким же ядром работает: Apr 29 12:48:14 localhost kernel: usb 2-1: new full speed USB device using uhci_hcd and address 3 Apr 29 12:48:16 localhost kernel: SCSI subsystem initialized Apr 29 12:48:16 localhost kernel: Initializing USB Mass Storage driver... Apr 29 12:48:16 localhost kernel: scsi0 : SCSI emulation for USB Mass Storage devices Apr 29 12:48:16 localhost kernel: usbcore: registered new driver usb-storage Apr 29 12:48:16 localhost kernel: USB Mass Storage support registered. Apr 29 12:48:16 localhost kernel: usb-storage: device found at 3 Apr 29 12:48:16 localhost kernel: usb-storage: waiting for device to settle before scanning Apr 29 12:48:16 localhost usb.agent[21647]: usb-storage: loaded successfully Apr 29 12:48:21 localhost kernel: Vendor: Generic Model: USB Flash Disk Rev: 2.00 Apr 29 12:48:21 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02 Apr 29 12:48:21 localhost kernel: usb-storage: device scan complete Apr 29 12:48:21 localhost scsi.agent[21757]: disk at /devices/pci0000:00/0000:00 В третью машину с 2.4.27 -- тоже работает. Не работает только с моей. У кого-то есть идеи, в какую сторону смотреть? На какую железную/софтварную особенность? -- WBR, Alexander A. Vlasov Debian GNU/Linux user JID: [EMAIL PROTECTED] nic-hdl: ZULU-UANIC -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
