Hello Vladimir, Monday, October 7, 2002, 9:34:56 PM, you wrote:
VIU> Hello, All. VIU> Можно ли через samba и lpd заставить работать вин-принтер hp laserjet VIU> 1000w. В фильтре ifhp написано, что он поддерживает hp 1000 series с VIU> помощью фильтра модели hp1100. Через lpr не печатает, а вместо этого VIU> вешается lpd, а в messages написано, что из usblp0 не получен ответ 0, VIU> а вместо него получен -32. То же самое, если ставлю принтер без VIU> фильтра и печатаю из под винды виндовым драйвером через самбу. VIU> -- VIU> Vladimir I. Umnov mailto:[EMAIL PROTECTED] У меня та-же проблемма. HP LaserJet 1000. Пробовал настроить но пока ничего из этого не вышло :((( Писал в HP Support. Вот, что они ответили: ********************************************************************** Thank you for contacting the Product Support Technical Center at the new HP. The LaserJet 1000 uses a host-based printing system and requires a Windows operating system to function properly. The host-based software uses the computer's resources to process print commands and rasterize the data, taking advantage of the computer's memory and processing power. Only a rasterized data image (completely formatted image) is sent to the printer. This speeds up the print time and reduces the number of "out of memory" problems. Host-based printing differs from PCL printing in that the print job is processed on the host computer, rather than in the printer formatter. The HP LaserJet 1000 Series printer delivers LaserJet printing through a direct (local) universal serial bus (USB) connection to a computer. HP supports USB connection only with Windows 98, Windows Millennium Edition (Me), Windows 2000, and Windows XP. NOTE: The HP LaserJet 1000 Series printer software is not supported in Windows 3.1x, Windows 95, Windows NT, Windows XP Professional Edition (64-bit), or Windows Terminal Server versions. The software also is not supported in non-Microsoft operating systems such as Macintosh, UNIX (R), Linux, or OS/2 Warp. Unfortunately, we do not have a solution for the HP LaserJet 1000 and Samba. Once again, thank you for contacting the Product Support Technical Center at the new HP. NOTE: Our advice is strictly limited to the question(s) asked and is based on the information provided to us. Problems and solutions may depend on the nature of your system environment and various other parameters that are unknown to HP; therefore, HP cannot assume any responsibility or liability. Please be advised that technical information changes as new data becomes available, therefore, HP recommends that you check back at our Customer Care web site located at http://www.hp.com/cposupport/eschome.html regularly for possible updates. Hewlett-Packard shall not be liable for any direct, indirect, special, incidental or consequential damages in connection with the use of this information. Original Message Follows: ------------------------- This message has been rerouted to you by the HP.COM email router. If this message has been sent to you in error, please forward back to the email router mailbox at REROUTER,HPCOM per HP email directory. Original message follows: ------------------------- ***Support Folks, Please send your response DIRECTLY TO THE CUSTOMER. Shauna Silence HP Services ---------- Original Message: Hi, we have some problem with samba printing on Hp LaserJet 1000 installed on USB Port on a Windows Client. The samba runs on a Suse8.0 with default installation. The command we use is: ------------------ smbclient \\\\hostname\\printer_share_name -P -U lp -N smb: \> print /etc/hosts putting file /etc/hosts as hosts-12063 (96.0 kb/s) (average 96.0 kb/s) smb: \> ------------------ as you can see the output seems to be correct, in fact, using the above command with another printer shared (connected to a windows client via lpt1 instead of usb) it works. The question is: Do you know how we can make a SHARED USB PRINTER work with samba? ****************************************************************** Если у вас получиться настроить этот принтер, пожалуйста дайте знать, вопрос остаётся открытым. -- Best regards, K. mailto:[EMAIL PROTECTED]
