Привет! Решил для начала действительно почитать XFree86 Video Timings HOWTO. Сразу же наткнулся на странное место: Why This HOWTO Is Obsolete
For 4.0.0 and later versions of XFree86, you no longer have to generate modelines at all under most circumstances. Instead they are computed internally by the server at startup time, based on the resolution you specify in the Modes part of the Screen section part of your XFree86 configuration file and the monitor capabilities your X server gets via an EDID query to the monitor. Therefore, the information in the remainder of this HOWTO is useful only if (a) you have an old, pre-EDID monitor, or (b) your graphics-card driver doesn't support querying the monitor, or (c) you are running an old version of XFree86 (in which case, you should fix your problem by upgrading), or (d) your monitor/card combination can support a resolution above 1920 x 1440 or below 640 x 480, which is the range over which XFree86 has canned modelines. Получается, modline вообще можно не указывать... ======== Alexey Buistov, Software Engineer, Miratech Ltd. 41 Nauki Ave, 03028 Kiev, Ukraine, tel: +38 044 206 4090 ext number +38 044 206 4099 fax: +38 044 206 4091 ICQ: 83154650 http://www.miratech.ua mailto:[EMAIL PROTECTED] -----Original Message----- From: ilgiz kalmetev [mailto:[EMAIL PROTECTED] Sent: Monday, December 01, 2003 9:47 AM To: Debian List Subject: Re: modline Здравствуйте, Alexey. Вы писали 1 декабря 2003 г., 12:24:50: AB> Пытаюсь выставить себе режим [EMAIL PROTECTED] Для этого мне нужна в XF86Config-е AB> строчка modline, которой я там не наблюдаю. AB> Не подскажете, где ее можно достать (определить)? AB> В пределах одной модели моников она, предполагаю, одинаковая? AB> Тогда мож кто поделится своей? Моник у меня Veiwsonic E771 1) Запустить xvidtune. Подстроить изображение как нужно. Нажать кнопку show и скопировать полученное значение в строчку Modeline файла XF86Config. 2) Почитать XFree86 Video Timings HOWTO 3) Поискать в Интернете 4) apt-cache search modeline apt-get install videogen -- С уважением, ilgiz mailto:[EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]