Вы писали 4 апреля 2006 г., 19:30:19: >> я правильно понял, что порядок модулей нужно менять в /etc/modules? >> какой модуль для рейда прописывать? > raid5 помойму.
да, есть такой. блин, это невезение какое-то... не создается массив.. dmesg прикладываю cat /etc/modules ide-cd ide-disk ide-generic psmouse sd_mod sata_nv raid5 cat /etc/mdadm/mdadm.conf DEVICE partitions ARRAY /dev/md0 level=raid5 num-devices=4 UUID=bd69238b:33ed4bea:6921c83c:a87ece5a Помогите до конца это дело разрулить, пожалуйста.
supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (24) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 01 per-CPU timeslice cutoff: 731.32 usecs. task migration cache decay timeout: 1 msecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Total of 1 processors activated (5521.40 BogoMIPS). ENABLING IO-APIC IRQs init IO_APIC IRQs IO-APIC (apicid-pin) 4-16, 4-17, 4-18, 4-19, 4-20, 4-21, 4-22, 4-23 not connected. ..TIMER: vector=0x31 pin1=0 pin2=-1 Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 2799.0766 MHz. ..... host bus clock speed is 133.0322 MHz. Brought up 1 CPUs CPU0: online domain 0: span 01 groups: 01 domain 1: span 01 groups: 01 checking if image is initramfs...it isn't (ungzip failed); looks like an initrd Freeing initrd memory: 4484k freed NET: Registered protocol family 16 PCI: PCI BIOS revision 3.00 entry at 0xf2590, last bus=2 PCI: Using MMCONFIG mtrr: v2.0 (20020519) ACPI: Subsystem revision 20040326 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (00:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:12.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 *5 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 5 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled. ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled. ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled. ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled. ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled. ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled. ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fc410 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc440, dseg 0xf0000 PnPBIOS: 16 nodes reported by PnP BIOS; 16 recorded by driver PCI: Using ACPI for IRQ routing ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23 ACPI: PCI interrupt 0000:00:0a.1[A] -> GSI 23 (level, low) -> IRQ 177 ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 22 (level, low) -> IRQ 185 ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:0b.1[B] -> GSI 21 (level, low) -> IRQ 193 ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20 ACPI: PCI interrupt 0000:00:0b.2[C] -> GSI 20 (level, low) -> IRQ 201 ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 23 (level, low) -> IRQ 177 ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22 ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 185 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21 ACPI: PCI interrupt 0000:00:13.0[A] -> GSI 21 (level, low) -> IRQ 193 ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209 ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19 ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 19 (level, low) -> IRQ 217 number of MP IRQ sources: 16. number of IO-APIC #4 registers: 24. testing the IO APIC....................... IO APIC #4...... .... register #00: 04000000 ....... : physical APIC id: 04 ....... : Delivery Type: 0 ....... : LTS : 0 .... register #01: 00170011 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0011 .... register #02: 04000000 ....... : arbitration: 04 .... IRQ redirection table: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: 00 001 01 0 0 0 0 0 1 1 31 01 001 01 0 0 0 0 0 1 1 39 02 001 01 0 0 0 0 0 1 1 41 03 001 01 0 0 0 0 0 1 1 49 04 001 01 0 0 0 0 0 1 1 51 05 001 01 0 0 0 0 0 1 1 59 06 001 01 0 0 0 0 0 1 1 61 07 001 01 0 0 0 0 0 1 1 69 08 001 01 0 0 0 0 0 1 1 71 09 001 01 0 1 0 0 0 1 1 79 0a 001 01 0 0 0 0 0 1 1 81 0b 001 01 0 0 0 0 0 1 1 89 0c 001 01 0 0 0 0 0 1 1 91 0d 001 01 0 0 0 0 0 1 1 99 0e 001 01 0 0 0 0 0 1 1 A1 0f 001 01 0 0 0 0 0 1 1 A9 10 001 01 1 1 0 1 0 1 1 D1 11 000 00 1 0 0 0 0 0 0 00 12 000 00 1 0 0 0 0 0 0 00 13 001 01 1 1 0 1 0 1 1 D9 14 001 01 1 1 0 1 0 1 1 C9 15 001 01 1 1 0 1 0 1 1 C1 16 001 01 1 1 0 1 0 1 1 B9 17 001 01 1 1 0 1 0 1 1 B1 Using vector-based indexing IRQ to pin mappings: IRQ0 -> 0:0 IRQ1 -> 0:1 IRQ2 -> 0:2 IRQ3 -> 0:3 IRQ4 -> 0:4 IRQ5 -> 0:5 IRQ6 -> 0:6 IRQ7 -> 0:7 IRQ8 -> 0:8 IRQ9 -> 0:9 IRQ10 -> 0:10 IRQ11 -> 0:11 IRQ12 -> 0:12 IRQ13 -> 0:13 IRQ14 -> 0:14 IRQ15 -> 0:15 IRQ209 -> 0:16 IRQ217 -> 0:19 IRQ201 -> 0:20 IRQ193 -> 0:21 IRQ185 -> 0:22 IRQ177 -> 0:23 .................................... done. vesafb: framebuffer at 0xc0000000, mapped to 0xf880a000, size 3072k vesafb: mode is 1024x768x16, linelength=2048, pages=1 vesafb: protected mode interface info at c000:d6b0 vesafb: scrolling: redraw vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device vga16fb: initializing vga16fb: mapped to 0xc00a0000 fb1: VGA16 VGA frame buffer device highmem bounce pool size: 64 pages VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED]) devfs: boot_options: 0x0 Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found bootsplash: scanning last 2MB of initrd for signature bootsplash 3.1.6-2004/03/31: looking for picture... no good signature found. Console: switching to colour frame buffer device 128x48 Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 input: AT Translated Set 2 keyboard on isa0060/serio0 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 ACPI: (supports S0 S1 S3 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4484 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 164k freed vesafb: disagrees about version of symbol struct_module NET: Registered protocol family 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx NFORCE-MCP04: IDE controller at PCI slot 0000:00:0f.0 NFORCE-MCP04: chipset revision 242 NFORCE-MCP04: not 100% native mode: will probe irqs later NFORCE-MCP04: 0000:00:0f.0 (rev f2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA hdc: ST3200822A, ATA DISK drive hdd: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive Using anticipatory io scheduler ide1 at 0x170-0x177,0x376 on irq 15 hdc: max request size: 1024KiB hdc: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(33) /dev/ide/host0/bus1/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 > kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding 4200956k swap on /dev/hdc5. Priority:-1 extents:1 EXT3 FS on hdc1, internal journal Generic RTC Driver v1.07 hdd: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 SCSI subsystem initialized libata version 1.02 loaded. mice: PS/2 mouse device common for all mice ts: Compaq touchscreen protocol output sata_nv version 0.02 ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 23 (level, low) -> IRQ 177 PCI: Setting latency timer of device 0000:00:10.0 to 64 ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xC800 irq 177 ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xC808 irq 177 nv_sata: Primary device added ata1: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata1: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata1: dev 0 configured for UDMA/133 scsi0 : sata_nv nv_sata: Secondary device added ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata2: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata2: dev 0 configured for UDMA/133 scsi1 : sata_nv Vendor: ATA Model: ST3250824AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back /dev/scsi/host0/bus0/target0/lun0: p1 Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250824AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdb: drive cache: write back /dev/scsi/host1/bus0/target0/lun0: p1 Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 ACPI: PCI interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:11.0 to 64 ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xDC00 irq 185 ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xDC08 irq 185 nv_sata: Primary device added ata3: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata3: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata3: dev 0 configured for UDMA/133 scsi2 : sata_nv nv_sata: Secondary device added ata4: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f ata4: dev 0 ATA, max UDMA/133, 488397168 sectors: lba48 ata4: dev 0 configured for UDMA/133 scsi3 : sata_nv Vendor: ATA Model: ST3250824AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdc: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdc: drive cache: write back /dev/scsi/host2/bus0/target0/lun0: p1 Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0 Vendor: ATA Model: ST3250824AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sdd: drive cache: write back /dev/scsi/host3/bus0/target0/lun0: p1 Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0 raid5: automatically using best checksumming function: pIII_sse pIII_sse : 4404.000 MB/sec raid5: using function: pIII_sse (4404.000 MB/sec) md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: raid5 personality registered as nr 4 md: md0 stopped. kjournald starting. Commit interval 5 seconds EXT3 FS on hdc6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdc7, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on hdc8, internal journal EXT3-fs: mounted filesystem with ordered data mode. EXT3-fs: unable to read superblock loop: loaded (max 8 devices) ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A e1000: Ignoring new-style parameters in presence of obsolete ones Intel(R) PRO/1000 Network Driver - version 5.2.52-k4 Copyright (c) 1999-2004 Intel Corporation. ACPI: PCI interrupt 0000:02:0c.0[A] -> GSI 19 (level, low) -> IRQ 217 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex NET: Registered protocol family 10 Disabled Privacy Extensions on device c032cd40(lo) IPv6 over IPv4 tunneling driver bootsplash 3.1.6-2004/03/31: looking for picture.... found (1024x768, 67122 bytes, v3). bootsplash: status on console 1 changed to on bootsplash 3.1.6-2004/03/31: looking for picture.... found (1024x768, 67122 bytes, v3). bootsplash: status on console 2 changed to on bootsplash 3.1.6-2004/03/31: looking for picture.... found (1024x768, 67122 bytes, v3). bootsplash: status on console 3 changed to on bootsplash 3.1.6-2004/03/31: looking for picture.... found (1024x768, 67122 bytes, v3). bootsplash: status on console 4 changed to on bootsplash 3.1.6-2004/03/31: looking for picture.... found (1024x768, 67122 bytes, v3). bootsplash: status on console 5 changed to on ip_tables: (C) 2000-2002 Netfilter core team eth0: no IPv6 routers present md: md0 stopped.