Привет Всем!
Есть винт 250G. Мат. плата Soltek SL-65ME+ i815E. Биос не поддерживает LBA 48 bit и доступно только 137G. Возможно использовать всю поверхность диска без покупки дополнительного контроллера? ######################################################### hdparm -I /dev/hda /dev/hda: ATA device, with non-removable media Model Number: SAMSUNG SP2514N Firmware Revision: VF100-33 Standards: Supported: 7 6 5 4 Likely used: 7 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 device size with M = 1024*1024: 131071 MBytes device size with M = 1000*1000: 137438 MBytes (137 GB) Capabilities: LBA, IORDY(can be disabled) Queue depth: 1 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 16 Current = ? Recommended acoustic management value: 254, current value: 254 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=240ns IORDY flow control=120ns Commands/features: Enabled Supported: * NOP cmd * READ BUFFER cmd * WRITE BUFFER cmd * Host Protected Area feature set * Look-ahead * Write cache * Power Management feature set Security Mode feature set * SMART feature set * Mandatory FLUSH CACHE command * Device Configuration Overlay feature set * Automatic Acoustic Management feature set SET MAX security extension SET FEATURES subcommand required to spinup after power up Power-Up In Standby feature set * DOWNLOAD MICROCODE cmd * General Purpose Logging feature set * SMART self-test * SMART error logging Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count supported: enhanced erase 120min for SECURITY ERASE UNIT. 120min for ENHANCED SECURITY ERASE UNIT. HW reset results: CBLID- above Vih Device num = 0 determined by the jumper Checksum: correct ########################################################### -- Павел -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]